- Joined
- Dec 25, 2007
- Messages
- 822
- Reaction score
- 53
- Points
- 28
- Location
- Cambridgeshire
- Website
- www.matteasom.com
Hi Guys, I just picked up my RS4 calipers and carriers from my friendly neighbourhood powder coater; they've come out fantastic! Couldn't be happier and so will finally be fitting everything Friday night/Saturday.
I've not done anything like this before, but I'll be working with a couple of guys who have to ensure everything's done correctly. I'm fairly sure I know what is involved and have been researching for a couple of months but to avoid calling the guys over only to find I'm missing a vital element, just thought I'd run this checklist past you guys...
This is everything I have ready...
Along with your standard workshop tools I've also bought...
If there's anything else I've overlooked please let me know.
Thanks.
If you're interested, my B5 RS4 brake rebuild thread is here...
http://www.audi-sport.net/vb/showthread.php?t=83631
I'll be updating it this evening to show the sand-blasted parts and the powder coating.
I've not done anything like this before, but I'll be working with a couple of guys who have to ensure everything's done correctly. I'm fairly sure I know what is involved and have been researching for a couple of months but to avoid calling the guys over only to find I'm missing a vital element, just thought I'd run this checklist past you guys...
This is everything I have ready...
- RS4 Discs
- EBC redstuff pads
- RS4 calipers
- RS4 carriers
- RS4 dust sheilds
- HEL RS4 braided brake lines
- Replacement seals, dust-boots and guide-pin bushes
- Brake grease/ copper grease
- Brake cleaner (apparently for the discs?)
- Brake fluid (DOT 5.1?)
Along with your standard workshop tools I've also bought...
- 'Eezibleed' brake bleed kit
- Caliper piston tool
If there's anything else I've overlooked please let me know.
Thanks.
If you're interested, my B5 RS4 brake rebuild thread is here...
http://www.audi-sport.net/vb/showthread.php?t=83631
I'll be updating it this evening to show the sand-blasted parts and the powder coating.