Well for a start you will need to get 120 to 112 PCD wheels adaptors, FK used to do them but think they have discontinued, BMW to VAG adapters are not as common as some so not as readly available? If I recall I believe the only people doing them now is H&R they are a bit more expensive though?
try here H&R PCD Adapters at Venom Motorsport
Can be done as said but the Hub adapters are quite pricey. I know of a company that do them for £190ish...any PCD you want and they'll machine them up!
Nothing wrong with that! think a lot of us do that daily.ha
I was condidering the Hub adapters for mine because the Rs runs an ET20 and there aint alot Et20 'Nice' alloys about but can get some real nice alloys with the samePCD as the BM. I had a quote from the guy for 15mm Hub space adapters with the 5x120 pcd in them also. A lot will yawn about them not being suitable, bearing wear etc etc but its down to your own choice. I know of 2 guys who have run PCD 12/15mm adapters exactly like these (not just Hubcentric spacers) for over 2 yrs now and they havnt had any issues. So with these you get the best of both worlds - 15mm hubcentrics with the 2 diff pcds! Widens your choice of alloy...
only problem with bmw wheels is the ET it tends to be much lower! then adapters on top which are at least 15mm the wheels will then poke too much this applys to most but not all bmw wheels. you would probably get away with them on the rs models tho
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.