Just fitted new stalks/steering wheel now fault codes.....

D

Dan TheMan Welburn

Registered User
Joined
Jun 3, 2012
Messages
464
Reaction score
25
Points
28
Location
Teesside
Hi all finally got round to fitting my 3 spoke leather sline steering wheel, followed the audizine guide for fitting the wheel and airbag and changed wiring plug where i needed too etc, whilst i was on with this i thought i might aswell fit my new cruise and DIS stalks with new highline control module, now ive done all the physical work ie fitting parts and plugging everything in, but as soon as i reconnected my battery and turned on the ignition i now have a flashing brake light on my instruments, also esp light is on and abs light, so ive plugged into vcds, and here are my codes..... (some are unrelated that i know about)

Monday,11,February,2013,20:05:02:32264
VCDS Version: Release 11.11.3
Data version: 20120401

--------------------------------------------------------------------------------
--------------------------------------------------------------------------------

Chassis Type: 8E - Audi A4 B6/B7
Scan: 01 02 03 08 09 0F 11 15 16 17 18 36 37 45 46 55 56 57 65 67
69 75 76 77

VIN: WAUZZZ8E13A123951 Mileage: 166030km/103166miles
-------------------------------------------------------------------------------
Address 01: Engine Labels: 038-906-019-AVF.lbl
Part No: 038 906 019 JQ
Component: 1,9l R4 EDC 0000SG 1570
Coding: 00002
Shop #: WSC 63351
VCID: 6FE7CD652D862D1
WAUZZZ8E13A123951 AUZ6Z0B0164657
No fault code found.
Readiness: 0 0 X X X
-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 8E0-614-517.lbl
Part No: 8E0 614 517
Component: ABS/ESP front 1726
Coding: 00000
Shop #: WSC 00000
VCID: E5CB2F4D7F7A671
2 Faults Found:
01044 - Control Module Incorrectly Coded
35-00 - -
00778 - Steering Angle Sensor (G85)
66-10 - Not Matched - Intermittent
-------------------------------------------------------------------------------
Address 08: Auto HVAC Labels: 8E0-820-043.lbl
Part No: 8E0 820 043 H
Component: A4 Klimaautomat 1016
Coding: 00000
Shop #: WSC 63351
VCID: 2649E841C2FC2C9
2 Faults Found:
00819 - High Pressure Sensor (G65)
07-10 - Signal too Low - Intermittent
01317 - Control Module in Instrument Cluster (J285)
79-00 - Please Check Fault Codes
-------------------------------------------------------------------------------
Address 09: Cent. Elect. Labels: 8E0-907-279-8E2.lbl
Part No: 8E0 907 279 C
Component: int. Lastmodul RDW 0203
Coding: 00001
Shop #: WSC 63351
VCID: 32610411FE34409
1 Fault Found:
00532 - Supply Voltage B+
53-10 - Supply Voltage Too Low - Intermittent
-------------------------------------------------------------------------------
Address 15: Airbags Labels: 8E0-959-655-84.lbl
Part No: 8E0 959 655 B
Component: Airbag 8.4EP 2000
Coding: 0010602
Shop #: WSC 63351 000 00000
VCID: 36693801425C5C9
1 Fault Found:
00655 - Seat Belt Tensioner Igniter; Passenger Side (N154)
001 - Upper Limit Exceeded - MIL ON
-------------------------------------------------------------------------------
Address 16: Steering wheel Labels: 8E0-953-549.lbl
Part No: 8E0 953 549 Q
Component: Lenksáulenmodul 0601
Coding: 01042
Shop #: WSC 06325
VCID: 41835BDD4B92EB1
5 Faults Found:
01330 - Central Control Module for Central Convenience (J393)
49-10 - No Communications - Intermittent
01333 - Door Control Module; Rear Left (J388)
49-10 - No Communications - Intermittent
00532 - Supply Voltage B+
53-10 - Supply Voltage Too Low - Intermittent
01331 - Door Control Module; Driver Side (J386)
49-10 - No Communications - Intermittent
01794 - Control Module - Incorrect Chassis (VIN) Number
35-00 - -
-------------------------------------------------------------------------------
Address 17: Instruments Labels: 8E0-920-9xx-8E2.lbl
Part No: 8E0 920 950 J
Component: KOMBI+WEGFAHRS. RB4 D35
Coding: 00400
Shop #: WSC 10001
VCID: 30650E19F038729
WAUZZZ8E13A123951 AUZ6Z0B0164657
2 Faults Found:
00779 - Outside Air Temp Sensor (G17)
30-00 - Open or Short to Plus
01331 - Door Control Module; Driver Side (J386)
49-10 - No Communications - Intermittent
-------------------------------------------------------------------------------
Address 45: Inter. Monitor Labels: 8E0-951-177.lbl
Part No: 8E0 951 177
Component: Innenraumueberw. 0604
Coding: 00001
Shop #: WSC 00000
VCID: EBDF5975999E511
1 Fault Found:
01463 - Alarm triggered by Sensor for anti-theft alarm System
43-00 - Closed
-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 8E0-959-433-MIN.lbl
Part No: 8E0 959 433 BD
Component: Komfortgerát TBF 1110
Coding: 06859
Shop #: WSC 63351
VCID: 74EDC20944A00E9
Subsystem 1 - Part No: 8E2959802B
Component: Tõrsteuer.FS BRM 0002
Subsystem 2 - Part No: 8E2959801B
Component: Tõrsteuer.BF BRM 0002
9 Faults Found:
01331 - Door Control Module; Driver Side (J386)
49-10 - No Communications - Intermittent
01370 - Alarm triggered by Interior Monitoring
35-00 - -
01561 - Left Rear Door
59-10 - Can't Unlock - Intermittent
01561 - Left Rear Door
61-00 - Won't De-Safe
01562 - Right Rear Door
59-10 - Can't Unlock - Intermittent
01562 - Right Rear Door
61-00 - Won't De-Safe
01801 - Door Warning Lamp; Drivers Side (W30)
57-10 - Electric Circuit Failure - Intermittent
01811 - Supply Voltage for Door Controller; Drivers Side (J386)
37-10 - Faulty - Intermittent
01802 - Door Warning Lamp; Pass Side (W36)
57-10 - Electric Circuit Failure - Intermittent
-------------------------------------------------------------------------------
Address 56: Radio Labels: 8E0-035-1xx-56.lbl
Part No: 8E0 035 186 L
Component: concert II GRO 0001
Coding: 01001
Shop #: WSC 63351
VCID: 30650E19F038729
2 Faults Found:
00852 - Loudspeaker(s); Front
36-00 - Open Circuit
00858 - Connection; Radio ZF Output to Antenna Amplifier
36-00 - Open Circuit
End ---------------------------------------------------------------------


So ignore the ones related to rear doors and door electrics as that is a work in progress, but the ones im worried about are the ones related to the control module incorrect vin etc etc.....

Any thoughts?
 
look on the wiki it will guide you through
 
cheers guys got the lights out now im just coding the dis/cruise, only thing im stuck with is the instrument adaptation im unsure what options to select? does it matter?
 
yes it does matter

I think you will want 31000 theres only one way to find out lol
 
Well i got working DIS and cruise, my new steering wheel is one notch off but ill soon adjust that, only thing is i must of input an incorrect figure when coding, as i took the car for a quick drive, and the esp kicked in 3 times just cruising along no ice, nothing, just short pulses of what felt like the abs kicking back. After the third the light came on and stayed on,

Dont know if any of my car details will help but its a 2002 se tdi awx 5 speed, had no extras from factory, i put the 'Q' scsm in and also the matching slipring,

Oh and i dont think i selected 31000, my car was 30100 as standard
 
I think you would have needed a highline steering module to have 30100
 
Dan's definitely got the highline module (i know his dealer:thumbsup:)

Dan there should be a code for the abs brakes - did you scan before you changed modules - what code was in before?

if not use the 'flyer' on VCDS to guide you - it should be something like 004455 (that's mine 312 discs / abs etc) - it's a soft code so you've lost the 'original' but you'll have it on the scan / can work it out.

cheers
And
 
I didnt scan before changing it over mate, i used the calculator which was linked from one of the other forums, i took a 3 digit code from the sticker in spare wheel well, ill have to have a proper look tomorrow, mine only has small brakes, car apparently originally came with 15" wheels, was a basic SE,

the calculator i looked at referred to this off rosstech

0?xxx: Chassis
  • 9 = Audi A4
0x?xx: Brakes
  • 2 = Brembo 17" (PR-1LJ)
  • 3 = FN3 16" (PR-1LT/1LF)
  • 4 = HP2 16" (PR-1LX)
  • 4 = FNR 16" (PR-1LA/1LG)
  • 5 = FN3 15" (PR-1LB/1LE)
  • 6 = C54 (PR-1LZ)
0xx?x: Engine
  • 5 = 4/6 Cyl. Diesel
  • 7 = 4/5 Cyl. Gasoline
  • 9 = 6/8 Cyl. Gasoline
0xxx?: Transmission
  • 5 = Manual
  • 7 = Automatic (5HP19, 5HP24, AG4, AG5)
  • 9 = Multitronic (01J, CVT)
To which i think i missed the 9 for chassis i think i left that as 0 so that might be my mistake ill recode it in the morning,

Im guessing my code should be 09555?
 
I know he has the highline module now but he is saying he had 30100 on the old module which was not highline yet that code is for higline modules according to the guide I linked to above

09555 sounds right to me it sounds like you have the same as me mine had 15 inch wheels from stock
 
yep when you run the ABS coding module it'll bring up the 'flyout' with the codes on it.

yours will be something like 04575

although ross-tech would tell you it's 09555 - my ABS code was always 04xxx.

"stu-m" sorry i was only joking as i supplied the module!

And
 
audi upgrades
Could this simple mistake cause my ESP issue?

Ill get on with re-coding it in the morning and update once i have done it and take it for another test
 
From what i can gather on this web link Audi A4 (8E) Brake Electronics (Bosch 5.7) - Ross-Tech Wiki

My login code is 09555 and my coding code is 04255

Ill try to recode with these numbers in the morning and hopefully this will correct my ESP issue, but overall im happy with the job the new wheel looks the BIZ, shame i snapped one of the shroud screws, so the wheel rubs slightly, on my test drive i tested cruise, functioned well, and my DIS i think i activated more functions than i needed (as i guessed the code really)

Will update the thread tomorrow,

thanks for the help guys
 
right so i now have the abs/esp coded correctly, no lights or faults,

my only issues now are my steering wheel is constantly showing:
01044 - Control Module Incorrectly Coded,

which i am confused about as i have selected the correct code for my wheel

Coding
  • 0?xxx: Steering Wheel
    • 0 = Standard (without Multifunction)
    • 1 = 3-Spoke Steering Wheel (Sport Steering Wheel)
    • 2 = Multifunction Steering Wheel with Radio Control
    • 3 = Multifunction Steering Wheel with Radio/Telephone Control
    • 4 = Multifunction Steering Wheel with Radio/Telephone/Voice Control
    • 5 = Multifunction Steering Wheel with Radio/Voice Control
  • 0x?xx: Options
    • +1 = Tiptronic
  • 0xx?x: Board Computer & Cruise Control
    • 0 = Board Computer & Cruise Control not installed
    • 1 = Board Computer installed
    • 2 = Cruise Control installed
    • 4 = Board Computer & Cruise Control installed
  • 0xxx?: Rear Wiper (Chassis)
    • 1 = Rear Wiper not installed (Sedan/Cabriolet)
    • 2 = Rear Wiper installed (Avant)
My wheel is not a standard wheel, and is 3 spoke (not MFSW) so surely my code of 01041 should be correct? i have then gone into adaptation and opened block 081, and entered 00111 so that the module can learn the vin etc, but still get this fault,

that and the fact my horn doesnt function at all :S


Starting to wonder if it is because i have fitted an a3 steering wheel ( well i assume its an a3 one as part number starts 8p0)
 
Last edited:
Dan

My 3 spoke wheel was coded 00002 originally - but it now works with either the 01042 or 00042 (avant) code - i think the wheel is 'dumb' unless it's multi-function- there's no airbag faults and the horn works.

If you've a multi-meter check the horn pins 'short' when pressed.

By the way why did you change the slip ring? is it a b6 or b7 one?

Is it possible the A3 horn wiring is different?

Oh and have you cleared the fault codes and driven it for a bit?

And
 
Ive cleared the codes mate but it comes back with control module incorrectly coded, and yeah i changed the slipring for a b7 one, so all plugs line up and fit right, i changed the 4 pin plug for the airbag (i read all the warnings about single stage dual stage etc) so you reckon it might be worth coding it to think its multi-function? i dont own a multi meter mate,

Only driving ive done is the school run this morning... about 15 miles no difference to horn

This is the wheel i fitted:
AUDI A3 S3 A4 S4 A5 S5 A6 S6 A8 Q5 Q7 TT S-LINE STEERING WHEEL with airbag | eBay
 
The airbag wiring harness i got might be slightly different, ill take it back out and cross reference the pin locations on that diagram to the one i have and HOPEFULLY it will be something obvious :)
 
dan

have you checked the fuse? (horn one)

did you do the whole re-calib sequence when you did your abs as the wicki guide - there's a thread about a guy who had this prob on a rs6 - think it might be similar

Strange fault code, 01044

And
 
Well i still have that fault code, BUT.... i got my horn working, so that was unrelated, the multi plug was layed out differently to the one in the guide pics, for some reason my horn pins were on the upper row on their own, there were two blanks on the lower so swapped them into them and viola! horn working as it should, all the info on that link seems to point to recoding abs module, but i dont have any lights or anything so im not sure how that could be at fault.....however as id prefer no faults i will attempt recoding it as it may be because ive recoded instruments/steering wheel afterwards,
 
SCCM and ABS are related i just don't know how!:keule:

i'd try and follow the steering calib / module / abs sequence again

nearly there now:icon_thumright:
 
You must log in or register to reply here.

Similar threads

J
Just fitted my new wheels.
Replies
21
Views
3K
scottshere
scottshere
D
New Steering Wheel.
Replies
6
Views
780
Digger1
D
VagCabby
B7 DTM steering wheel fitted
Replies
7
Views
2K
VagCabby
VagCabby
F
Just Fitted Nav+ & DVD Changer
Replies
13
Views
1K
The911SC
The911SC
B
Fault codes
Replies
7
Views
939
Biddy
B
Top
Back