marco-polo
Registered User
Hi all,
Newby post on this forum - Just sourced myself an 1.9TDi SE avant a little while back and swore blind I was going to keep it 'standard'. Two months on and things are changing as per the norm, wheels have arrived, coilovers on order and the interior is switched out for a leather S4 number.... It's still somewhere near standard in my mind!...
Any how, my issue is this - Just before switching the interior the windows worked fine with just the odd moment where it may take two or three attempts at getting the one touch working. Now I've switched the interior over the windows no longer work and neither does the central locking - the drivers door has to be locked with the key.....
The interior I've put in has extra puddle lights on all four door cards compaired to the original interior, so i'm assuming the modules need re-programing via vagcom to recognise the new lights. Am I right in thinking this? and would this effect the locking as well as the windows?
I've hooked it up and run a full fault check but nothing came up other than the coolant temp sensor which I changed, cleared the code and ran another check - but nothing....
Will I need to change the door modules for one which has the puddle light prgram or maybe just ditch the lights and put the old door looms in which dont have these on?
Can anyone shed any light on the way forward or give me any clue as to what codes to try with vagcom to rectify.
Cheers in advance
Marc
Newby post on this forum - Just sourced myself an 1.9TDi SE avant a little while back and swore blind I was going to keep it 'standard'. Two months on and things are changing as per the norm, wheels have arrived, coilovers on order and the interior is switched out for a leather S4 number.... It's still somewhere near standard in my mind!...
Any how, my issue is this - Just before switching the interior the windows worked fine with just the odd moment where it may take two or three attempts at getting the one touch working. Now I've switched the interior over the windows no longer work and neither does the central locking - the drivers door has to be locked with the key.....
The interior I've put in has extra puddle lights on all four door cards compaired to the original interior, so i'm assuming the modules need re-programing via vagcom to recognise the new lights. Am I right in thinking this? and would this effect the locking as well as the windows?
I've hooked it up and run a full fault check but nothing came up other than the coolant temp sensor which I changed, cleared the code and ran another check - but nothing....
Will I need to change the door modules for one which has the puddle light prgram or maybe just ditch the lights and put the old door looms in which dont have these on?
Can anyone shed any light on the way forward or give me any clue as to what codes to try with vagcom to rectify.
Cheers in advance
Marc