Parking sensors

[Harribo66]

I have looked at the DIY section and read the guide,

this one;
http://www.audi-sport.net/vb/a4-a4-...g-sensors-driveway-retro-fit.html#post1509011

I would like to know which cobra set to purchase and what size hole saw bit.

is there another guide anywhere else?

cheers.

J

 

[simon.m]

just buy some good after market ones they will come with the drill bit

 

[Harribo66]

Can you recommend any mate?

 

[simon.m]

no mate there is loads on ebay thou

 

[phil_w]

There's a newer flush-fit kit here:

Cobra Partkmaster A0358 Factory Look Flush Mount Rear Parking Sensors | eBay

 

[A7788]

I bought and fitted these, CAR REVERSING REVERSE PARKING 4 SENSOR KIT BUZZER ALARM | eBay however the one's Phil_w posted looks good. Get what you pay for I guess

 

[Harribo66]

There's a newer flush-fit kit here:

Cobra Partkmaster A0358 Factory Look Flush Mount Rear Parking Sensors | eBay

these look good, i wonder if they are any harder to fit.

 

[Mike.M]

I went for the cobra 0258 as they are really thin sensors on the bumper face. I did look into the flush ones but the hole would have to be really accurate and clean which would not have been the case with the kit I fitted and at least it gave me a little play and covered any inaccuracies.

 

[a6_chris]

Jonny (jb0o) on the forum sells Cobra via his eBay business site http://www.ebay.co.uk/itm/221143570111?redirect=mobile

 

[scott b]

the cobra are the same kit as factory spec near enough

 

[Mike.M]

As above.... the audi kit is the cobra 0158

 

[Harribo66]

There's a newer flush-fit kit here:

Cobra Partkmaster A0358 Factory Look Flush Mount Rear Parking Sensors | eBay

Just purchaced these. Ill update you all once i have everything and i will upload a 'how to' thread, (if all goes well)

Josh

 

[phil_w]

Yep - I'm saving up for Jonny to do mine up north on our B7 Avant ...