Would 5x110 offset alloys fit a b6?

[allyp]

sorry more stupid questions do you reckon 5x110 alloys with et43 would fit the audi thanks

 

[Broken Byzan]

not without wobble bolts and appropriate spigot rings.

 

[allyp]

Ok so its possible then with the bolts and rings then?thanks

 

[quattrojames]

5 x 112 wheels with the correct offset really aren't that rare! I'm not sure why you're trying to fit such abnormal wheels!

 

[allyp]

Lol,just want to see my options before i spend a big wad of money thats al.....l maybe something different as well

 

[CMD]

Our A4 b6's have the following 5x112 stud, 57.1 center bore , Offset 43-35. Stick within these guidelines and you should be fine.

 

[Nutkin]

Wobble bolts are your friends , I'm assuming astra wheels?

 

[allyp]

Well was thinking vectra c ones ,but might still go for the s4 17s presumably they fit straight on

 

[paul20v]

S4 17s will fit straight on
i would like to see a set of 10mm hubcentric spacers on the rear at least for a bit more stance thou.

 

[allyp]

Sounds good ,expand on the hubcentric bit as youve lost me lol

 

[matttrs]

hubcentric sit on the flange of the hub, making sure they are perfectly centred, they again have a hubcentric lip for your wheels to sit on, so everything sits in the middle of the circle.
On older spacers for old dubs and other cars, you'd often get wheel wobble from wheels not sitting perfectly central

 

[CMD]

All spacer's should have hub centric fittment. In a nut shell it's the center of the wheel (hole) sit's on a lip which is 57.1. examples below

NOT HUB CENTRIC.
Grayston Universal 4 Hole Wheel Spacer 10mm on eBay (end time 16-Feb-11 20:39:13 GMT)

HUB CENTRIC
10mm wheel spacer kit Golf Mk3/4/5 A3 S3 A4 S4 RS4 NEW on eBay (end time 17-Feb-11 11:19:59 GMT)

If the spacer's are NOT hub centric you will suffer wheel wobble.

 

[allyp]

Ok thanks matt,maybe would look nice with the back wider mmmm