cruise control retro-fit

[yoda01]

Hi
Have a problem with ABS/ESP lights on since I did a cruise control retro-fit
to my Audi A4 1.9 TDI 130bhp 6-speed manual trans 2003 (Euro spec.)
Engine code AVF gear box code GBA
I am using hex-com and Vag-com Release 311-2

The fitting or the cruise control is complete, clear instructions came with the kit.
The instruction call for the car to be sent a main dealer after install.
But I have Vag-com + hex-com lead so I am hoping to do this job myself
Kit included stalk and new control module 8E0 953 549 P

All I need is to sort this problem out and the job is finished
01044 - Control module incorrectly coded 35-00
00778 Steering angle (G85) 66-10 - not matched

Control module 8E0 614517 ABS/ESP front 3429
soft coding 0000 shop WSC 00000

Attempted recode using login 09495 and recode 04395 followed by steering
calibration.
But not working

Can you let me know if I am using the correct login and recode numbers
for Control module 8E0 614517

Please help
yoda01

 

[carbon]

hi,
could realy need your help.
ive got the same problem.
cruise,dis fitted.
cant get the abs coded,its staying 00000..
also getting warnings up in the dis.
did you figure it out?

regards

 

[swarcup]

this may be of help, full coding instructions and explanations https://docs.google.com/fileview?id...YTY4ZS00ODg1LWFiNDUtMTg4YzEyZDc1NjEz&hl=en_GB, its all about working out login codes from what i have read, also this is of use http://www.tyresmoke.net/forum/audi-a4-s4-cabrio/68576-retro-fitting-dis-cruise-a4-b6.html
pick through the info and you should be ok.