Monster MotorsportVolks Autos
Page 1 of 2 12 LastLast
Results 1 to 40 of 48
Like Tree4Likes

Thread: Double din cage fitting problems

  1. #1
    dale86's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Oct 2012
    Posts
    355

    Double din cage fitting problems

    Hi I'm on fitting a double Din cage to my car so I can fit RNSd but I'm struggling getting my centre console back in. Shud it slide straight back in or are the centre consoles different for a double Din set up ? Any help would be greatly appreciated thanks.

  2. # ADS
    ADS
    Join Date
    Always
    Posts
    Many
     
  3. #2
    mattyboyc's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Sep 2009
    Posts
    1,222
    The centre console is different for double din but shouldn't stop it going back in it only requires a bit of trimming to house the climate unit.
    Have a look here.

    Last edited by mattyboyc; 24th April 2014 at 05:04.
    A4 AVANT 1.9TDI 130 SPORT:
    18" RS6'S//TWIN EXHAUST//ALLARD EGR DELETE//AERO WIPERS//B7 KEYS & ENGINE COVERS//BLACK OPTICS //FRONT & REAR S-LINE BUMPERS//TAILGATE SPOILER//S4 HEADLIGHTS,GRILLS & DOOR BLADES//RS4 RARB & PEDALS//FRONT,REAR & FOOTWELL AMBIENT LIGHTING//PUDDLE LIGHTS//FAN JETS//MEDIA SYSTEM//T.V//7" HEADREST MONITORS//REAR BLINDS//REVERSE CAMERA// CRUISE & DIS


  4. #3
    5th Gear

    Status
    Offline
    Join Date
    Feb 2012
    Location
    Pie eating land
    Posts
    1,341

    My Social Networking

    Follow ruffrida On Twitter Visit ruffrida's Youtube Channel
    Will have to have a better look at this when mine comes, HU (B7 concert) unit arrived yesterday, leads and cage should be here today hopefully.
    B6 1.9tdi Quattro Avant Sport:
    My Build Thread = http://www.audi-sport.net/vb/a4-a4-c...so-begins.html

    Coming soon: -35mm Springs, Colour coded FOG grills, Trip stalk upgrade.
    Wish List; FMIC, BV43 turbo, Bigger Remap, Fat Clutch,Full Stainless, S4 Brakes, 5m mspacers - front, 10mm spacers rear, MFSW.

  5. #4
    Mike.M's Avatar
    6th Gear

    Status
    Online
    Join Date
    Oct 2003
    Location
    Dorset
    Posts
    1,566
    As above........you have to trim the inside edges of the single din console to get it to fit the new double din
    Mike

    B6 A4 1.9 TDI Sport 130 - GMBH/S-Line kit - Akoya Silver
    - BUILD THREAD >>

  6. #5
    5th Gear

    Status
    Offline
    Join Date
    Feb 2012
    Location
    Pie eating land
    Posts
    1,341

    My Social Networking

    Follow ruffrida On Twitter Visit ruffrida's Youtube Channel
    Ooooh right, im fitting full double din cage and HU, is the a sticky for this?
    B6 1.9tdi Quattro Avant Sport:
    My Build Thread = http://www.audi-sport.net/vb/a4-a4-c...so-begins.html

    Coming soon: -35mm Springs, Colour coded FOG grills, Trip stalk upgrade.
    Wish List; FMIC, BV43 turbo, Bigger Remap, Fat Clutch,Full Stainless, S4 Brakes, 5m mspacers - front, 10mm spacers rear, MFSW.

  7. #6
    dale86's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Oct 2012
    Posts
    355
    Ahh I think I know how to finish this now is their any measurements or is it a educated guess situation lol.

  8. #7
    5th Gear

    Status
    Offline
    Join Date
    Feb 2012
    Location
    Pie eating land
    Posts
    1,341

    My Social Networking

    Follow ruffrida On Twitter Visit ruffrida's Youtube Channel
    Just found this great link;
    http://www.ranno.net/audi/RNSeInA4.pdf
    B6 1.9tdi Quattro Avant Sport:
    My Build Thread = http://www.audi-sport.net/vb/a4-a4-c...so-begins.html

    Coming soon: -35mm Springs, Colour coded FOG grills, Trip stalk upgrade.
    Wish List; FMIC, BV43 turbo, Bigger Remap, Fat Clutch,Full Stainless, S4 Brakes, 5m mspacers - front, 10mm spacers rear, MFSW.

  9. #8
    SmoothAssault's Avatar
    Will design for mods

    Status
    Offline
    Join Date
    Dec 2007
    Location
    Cambridgeshire
    Posts
    788
    For reference, here's Double DIN and single DIN consoles next to each other...

    Sandra and ruffrida like this.

    FOR SALE: Eibach Sportline Springs from B5 A4. £50 - PM for details.

  10. #9
    dale86's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Oct 2012
    Posts
    355
    Is this part visible what I'll be cutting just I don't want to make a hash of it is says it's not in one of the posts above but I'd like a definate answer chaps so I know whether I can just close my eyes and cut or have to take measure ments and make it look good.

  11. #10
    AviatorRichards3's Avatar
    Neutral

    Status
    Offline
    Join Date
    Oct 2012
    Location
    Hertfordshire
    Posts
    52
    Not sure if you have seen these two threads about doing exactly what your trying to do:

    Audi A3 S3 8L Concert II to Double Din RNS-D Rare Satnav Installed in a 2002 Audi S3

    RNS-D install (not RNS-E)

    There is another better option the trimming the climate control unit down and or the cage itself, which is just look on ebay for the unit that fits down the bottom (where the cubby hole would go on the concert II system) and this way its the unit designed to go there, so no dodgy trimming needed which is so hard to get right (in my eyes anyway).

    AUDI A3 HEATER CLIMATE CONTROL SWITCH UNIT 1997 - 2003 HAS WEAR ON BUTTONS | eBay

    I think that should be the one that goes right at the bottom of the stack (but dont quote me 100%)

    but i would definitely stay away from trimming unless you absolutely refuse to buy the new unit....I personally couldnt have handled seeing those cut edges everyday..

    Let me know how you get on

    Anton

  12. #11
    mattyboyc's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Sep 2009
    Posts
    1,222
    If you are going to refit your original stuff back in the car for re-sale you will need a new console as there will be two visible gaps when the single din stuff is put back in.
    A4 AVANT 1.9TDI 130 SPORT:
    18" RS6'S//TWIN EXHAUST//ALLARD EGR DELETE//AERO WIPERS//B7 KEYS & ENGINE COVERS//BLACK OPTICS //FRONT & REAR S-LINE BUMPERS//TAILGATE SPOILER//S4 HEADLIGHTS,GRILLS & DOOR BLADES//RS4 RARB & PEDALS//FRONT,REAR & FOOTWELL AMBIENT LIGHTING//PUDDLE LIGHTS//FAN JETS//MEDIA SYSTEM//T.V//7" HEADREST MONITORS//REAR BLINDS//REVERSE CAMERA// CRUISE & DIS


  13. #12
    5th Gear

    Status
    Offline
    Join Date
    Feb 2012
    Location
    Pie eating land
    Posts
    1,341

    My Social Networking

    Follow ruffrida On Twitter Visit ruffrida's Youtube Channel
    Sorry to have a brain laps here, so you only trim the console if you have a single din console but want to fit a double din, with a double din cage??

    Its not hard to do but i am confussed!!
    B6 1.9tdi Quattro Avant Sport:
    My Build Thread = http://www.audi-sport.net/vb/a4-a4-c...so-begins.html

    Coming soon: -35mm Springs, Colour coded FOG grills, Trip stalk upgrade.
    Wish List; FMIC, BV43 turbo, Bigger Remap, Fat Clutch,Full Stainless, S4 Brakes, 5m mspacers - front, 10mm spacers rear, MFSW.

  14. #13
    No Gear

    Status
    Offline
    Join Date
    Dec 2012
    Location
    Shropshire
    Posts
    331
    Sounds about right dude.

  15. #14
    dale86's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Oct 2012
    Posts
    355
    I had single din and now have just fitted double Din cage and can't get centre console back in so yeah it sounds like I need to cut awway I'll.prob just sell car with it all in.

  16. #15
    5th Gear

    Status
    Offline
    Join Date
    Feb 2012
    Location
    Pie eating land
    Posts
    1,341

    My Social Networking

    Follow ruffrida On Twitter Visit ruffrida's Youtube Channel
    Nice 1 BakPak lol
    B6 1.9tdi Quattro Avant Sport:
    My Build Thread = http://www.audi-sport.net/vb/a4-a4-c...so-begins.html

    Coming soon: -35mm Springs, Colour coded FOG grills, Trip stalk upgrade.
    Wish List; FMIC, BV43 turbo, Bigger Remap, Fat Clutch,Full Stainless, S4 Brakes, 5m mspacers - front, 10mm spacers rear, MFSW.

  17. #16
    5th Gear

    Status
    Offline
    Join Date
    Feb 2012
    Location
    Pie eating land
    Posts
    1,341

    My Social Networking

    Follow ruffrida On Twitter Visit ruffrida's Youtube Channel
    Quote Originally Posted by dale86 View Post
    I had single din and now have just fitted double Din cage and can't get centre console back in so yeah it sounds like I need to cut awway I'll.prob just sell car with it all in.
    Wow this is the first i have heard of this, the is even a short vid on youtube Audi A4 Single to Double Din Conversion Pioneer Avic F930BT - YouTube it is only short so dont show the full details, was looking forward to this,now sounds a bit of a pain in the arse!!
    B6 1.9tdi Quattro Avant Sport:
    My Build Thread = http://www.audi-sport.net/vb/a4-a4-c...so-begins.html

    Coming soon: -35mm Springs, Colour coded FOG grills, Trip stalk upgrade.
    Wish List; FMIC, BV43 turbo, Bigger Remap, Fat Clutch,Full Stainless, S4 Brakes, 5m mspacers - front, 10mm spacers rear, MFSW.

  18. #17
    dale86's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Oct 2012
    Posts
    355
    Yeah I seen that Vid cuts a lot out it's fairly useless I thought all I had to do was change it to double Din or I probably wouldn't have done it lol

  19. #18
    SmoothAssault's Avatar
    Will design for mods

    Status
    Offline
    Join Date
    Dec 2007
    Location
    Cambridgeshire
    Posts
    788
    The cuts you make to the single DIN console to get it to fit the double DIN cage aren't visible once everything is installed into it.

    It never seems to be documented but the single din and double din ashtrays are also different.

    Where single din has the cubby hole below the climate unit (the rubberised area behind the ashtray), OEM double din setup doesn't have this, and the console doesn't have the slots to accept this part. Instead the double din ashtray has a extra plastic section that covers the 8-10mm gap between the ashtray lid and the base of the climate control unit.

    When cutting down a single din console you could also cut down the cubby hole 'floor'? 'base'? (I don't know what you'd want to call it), so that it meets the back of the single din ash tray and doesn't leave you with a hole that you're bound to lose your house keys in, or these days, even your whole phone could probably disappear down the gap. Or you could try and source a double din ashtray.

    You also have to get hold off a double din climate unit, the single din ones don't fit unless you trim down the edges (scary job).

    FOR SALE: Eibach Sportline Springs from B5 A4. £50 - PM for details.

  20. #19
    5th Gear

    Status
    Offline
    Join Date
    Feb 2012
    Location
    Pie eating land
    Posts
    1,341

    My Social Networking

    Follow ruffrida On Twitter Visit ruffrida's Youtube Channel
    I have seen a few double din conversions with the single din climate fitted. Who ever does this next needs take detailed pics and notes to get all this out the way!
    B6 1.9tdi Quattro Avant Sport:
    My Build Thread = http://www.audi-sport.net/vb/a4-a4-c...so-begins.html

    Coming soon: -35mm Springs, Colour coded FOG grills, Trip stalk upgrade.
    Wish List; FMIC, BV43 turbo, Bigger Remap, Fat Clutch,Full Stainless, S4 Brakes, 5m mspacers - front, 10mm spacers rear, MFSW.

  21. #20
    SmoothAssault's Avatar
    Will design for mods

    Status
    Offline
    Join Date
    Dec 2007
    Location
    Cambridgeshire
    Posts
    788
    Yea, mine is a single DIN unit fitted in the double din cage. I had to take maybe 6-8mm off each side to get it to fit though.

    I've got loads of photos, just not had any time to document the whole process yet.

    FOR SALE: Eibach Sportline Springs from B5 A4. £50 - PM for details.

  22. #21
    5th Gear

    Status
    Offline
    Join Date
    Feb 2012
    Location
    Pie eating land
    Posts
    1,341

    My Social Networking

    Follow ruffrida On Twitter Visit ruffrida's Youtube Channel
    Noway did ya,yeh get it wrote up with some pics,sure it will be made a sticky
    B6 1.9tdi Quattro Avant Sport:
    My Build Thread = http://www.audi-sport.net/vb/a4-a4-c...so-begins.html

    Coming soon: -35mm Springs, Colour coded FOG grills, Trip stalk upgrade.
    Wish List; FMIC, BV43 turbo, Bigger Remap, Fat Clutch,Full Stainless, S4 Brakes, 5m mspacers - front, 10mm spacers rear, MFSW.

  23. #22
    dale86's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Oct 2012
    Posts
    355
    Thanks for clearing that up smoothasault but now you open up a whole other can of worms about a gap I'll be left with and the ash tray not fitting properly my cars in bits and I need it back together people will think I'm going for the stripped out look lol.

  24. #23
    5th Gear

    Status
    Offline
    Join Date
    Feb 2012
    Location
    Pie eating land
    Posts
    1,341

    My Social Networking

    Follow ruffrida On Twitter Visit ruffrida's Youtube Channel
    Quote Originally Posted by dale86 View Post
    Thanks for clearing that up smoothasault but now you open up a whole other can of worms about a gap I'll be left with and the ash tray not fitting properly my cars in bits and I need it back together people will think I'm going for the stripped out look lol.
    A whole new look and meaning to ratrod lol.

    In the thread link i put on it shows that you have to trim something near the ashtray to get rid of that gap!!
    B6 1.9tdi Quattro Avant Sport:
    My Build Thread = http://www.audi-sport.net/vb/a4-a4-c...so-begins.html

    Coming soon: -35mm Springs, Colour coded FOG grills, Trip stalk upgrade.
    Wish List; FMIC, BV43 turbo, Bigger Remap, Fat Clutch,Full Stainless, S4 Brakes, 5m mspacers - front, 10mm spacers rear, MFSW.

  25. #24
    SmoothAssault's Avatar
    Will design for mods

    Status
    Offline
    Join Date
    Dec 2007
    Location
    Cambridgeshire
    Posts
    788
    Final image from this blog post about my Alcantara dash install shows the extent of the gap you'll be left with. Like I said, it's only around 8-10mm without the double din ashtray that has the extra little flap to cover it.

    Audi A4 Alcantara Dash (part 2) | Matt Easom

    I did my conversion at the end of last year and I've archived all my photos from 2013 onto my PC at home. So I have them, but they're not accessible while I'm at work. If I have time this evening I'll post up any other images that you guys might find useful.

    FOR SALE: Eibach Sportline Springs from B5 A4. £50 - PM for details.

  26. #25
    5th Gear

    Status
    Offline
    Join Date
    Feb 2012
    Location
    Pie eating land
    Posts
    1,341

    My Social Networking

    Follow ruffrida On Twitter Visit ruffrida's Youtube Channel
    See what ya mean, ya would lose everything down that lol, nice ash though
    B6 1.9tdi Quattro Avant Sport:
    My Build Thread = http://www.audi-sport.net/vb/a4-a4-c...so-begins.html

    Coming soon: -35mm Springs, Colour coded FOG grills, Trip stalk upgrade.
    Wish List; FMIC, BV43 turbo, Bigger Remap, Fat Clutch,Full Stainless, S4 Brakes, 5m mspacers - front, 10mm spacers rear, MFSW.

  27. #26
    dale86's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Oct 2012
    Posts
    355
    Well I made the cuts and it's in havn t fit the climate unit yet or fitted stereo to see if my cuts will be hidden I'm crossing my fingers. The gap that's mentioned doesn't bother me as I never place anything on their anyway.

  28. #27
    5th Gear

    Status
    Offline
    Join Date
    Feb 2012
    Location
    Pie eating land
    Posts
    1,341

    My Social Networking

    Follow ruffrida On Twitter Visit ruffrida's Youtube Channel
    Done mine tonight,nearly let out a little wee as I was trimming the centre console and climate control. Gone back in sweet. Shame me leads ain't come yet,gutted. Knew I should of checked ne parcel before cracking on. Oh well done now. Will post some pics on me thread once the hu is in
    B6 1.9tdi Quattro Avant Sport:
    My Build Thread = http://www.audi-sport.net/vb/a4-a4-c...so-begins.html

    Coming soon: -35mm Springs, Colour coded FOG grills, Trip stalk upgrade.
    Wish List; FMIC, BV43 turbo, Bigger Remap, Fat Clutch,Full Stainless, S4 Brakes, 5m mspacers - front, 10mm spacers rear, MFSW.

  29. #28
    dale86's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Oct 2012
    Posts
    355
    Can anyone help me with where I can take a permanent 12v supply from as I need one to get my RNSd out of safe mode so it holds the code any help would be appreciated .

  30. #29
    5th Gear

    Status
    Offline
    Join Date
    Feb 2012
    Location
    Pie eating land
    Posts
    1,341

    My Social Networking

    Follow ruffrida On Twitter Visit ruffrida's Youtube Channel
    Quote Originally Posted by dale86 View Post
    Can anyone help me with where I can take a permanent 12v supply from as I need one to get my RNSd out of safe mode so it holds the code any help would be appreciated .
    Is the cig lighter not 12v???

    If not you should have a permanent live in your stereo wires, usualy a thick-ish red wire
    B6 1.9tdi Quattro Avant Sport:
    My Build Thread = http://www.audi-sport.net/vb/a4-a4-c...so-begins.html

    Coming soon: -35mm Springs, Colour coded FOG grills, Trip stalk upgrade.
    Wish List; FMIC, BV43 turbo, Bigger Remap, Fat Clutch,Full Stainless, S4 Brakes, 5m mspacers - front, 10mm spacers rear, MFSW.

  31. #30
    dale86's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Oct 2012
    Posts
    355
    I thought about the cigarette lighter as it works when the ignition is off so must have a permanent live . Does the stereo have a permanent live it must do as my after market head unit would not turn off unless I did it after the ignition was off.

  32. #31
    5th Gear

    Status
    Offline
    Join Date
    Feb 2012
    Location
    Pie eating land
    Posts
    1,341

    My Social Networking

    Follow ruffrida On Twitter Visit ruffrida's Youtube Channel
    Either will work,if ya stereo does not have the wire diagram on it. Then ya need a test meter to find out which it is,like I said though I'm pretty much certain it's the red 1
    B6 1.9tdi Quattro Avant Sport:
    My Build Thread = http://www.audi-sport.net/vb/a4-a4-c...so-begins.html

    Coming soon: -35mm Springs, Colour coded FOG grills, Trip stalk upgrade.
    Wish List; FMIC, BV43 turbo, Bigger Remap, Fat Clutch,Full Stainless, S4 Brakes, 5m mspacers - front, 10mm spacers rear, MFSW.

  33. #32
    5th Gear

    Status
    Offline
    Join Date
    Feb 2012
    Location
    Pie eating land
    Posts
    1,341

    My Social Networking

    Follow ruffrida On Twitter Visit ruffrida's Youtube Channel
    Forgot I had taken this,this is the bit you need to cut out to make it fit the double din cage

    This is the rough job before I filed it all straight and square,you can't see a thing once fitted.
    The trimming of the climate is a lot easy than people think,when you turn it over there are2 lines/grooves,if you trim it of just behind them,the climate slids straight back in,no problem.
    Last edited by ruffrida; 27th April 2014 at 00:00.
    B6 1.9tdi Quattro Avant Sport:
    My Build Thread = http://www.audi-sport.net/vb/a4-a4-c...so-begins.html

    Coming soon: -35mm Springs, Colour coded FOG grills, Trip stalk upgrade.
    Wish List; FMIC, BV43 turbo, Bigger Remap, Fat Clutch,Full Stainless, S4 Brakes, 5m mspacers - front, 10mm spacers rear, MFSW.

  34. #33
    dale86's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Oct 2012
    Posts
    355
    I've cut my climate today and for some reason it won clip in its just sits in sloppys mad slides forward as quick as I put it in it slides back out. Does anyone know if the b7 double Din climate is the same as I may just buy a proper one as I'm not to pleased with how mine turned out. My rnsd is been tempremental also as it says no CD changer connected when it is and has power as it's light up hmmmmm .

  35. #34
    mattyboyc's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Sep 2009
    Posts
    1,222
    The double din unit has some location tabs on the top that the single din doesn't so i guess that is why it won't fit properly, ( i went aftermarket so didn't have this problem ) the B7 unit is different in so i believe you need to do the heated rear screen mod as i believe the wiring is different, so i would look for a double din unit from a B6, as for the cd changer you may have to tell the ecu via vag com that you have a cd changer connected to the Rnsd as i suspect if you did a scan it would bring up a fault saying something along the lines of stereo not found, this was the case when someone i know fitted a RNSE from a different car and his changer would not work but once coded all was good.
    A4 AVANT 1.9TDI 130 SPORT:
    18" RS6'S//TWIN EXHAUST//ALLARD EGR DELETE//AERO WIPERS//B7 KEYS & ENGINE COVERS//BLACK OPTICS //FRONT & REAR S-LINE BUMPERS//TAILGATE SPOILER//S4 HEADLIGHTS,GRILLS & DOOR BLADES//RS4 RARB & PEDALS//FRONT,REAR & FOOTWELL AMBIENT LIGHTING//PUDDLE LIGHTS//FAN JETS//MEDIA SYSTEM//T.V//7" HEADREST MONITORS//REAR BLINDS//REVERSE CAMERA// CRUISE & DIS


  36. #35
    Neutral

    Status
    Offline
    Join Date
    Mar 2014
    Posts
    39
    hi everyone

    have you looked at another option making your single din cage into a double din cage you lose the cup holders and have to move the
    hazard switch but I working on mine at the moment was a double din and hated the hazard switch where it was, so made the double din a single din then out came the cup holders cut up and removed the aluminium bracket that holds the switches in place and then removed the sunglass's holder

    At the moment I'am cutting a Perspex stencil to go around a double din kenwood navigation and you can get the cup holder for the arm rest (about £36 from audi) so the hardest job is the rewiring of the switches I've put these next to the roof switch and ciggy lighter on my 05 cab

  37. #36
    dale86's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Oct 2012
    Posts
    355
    Will a climate control unit wit heated seat switches work on a car that doesn't have heated seats ??????

  38. #37
    quattrojames's Avatar
    Moderator

    Status
    Offline
    Join Date
    Mar 2008
    Location
    Dorset
    Posts
    13,856

    My Social Networking

    Follow quattrojames On Twitter Add quattrojames on Facebook
    Quote Originally Posted by dale86 View Post
    Will a climate control unit wit heated seat switches work on a car that doesn't have heated seats ??????
    Yes.
    Ingolstance Read about my A6 HERE.

  39. #38
    quattrojames's Avatar
    Moderator

    Status
    Offline
    Join Date
    Mar 2008
    Location
    Dorset
    Posts
    13,856

    My Social Networking

    Follow quattrojames On Twitter Add quattrojames on Facebook
    Quote Originally Posted by dale86 View Post
    My rnsd is been tempremental also as it says no CD changer connected when it is and has power as it's light up hmmmmm .
    When I tested it, I made sure it lit the CD changer up, but I can't remember if I actually tested to see if it played CD's, it was such a faff trying to change the language I can't remember. Have you coded the RNSd in with VCDS? I would hope that's all it is.
    Ingolstance Read about my A6 HERE.

  40. #39
    dale86's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Oct 2012
    Posts
    355
    Could it be a coding issue as to why I only have rear speakers working too ???

  41. #40
    5th Gear

    Status
    Offline
    Join Date
    Feb 2012
    Location
    Pie eating land
    Posts
    1,341

    My Social Networking

    Follow ruffrida On Twitter Visit ruffrida's Youtube Channel
    Mine went in no problem,but my cage is from a b6
    B6 1.9tdi Quattro Avant Sport:
    My Build Thread = http://www.audi-sport.net/vb/a4-a4-c...so-begins.html

    Coming soon: -35mm Springs, Colour coded FOG grills, Trip stalk upgrade.
    Wish List; FMIC, BV43 turbo, Bigger Remap, Fat Clutch,Full Stainless, S4 Brakes, 5m mspacers - front, 10mm spacers rear, MFSW.

 

 
Page 1 of 2 12 LastLast

Similar Threads

  1. Anyone want a double din cage?
    By Nickynibbles in forum A4/A4 cabriolet/S4 forum(B6 chassis)
    Replies: 17
    Last Post: 23rd November 2011, 12:17
  2. Will 09 8p double din cage fit my 06?
    By asasprey in forum A3/S3/Sportback (8P Chassis)
    Replies: 4
    Last Post: 16th March 2011, 12:19
  3. double din cage & bits
    By khalil in forum Parts Requests
    Replies: 6
    Last Post: 21st May 2009, 15:07
  4. double din cage
    By tom-craig@hotmail.co.uk in forum A3/S3/Sportback (8P Chassis)
    Replies: 16
    Last Post: 5th April 2009, 08:49
  5. OEM Satnav - Need double DIN cage or part number for it...
    By imported_Stewart in forum A3/S3 Forum (8L Chassis)
    Replies: 2
    Last Post: 16th November 2005, 08:11

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO