Volks AutosEM Tuning
Results 1 to 27 of 27
  1. #1
    Neutral

    Status
    Offline
    Join Date
    Apr 2009
    Posts
    41

    I want to fit an S3 body kit to my new Black Edition A3...

    I have ordered a new A3 Black Edition due for delivery middle of July this is a MY10 build. It is coming in Phantom Black and I would like to add S3 skirts, rear valance and front bumper.

    Has anyone done this?

    Can it be done?

    How much does it cost?

    What parts and numbers do I need.

    I would also like to lower the car, does anyone have any suggestions as to what I should use?

    Cheers

    Please help

  2. # ADS
    ADS
    Join Date
    Always
    Posts
    Many
     
  3. #2
    6th Gear

    Status
    Offline
    Join Date
    Oct 2008
    Location
    Telford
    Posts
    2,488
    Yes the rear valance will go straight on, the side skirts come in lots of bits but yes they will fit. Cant see the point in the front bumper to be honest, its hardly any different. just change the grille.

    Dont put any S3 badges on it though for fear of looking very silly indeed!
    B6 1.8T Avant s line gmbh

  4. #3
    Neutral

    Status
    Offline
    Join Date
    Apr 2009
    Posts
    41
    Have you done this, and how do the skirts fit on bond or clips

  5. #4
    6th Gear

    Status
    Offline
    Join Date
    Oct 2008
    Location
    Telford
    Posts
    2,488
    No i havent but read lots about it! The skirts are bonded and clipped
    B6 1.8T Avant s line gmbh

  6. #5
    Neutral

    Status
    Offline
    Join Date
    Apr 2009
    Posts
    41
    I read some where that you have to change the sills

  7. #6
    6th Gear

    Status
    Offline
    Join Date
    Oct 2008
    Location
    Telford
    Posts
    2,488
    nah, its only the plastic inner sill you have to change because it leaves a gap if you keep the original. You also have to change the weather strips/trims on the bottoms of the doors to keep the seal correct.
    B6 1.8T Avant s line gmbh

  8. #7
    Neutral

    Status
    Offline
    Join Date
    Apr 2009
    Posts
    41
    Is this an easy job or a pain in the ass

  9. #8
    6th Gear

    Status
    Offline
    Join Date
    Oct 2008
    Location
    Telford
    Posts
    2,488
    I would say fiddley more than difficult. I personally wouldnt do it myself to a brand new car however i would try it on mine!
    B6 1.8T Avant s line gmbh

  10. #9
    Neutral

    Status
    Offline
    Join Date
    Apr 2009
    Posts
    41
    Better to do it when its new to get a better paint match

  11. #10
    Khufu's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2003
    Location
    West coast of Scotland
    Posts
    5,693
    NHN has done it, he might be on to give suggestions ay some point today. As said bit fiddly and not cheap but it does look good. Like Lee said, you need the sills, the replacement trim for the bottom of your doors & the sill covers.
    2003-2008 1998 Red A3 8L 1.8 Sport
    2008 -> 2003 Akoya Silver A3 8P1 2.0 FSi Sport

  12. #11
    Boydie's Avatar
    Boycie

    Status
    Offline
    Join Date
    Dec 2006
    Location
    Greenisland, Co.Antrim
    Posts
    4,814
    I would just put side skirts on or get some votex skirts for it and forget about the front and rear bumpers

    Get some nice wheels for it and lower - job done!

  13. #12
    PaulAr's Avatar
    S3 (8P)

    Status
    Offline
    Join Date
    Mar 2008
    Location
    Tyne & Wear
    Posts
    4,047
    Quote Originally Posted by Boydie View Post
    I would just put side skirts on or get some votex skirts for it and forget about the front and rear bumpers

    Get some nice wheels for it and lower - job done!
    Spot on.
    I`m really not a fan of the `lookalike` route, if you want to tweak the styling, go for quality aftermarket stuff as Boydies suggests.

    Votex, sensible drop, BBS rims, etc....
    Its an expensive car so you want it right.

    Dont make it look like an S3, make it look like a tastelfully tweaked Blackline.

    All IMO of course.

    cheers
    Paul
    Now:
    -MK2 Golf Gti 16V/VR6, Oak Green, Shrick, Intake, Decat, Kish Retrim, Lenso BSX..
    -BMW 335d Xdrive, Estoril Blue, fully loaded.

    Before:
    S3 (8P), Ibis, DSG, Milltek, SHARK

    BMW 320d M Sport
    S3 (8P), Sprint, REVO, H&R Springs, BBS CHs,

    Golf MK5 GTi 20TFSI - REVO Stage1, Red.
    Golf MK5 GTi 20TFSI - Std, Shadow Blue
    Civic Type `R`
    Golf MK4 GTi 18T - 200bhp, MTM ECU, Forge DV
    Golf MK3 VR6 - Cat Back
    Corrado VR6 - JAMEX
    Corrado G60 - JAMEX, BRM Charger rebuild
    etc....

  14. #13
    Neutral

    Status
    Offline
    Join Date
    Apr 2009
    Posts
    41
    How low can you drop it before it starts to rub with people in the back

  15. #14
    Neutral

    Status
    Offline
    Join Date
    May 2009
    Location
    Birmingham
    Posts
    95
    with the money your spending on the car and then the kit and painting etc, surely you would of been eaiser getting an S3 anyway??

  16. #15
    Neutral

    Status
    Offline
    Join Date
    Apr 2009
    Posts
    41
    Need a derv, just got rid os a Focus ST2

  17. #16
    Neutral

    Status
    Offline
    Join Date
    Apr 2009
    Posts
    41
    any one want to add

  18. #17
    Ash B's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jul 2008
    Location
    Cardiff
    Posts
    5,806
    I'd just leave it as it is mate. Just change it to a Black S3 grill if you want an S-line badge. Wouldnt be buying a new car and then changing all that.
    Waste of money & time if you ask me mate. Black Edition look fine how they are little things to improve the look, would of been better if they had there own kind of badge like S-line do.


    If i was to do any thing to the car it be:
    Lowering springs or coilovers.
    Some nice 19" BBS alloys
    S3 Grill so i could have an s-line badage at front. (dont like the new a3 withou them).
    Remap etc
    I know you said you need a derv but with all that mate, might aswell get an S3 with no extra's or a nice used one.
    With all the parts you will need (will have to be new) & with painting and fitting gonna cost . And i cant really see all the parts you need coming up on ebay and if they do will cost extra as most sellers on there a simple.

    Thanks

    Ashley
    Last edited by Ash B; 23rd June 2009 at 19:44.
    Dark Vader Half sibling - MyThread

  19. #18
    Neutral

    Status
    Offline
    Join Date
    Apr 2009
    Posts
    41
    Fitting and paint is no probs I am in the trade.

    Foreman at scania trucks dealer

  20. #19
    Ash B's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jul 2008
    Location
    Cardiff
    Posts
    5,806
    Ok fitting and painting sorted. But what its gonna cost to get genuine parts..I'd still not bother. I know the pre face lift S3 Bumper was about 240-250 fog lights were about 50 each and the surrounds about 20 each. Then you will need a grill not even sure how much the grills are think the black one pre face lift was about 250 or 220. Basically i'd say its not worth it. But if you want to go down that line.

    Your gonna need
    S3 Grill
    S3 Front Bumper
    S3 Fog lights
    S3 Fog light Surrounds
    S3 Back Bumper
    S3 Lower Lip (for back bumper)
    S3 Spoiler
    S3 Skirts and i dont know too much myself about them but i know they cost NHN aka nigel a bit to do and it was tricky.
    Also have to do some thing with your exhaust as it wont fit properly to the S3 back bumper. Well i know that was the problem with pre-face lift S3 back bumper not too sure with face lift.

    Ashley
    Dark Vader Half sibling - MyThread

  21. #20
    Neutral

    Status
    Offline
    Join Date
    Apr 2009
    Posts
    41
    S3 Side skirts in primer 127.06 each inc vat
    S3 Rear Lower Skirt comes in Grey metallic same as black edition or primer(choice) 138.97


    I think I might keep the front bumper as is because there isn't much difference

  22. #21
    10blazin's Avatar
    HYPERDRIVE NEEDED

    Status
    Offline
    Join Date
    Dec 2008
    Location
    gorton
    Posts
    3,272
    you know what mate do something different anyone who looks at your car even after the mods will be like oh theres an s3 ....

    if you want to turn heads why dont you do something different drop the car on 19s and get an after market kit , it would look the biz and no one has done this yet get to it pal i defo would if i had the money....or you could even mix the kits and after market grill.... its the way forward you will see where your moneys gone

    abt





    or caractere


  23. #22
    smudge_don's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Sutton, Surrey
    Posts
    2,941
    im doing a few caractere thing with my A3, and something custom on the front

  24. #23
    10blazin's Avatar
    HYPERDRIVE NEEDED

    Status
    Offline
    Join Date
    Dec 2008
    Location
    gorton
    Posts
    3,272
    pics smudge or when you finish get some on ....

    you know it makes sence dave...............

  25. #24
    Neutral

    Status
    Offline
    Join Date
    Apr 2009
    Posts
    41
    My only worry with that is I will look like a boy racer, I see your point though

  26. #25
    10blazin's Avatar
    HYPERDRIVE NEEDED

    Status
    Offline
    Join Date
    Dec 2008
    Location
    gorton
    Posts
    3,272
    no it wont look boy racer the abt kit look pretty nice id lose the vents on the side wings though and it will look very nice.....

    if you seen mine up close its just been dropped not to low on 19 inch rims tints and cupra spoiler it doesnt look boy racer at all...

    i get looks and comment off all ages .....if the mods are tastfull then you have nothing to worry about all my mods cost 1200 quid in total with rims and tyres and ive totally achieved a nice oem look for cheap ..

    you could achieve that for the same price and your car would look miles better mate medium tints though not to dark i think black edition already has privacy glass so just subtle tints the fronts side windows get some springs 19 inch bling wheels mine would look the nuts on your car or some other wheels shiney though but not tacky ..

    you should try that first if your still not happy go for a kit......
    Last edited by 10blazin; 23rd June 2009 at 22:37.

  27. #26
    10blazin's Avatar
    HYPERDRIVE NEEDED

    Status
    Offline
    Join Date
    Dec 2008
    Location
    gorton
    Posts
    3,272
    but if your not happy with that and want a kit it would be abt front abt rear caractere side skits and it still would look pretty oem but nicer imho and will be different to anyone elses .....

    you certainly wouldnt have any probs selling it when the time comes
    Last edited by 10blazin; 23rd June 2009 at 23:32.

  28. #27
    PregnantNproud's Avatar
    Gears of War

    Status
    Offline
    Join Date
    May 2009
    Location
    Near Kent
    Posts
    301
    Quote Originally Posted by Black Edition Dave View Post
    My only worry with that is I will look like a boy racer, I see your point though
    I see People's point.

    But personally i find an aftermarket bodykit immediately lacks integrity, and does look a bit boy racer in comparison to a genuine S3 kit on an A3.

    I find that as long as you don't put and s3 badges on the car your good to go. The car may lack orgionality in the dept of modifications but black edition dave is attaching the only real kit the a3 model should have.

    For the parts you want you may be looking at around 910 plus around 500 or more to spray it. (that's what i was quoted) I was also quoted around 300 for removal of those parts and attachment of the s3 parts. So total could be around 1700.
    Last edited by PregnantNproud; 10th July 2009 at 03:11.

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO