Chris NottVolks Autos
Page 4 of 9 FirstFirst 123456789 LastLast
Results 121 to 160 of 351
Like Tree4Likes

Thread: Retrofit Rear Parking Sensors?

  1. #121
    NHN
    NHN's Avatar
    Modmetractor

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Coding Something
    Posts
    27,121
    Cant be rsed for Ł6, you get a ****ty piece of dough with just handfuls of crap on top, I prefer a proper pizza, I'm lucky to have a pizzeria here that actually does an outstandingly good what I would call proper italian pizza, the quattro stagiani is well all I can say is bliss, lol, to many non italians trying to become a Dominos which tbh are quite literally puke food

    OEM RETROFITS - CRUISE CONTROL - SAT NAV - BLUETOOTH - AMI - HEADLIGHT SYSTEMS

    PARKING SYSTEMS - DIAGNOSTICS - FAULT FINDING - BODYWORK - PAINTWORK

  2. # ADS
    ADS
    Join Date
    Always
    Location
    Global
    Posts
    Many
     
  3. #122
    NHN
    NHN's Avatar
    Modmetractor

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Coding Something
    Posts
    27,121
    Did you install the data DVD's aswell not just the setup install of elsa, if the data dvd's arent installed then you'll get nowhere fast, try reinstalling the main setup aswell as this can cause issues like these, try to install with & without admin rights if one way doenst work, I didnt even use compatibility mode either.

    OEM RETROFITS - CRUISE CONTROL - SAT NAV - BLUETOOTH - AMI - HEADLIGHT SYSTEMS

    PARKING SYSTEMS - DIAGNOSTICS - FAULT FINDING - BODYWORK - PAINTWORK

  4. #123
    Khufu's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2003
    Location
    West coast of Scotland
    Posts
    5,693
    Quote Originally Posted by ryanstewart9 View Post
    Ha Ha got Etka running fine thanks.

    With regards to Elsa, ran admin program first, I created a new user, log in with the new user details, get the big message come up, scroll down and click ok at the bottom, then I get all these messages come up one by one:

    Failed to load "InfoPASS"
    Failed to load "InfoSNK"
    Failed to load "InfoHS2"
    Failed to Load "InfoWT"
    Failed to load "InfoSLP"
    Failed to load "InfoWWW"
    Failed to load "InfoAU"
    Failed to load "InfoRL"
    Failed to load "InfoKi2"
    Failed to load "InfoIGG"
    Failed to load "InfoSAZ"

    Then I try to load up Workshop manual and it brings up a message:

    Failed to create empty folder.

    Then the program wont open. Checked in properties under Compatability and it says Windows XP (Service Pack 2).

    Very confused....
    That sounds grim. TBH, sounds like if not a vista issue, that the installation is corrupt. I "bought" a copy years ago and guy swore was fine for audi - I could only get VW to work. Claimed it was my fault for not installing it right but I tried EVERYTHING and TBH in these matters i'm not that stupid!
    2003-2008 1998 Red A3 8L 1.8 Sport
    2008 -> 2003 Akoya Silver A3 8P1 2.0 FSi Sport

  5. #124
    NHN
    NHN's Avatar
    Modmetractor

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Coding Something
    Posts
    27,121
    I concur even if K is scottish.............................lmfao

    OEM RETROFITS - CRUISE CONTROL - SAT NAV - BLUETOOTH - AMI - HEADLIGHT SYSTEMS

    PARKING SYSTEMS - DIAGNOSTICS - FAULT FINDING - BODYWORK - PAINTWORK

  6. #125
    ryanstewart9's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Sep 2009
    Location
    Surrey/Hants/Berks
    Posts
    448
    Ok I seem to have got it working, I'm not sure how but I'm not complaining

    It is running Elsa 3.50, the guy told me once you know you are running compatiable with XP SP2, right click Elsa, click on Run as Adimistrator.

    I'm guessing I'll just have to run it this way in order to get it to work..

    I know what you mean by American style pizzas Nigel. Much prefer a proper thin crust italian pizza with real ingredients
    "If you ain't first, you're last!" - Ricky Bobby

    2008 A3 S-line 2.0 TDI PD140 (Pre-facelift)

  7. #126
    Khufu's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2003
    Location
    West coast of Scotland
    Posts
    5,693
    result! have fun learning new things LOL
    2003-2008 1998 Red A3 8L 1.8 Sport
    2008 -> 2003 Akoya Silver A3 8P1 2.0 FSi Sport

  8. #127
    NHN
    NHN's Avatar
    Modmetractor

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Coding Something
    Posts
    27,121
    Ryan, come on, tell me you forgot to install the data dvd's lol, I did this myself tbh when I 1st installed it, so far from perfect for sure, afterall supposedly human, but glad all working, now you will see your bank balance go down quicker than a mexican whores knickers, if she wears any, lol

    OEM RETROFITS - CRUISE CONTROL - SAT NAV - BLUETOOTH - AMI - HEADLIGHT SYSTEMS

    PARKING SYSTEMS - DIAGNOSTICS - FAULT FINDING - BODYWORK - PAINTWORK

  9. #128
    ryanstewart9's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Sep 2009
    Location
    Surrey/Hants/Berks
    Posts
    448
    No Nigel it was all installed, still unsure as to how I managed to get it to work....one of life's many mysteries
    "If you ain't first, you're last!" - Ricky Bobby

    2008 A3 S-line 2.0 TDI PD140 (Pre-facelift)

  10. #129
    NHN
    NHN's Avatar
    Modmetractor

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Coding Something
    Posts
    27,121
    lol, admission of guilt shows your a man, lol, nah serious note, cool all you need to do now is update it to 3.7, good luck, but it really is the book of books, if I was religious I'd say it was 2nd only to the bible, lol

    OEM RETROFITS - CRUISE CONTROL - SAT NAV - BLUETOOTH - AMI - HEADLIGHT SYSTEMS

    PARKING SYSTEMS - DIAGNOSTICS - FAULT FINDING - BODYWORK - PAINTWORK

  11. #130
    ryanstewart9's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Sep 2009
    Location
    Surrey/Hants/Berks
    Posts
    448
    You must be a little religious married to an Italian....

    I do have a disc with 3.61 and 3.7 on it (no 3.6 though?), but it's from a different source. Would this still be ok to use?
    "If you ain't first, you're last!" - Ricky Bobby

    2008 A3 S-line 2.0 TDI PD140 (Pre-facelift)

  12. #131
    NHN
    NHN's Avatar
    Modmetractor

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Coding Something
    Posts
    27,121
    Marraige, who mentioned marraige & if her mental mother has her ways that will never happen lol, note to self, marry missus to piss of mother outlaw, perfect, thanks ryan, lol

    Well could try 3.61 mate & if it doesnt see a certain update, I think it advises you anyway to advise cant install this update without other.

    OEM RETROFITS - CRUISE CONTROL - SAT NAV - BLUETOOTH - AMI - HEADLIGHT SYSTEMS

    PARKING SYSTEMS - DIAGNOSTICS - FAULT FINDING - BODYWORK - PAINTWORK

  13. #132
    ryanstewart9's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Sep 2009
    Location
    Surrey/Hants/Berks
    Posts
    448
    My wife dont even speak to my parents. Ha Ha....
    "If you ain't first, you're last!" - Ricky Bobby

    2008 A3 S-line 2.0 TDI PD140 (Pre-facelift)

  14. #133
    NHN
    NHN's Avatar
    Modmetractor

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Coding Something
    Posts
    27,121
    TBH mate, she knows how I feel about her, as I told her to her face in her mother tongue with sign language aswell, lol, cant be arsed with this false persona ******, if you dont like someone then just tell them, end of, saves the graces & falseness, who said everyone should get along, at least she'll steer clear of me now which is perfect for me, anyway baby due to august so it will be her loss, not ours as the missus also says, one less problem to deal with, she'll regret it more than we will.

    OEM RETROFITS - CRUISE CONTROL - SAT NAV - BLUETOOTH - AMI - HEADLIGHT SYSTEMS

    PARKING SYSTEMS - DIAGNOSTICS - FAULT FINDING - BODYWORK - PAINTWORK

  15. #134
    ryanstewart9's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Sep 2009
    Location
    Surrey/Hants/Berks
    Posts
    448
    Exactly the same boat mate..

    F*** EM!!

    On a negative note, just installed 3.61 & 3.70 and now Elsa wont show me anything
    Last edited by ryanstewart9; 30th January 2010 at 01:39.
    "If you ain't first, you're last!" - Ricky Bobby

    2008 A3 S-line 2.0 TDI PD140 (Pre-facelift)

  16. #135
    NHN
    NHN's Avatar
    Modmetractor

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Coding Something
    Posts
    27,121
    Urm did you restart after each update or one after another, I always restart after each update installed.

    Yeap my sentments mate, but thing is her father is bloody great guy, lol typical.

    OEM RETROFITS - CRUISE CONTROL - SAT NAV - BLUETOOTH - AMI - HEADLIGHT SYSTEMS

    PARKING SYSTEMS - DIAGNOSTICS - FAULT FINDING - BODYWORK - PAINTWORK

  17. #136
    ryanstewart9's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Sep 2009
    Location
    Surrey/Hants/Berks
    Posts
    448
    Nope, my wife dont speak to either of mine.

    I restarted after installing both & I had to create my user again once rebooted.

    Now when I open workshop manual after inputting vehicle details it just comes up: selection blocked! Please first start the vehicle identification......
    "If you ain't first, you're last!" - Ricky Bobby

    2008 A3 S-line 2.0 TDI PD140 (Pre-facelift)

  18. #137
    Khufu's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2003
    Location
    West coast of Scotland
    Posts
    5,693
    Dont you then have to go into the car icon and put your details in of your car like make, model, engine & gearbox code?
    2003-2008 1998 Red A3 8L 1.8 Sport
    2008 -> 2003 Akoya Silver A3 8P1 2.0 FSi Sport

  19. #138
    NHN
    NHN's Avatar
    Modmetractor

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Coding Something
    Posts
    27,121
    Yes you have to do most of them options before getting the info, but sounds like he's already doing this.

    OEM RETROFITS - CRUISE CONTROL - SAT NAV - BLUETOOTH - AMI - HEADLIGHT SYSTEMS

    PARKING SYSTEMS - DIAGNOSTICS - FAULT FINDING - BODYWORK - PAINTWORK

  20. #139
    Khufu's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2003
    Location
    West coast of Scotland
    Posts
    5,693
    Quote Originally Posted by NHN View Post
    Yes you have to do most of them options before getting the info, but sounds like he's already doing this.
    oops, just re-read it!
    2003-2008 1998 Red A3 8L 1.8 Sport
    2008 -> 2003 Akoya Silver A3 8P1 2.0 FSi Sport

  21. #140
    ryanstewart9's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Sep 2009
    Location
    Surrey/Hants/Berks
    Posts
    448
    Just uninstalled the whole thing & started again.

    Only installed up to 3.50 though as it was working then..
    "If you ain't first, you're last!" - Ricky Bobby

    2008 A3 S-line 2.0 TDI PD140 (Pre-facelift)

  22. #141
    ryanstewart9's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Sep 2009
    Location
    Surrey/Hants/Berks
    Posts
    448
    Ok guys now I've got Elsa working I'm gonna attempt to hook up some of the wiring on my days off next week & feed the positive wires down to the front of the car.

    Firstly is it advisable to disconnect the battery or will I be ok tapping into the canbus with the ignition off?

    On a different note, do you know if the wiring for the heated front seats runs down the side of the car or down the centre console?
    "If you ain't first, you're last!" - Ricky Bobby

    2008 A3 S-line 2.0 TDI PD140 (Pre-facelift)

  23. #142
    ryanstewart9's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Sep 2009
    Location
    Surrey/Hants/Berks
    Posts
    448
    Ok guys I've managed to get the side trim off (although Elsa forgot to tell me about the extra screw behind the C pillar lower!).

    Now I took a pic of the area as I'm unsure as to where to tap into the wiring? Can I just tap into the wiring to the right of the PDC unit for the canbus or do I need to tap into it where that big connector is?

    Thanks for all your help guys..

    (Also not sure what the long red plastic thing is?)

    "If you ain't first, you're last!" - Ricky Bobby

    2008 A3 S-line 2.0 TDI PD140 (Pre-facelift)

  24. #143
    Khufu's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2003
    Location
    West coast of Scotland
    Posts
    5,693
    The red cable is a emergency release for the fuel cap.

    Im assuming that is the bose amp, i dont have that in my car lol. TBH you can tap in anywhere on the wire so I'd just go for somewhere that gives you easy access.

    Sorry I dont know how the wiring is routed for heated seats but I would have thought it would make sense to route same as airbag wiring.
    2003-2008 1998 Red A3 8L 1.8 Sport
    2008 -> 2003 Akoya Silver A3 8P1 2.0 FSi Sport

  25. #144
    ryanstewart9's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Sep 2009
    Location
    Surrey/Hants/Berks
    Posts
    448
    Thanks Khufu,

    As the loom I purchased had all the wiring wrapped together I've had to unwrap the cloth tape to isolate the two power cables so I can retape them and run them to the front of the car.

    At least now I can tap into the canbus, earth the unit and plug in the buzzer
    "If you ain't first, you're last!" - Ricky Bobby

    2008 A3 S-line 2.0 TDI PD140 (Pre-facelift)

  26. #145
    ryanstewart9's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Sep 2009
    Location
    Surrey/Hants/Berks
    Posts
    448
    So I've finally found the wiring diagrams on Elsa and I think I have found the two power points for the PDC.

    Problem is I cant work out which is permanent & which is ignition?

    I believe the fuse positions are:

    Position of relays and fuses, from model year 2007
    Fuses (SC) in fuse holder, driver side dash panel

    SC4 - Fuse 4 on fuse holder C, nominal value 5A, Terminal 15

    E128 - Heated rear left seat switch with regulator ą)
    E129 - Heated rear right seat switch with regulator ą)
    E226 - Tyre pressure monitor button
    E256 - TCS and ESP button
    E284 - Garage door operating unit
    F4 - Reversing light switch ˛)
    G65 - High pressure sender
    G238 - Air quality sensor
    G266 - Oil level and oil temperature sender
    J162 - Heater control unit ą)
    J255 - Climatronic control unit
    J301 - Air conditioning system control unit ą)
    J401 - Navigation system with CD drive control unit ą)
    J446 - Parking aid control unit
    J530 - Garage door operation control unit
    J706 - Seat occupied recognition control unit
    Y7 - Automatic anti-dazzle interior mirror
    Z20 - Left washer jet heater element
    Z21 - Right washer jet heater element

    ą) not for models with US equipment
    ˛) for models with manual gearbox only

    SC14 - Fuse 14 on fuse holder C, nominal value 10A, Terminal 30

    E313-Selector leverł)
    F189-Tiptronic switchą)˛)
    J104-ABS control unit⁴)
    J217-Automatic gearbox control unitą)˛)
    J446-Parking aid control unit

    ą) not for models with US equipment
    ˛) for models with automatic gearbox (09G) only
    ł) for models with direct shift gearbox (02E) only
    ⁴) for models with anti-lock brake system (ABS) MK60 and hydraulic brake servo (HBV) only
    "If you ain't first, you're last!" - Ricky Bobby

    2008 A3 S-line 2.0 TDI PD140 (Pre-facelift)

  27. #146
    NHN
    NHN's Avatar
    Modmetractor

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Coding Something
    Posts
    27,121
    Front or rear heated seats?

    Also you must tap into the CAN on the convenience module so as to use the correct bus as such.

    Fuses 1-11 are ignition switched for the record, but elsa shows you which pin goes to which fuse anyway mate.

    OEM RETROFITS - CRUISE CONTROL - SAT NAV - BLUETOOTH - AMI - HEADLIGHT SYSTEMS

    PARKING SYSTEMS - DIAGNOSTICS - FAULT FINDING - BODYWORK - PAINTWORK

  28. #147
    ryanstewart9's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Sep 2009
    Location
    Surrey/Hants/Berks
    Posts
    448
    Quote Originally Posted by NHN View Post
    Front or rear heated seats?

    Also you must tap into the CAN on the convenience module so as to use the correct bus as such.

    Fuses 1-11 are ignition switched for the record, but elsa shows you which pin goes to which fuse anyway mate.
    Thanks Nigel

    I'm trying to retrofit rear footwell lights aswell, so just wanted to know where the bulk of the wiring went from the seat (side of car or centre console)?

    So Fuse 4 is ignition and fuse 14 is the permanent.

    Is it ok to tape into the cables to the right of the pdc in the picture, as I think the convenience module wiring is in that loom as I can see a orange/green wire & an orange/brown wire?
    "If you ain't first, you're last!" - Ricky Bobby

    2008 A3 S-line 2.0 TDI PD140 (Pre-facelift)

  29. #148
    NHN
    NHN's Avatar
    Modmetractor

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Coding Something
    Posts
    27,121
    Rear footwell lights IMHO, would follow the loom that comes from under the front seats, this goes into the floor via the plastic trim that covers up the seat connections in the floor, then goes across to the sides & along to the pillar then where ever you want from there, wiring goes to the side for ref, oem BT fitted goes across the floor in passenger footwell, reason I mention this is I wouldnt want people always treading on wires, so to the sides.

    Also use some bullet or the like connectors for the rear footwells where the seat connections are, incase you have to remove the seat, cause if the wire is solid all way through to the fusebox or so then you'd have to cut it later, best to do it now.

    Ryan dont be lazy remove the plastic housing that the pdc & conv module sit in & then either tap into the bus wires straight of the conv module or follow those wires to see if they go into the loom you're mentioning.

    OEM RETROFITS - CRUISE CONTROL - SAT NAV - BLUETOOTH - AMI - HEADLIGHT SYSTEMS

    PARKING SYSTEMS - DIAGNOSTICS - FAULT FINDING - BODYWORK - PAINTWORK

  30. #149
    ryanstewart9's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Sep 2009
    Location
    Surrey/Hants/Berks
    Posts
    448
    Ah, Thanks Nigel.

    I wondered what the plug was behind the PDC unit. So I just tap into that plug, run a short cable to the end of the unit to plug into the PDC?
    "If you ain't first, you're last!" - Ricky Bobby

    2008 A3 S-line 2.0 TDI PD140 (Pre-facelift)

  31. #150
    NHN
    NHN's Avatar
    Modmetractor

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Coding Something
    Posts
    27,121
    Yeap, I just tapped into the bus wires coming of the conv plug mate, so short connection really, atm I used scotch locks, but I seriously suggest soldering as I am going round my car & removing the locks & soldering everything.

    OEM RETROFITS - CRUISE CONTROL - SAT NAV - BLUETOOTH - AMI - HEADLIGHT SYSTEMS

    PARKING SYSTEMS - DIAGNOSTICS - FAULT FINDING - BODYWORK - PAINTWORK

  32. #151
    Khufu's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2003
    Location
    West coast of Scotland
    Posts
    5,693
    I soldered mine as I know how crappy scotch locks can be LOL. Ryan, do your 'power' wires have ends on them? When I had car apart I looked at the fuse holders and my PDC has the teminals missing for the fuses used. I'd like to to know what it looks like or even better a repair wire part number so I can do it properly too.
    2003-2008 1998 Red A3 8L 1.8 Sport
    2008 -> 2003 Akoya Silver A3 8P1 2.0 FSi Sport

  33. #152
    Khufu's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2003
    Location
    West coast of Scotland
    Posts
    5,693
    just rememebered you got it from Kufatec & checked pic, seems no ends on the 30 & 15 power wires :-(
    2003-2008 1998 Red A3 8L 1.8 Sport
    2008 -> 2003 Akoya Silver A3 8P1 2.0 FSi Sport

  34. #153
    NHN
    NHN's Avatar
    Modmetractor

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Coding Something
    Posts
    27,121
    Ewan me old china, as I suggested to Ryan, dont be a lazy rse, seeing a pic of the ends are no good as they have varying sizes anyway of the same connector type & wire gauge, just pull finger out of bottom & go through etka, just trace through the looms which is for the pdc & then you can trace the repair wires from there mate, as I had to do!!!

    OEM RETROFITS - CRUISE CONTROL - SAT NAV - BLUETOOTH - AMI - HEADLIGHT SYSTEMS

    PARKING SYSTEMS - DIAGNOSTICS - FAULT FINDING - BODYWORK - PAINTWORK

  35. #154
    ryanstewart9's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Sep 2009
    Location
    Surrey/Hants/Berks
    Posts
    448
    Quote Originally Posted by Khufu View Post
    Ryan, do your 'power' wires have ends on them? When I had car apart I looked at the fuse holders and my PDC has the teminals missing for the fuses used. I'd like to to know what it looks like or even better a repair wire part number so I can do it properly too.
    Hi Khufu, my permanent power has an end on it but the ignition cable is a bare wire. I'm guessing Kufatec expect my permanent live to be an empty slot, whilst my ignition live I will need to tap into.
    "If you ain't first, you're last!" - Ricky Bobby

    2008 A3 S-line 2.0 TDI PD140 (Pre-facelift)

  36. #155
    Khufu's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2003
    Location
    West coast of Scotland
    Posts
    5,693
    Quote Originally Posted by NHN View Post
    Ewan me old china, as I suggested to Ryan, dont be a lazy rse, seeing a pic of the ends are no good as they have varying sizes anyway of the same connector type & wire gauge, just pull finger out of bottom & go through etka, just trace through the looms which is for the pdc & then you can trace the repair wires from there mate, as I had to do!!!
    Ah, just finally found connectors on ETKA! had to scroll off the screen below car types! Seemed to have looked everywhere else for them!!
    2003-2008 1998 Red A3 8L 1.8 Sport
    2008 -> 2003 Akoya Silver A3 8P1 2.0 FSi Sport

  37. #156
    NHN
    NHN's Avatar
    Modmetractor

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Coding Something
    Posts
    27,121
    Ye ye, specsavers lol

    OEM RETROFITS - CRUISE CONTROL - SAT NAV - BLUETOOTH - AMI - HEADLIGHT SYSTEMS

    PARKING SYSTEMS - DIAGNOSTICS - FAULT FINDING - BODYWORK - PAINTWORK

  38. #157
    Khufu's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2003
    Location
    West coast of Scotland
    Posts
    5,693
    Ok the fuse holder repair wire is 000 979 135 for a 1mm wire so will need 2, one for fuse 8 and one for fuse 18

    and for my other cluster project, 32 pin connector at cluster need repair wire 000 979 018 and at the 10 pin fuel delivery unit (petrol) 000 979 131
    It looks like 000 979 025 for the .5mm wire and 000 979 150 for the 1.0mm for the diesel 5 pin connector to the pump
    2003-2008 1998 Red A3 8L 1.8 Sport
    2008 -> 2003 Akoya Silver A3 8P1 2.0 FSi Sport

  39. #158
    NHN
    NHN's Avatar
    Modmetractor

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Coding Something
    Posts
    27,121
    EW, its a double ended wire so you can cut 1 in half to get 2 pinned ends

    OEM RETROFITS - CRUISE CONTROL - SAT NAV - BLUETOOTH - AMI - HEADLIGHT SYSTEMS

    PARKING SYSTEMS - DIAGNOSTICS - FAULT FINDING - BODYWORK - PAINTWORK

  40. #159
    Khufu's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2003
    Location
    West coast of Scotland
    Posts
    5,693
    Sweet, I wonder if the delivery van will happily drop off a few wires LOL
    2003-2008 1998 Red A3 8L 1.8 Sport
    2008 -> 2003 Akoya Silver A3 8P1 2.0 FSi Sport

  41. #160
    NHN
    NHN's Avatar
    Modmetractor

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Coding Something
    Posts
    27,121
    Be warned you might have to buy 5 in a bag, but ask dealer to check the technicians wire box as they hold one of these in each dealership for wiring repairs, if from the box then they will charge you per.

    OEM RETROFITS - CRUISE CONTROL - SAT NAV - BLUETOOTH - AMI - HEADLIGHT SYSTEMS

    PARKING SYSTEMS - DIAGNOSTICS - FAULT FINDING - BODYWORK - PAINTWORK

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO