Cleaning MAF sensor on 1.9TDI

N11KDJ

Registered User
Joined
Aug 18, 2004
Messages
132
Reaction score
28
Points
28
Is there a guide on how to clean the MAF sensor somewhere ? I've had a look but can't see anything, I've got some electrical contact cleaner today, do I need to remove the whole thing or just take the sensor out if the plastic tubing & clean that on its own?

Any help much appreciated..
 
Pull off air duct that channels air to filter housing.
Unplug MAF sensor using small flathead screwdriver.
Using a torx bit with indent (hollow end) undo 2 screws holding MAF in place.
Remove MAF and give it a good spraying with the contact cleaner until clean.
replace, refit screws, plug, duct.
:footy:
 
Cheers for that, I took the whole maf housing off and sprayed thoroughly inside , hopefully that'll have cleaned it ok, I think I've found the problem now anyway, boost pipe not connected properly.
 
  • Like
Reactions: m4tty and audilad9

Similar threads

Replies
3
Views
939
Replies
14
Views
15K
Replies
3
Views
1K
Replies
8
Views
4K