Badger5EM Tuning
Page 1 of 2 12 LastLast
Results 1 to 40 of 59
Like Tree10Likes

Thread: NEW - AS / AMD CAI

  1. #1
    mephisto's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Oct 2004
    Posts
    192

    NEW - AS / AMD CAI

    Ok not wanting to thread hijack previous Revo CAI thread :Revo Air Intake Fitted

    Thought id continue here:

    This is re the new CAI being developed by AMD/AS


    Auto Specialists - AS Performance 2.0 TFSi Induction Kit - With or Without cold feed scoop

    Ive just got off the phone to a very helpful chap at AS who says they're still working on the Cold feed scoop due to the fact it was primarily developed on a Golf but the scoop as it stands needs modifying slight to fit the S3. I guess that could be Alex's they are working on at AMD today to get it right?

    Was discussing gains of 20bhp with this pipe. Of course some official figures supplied would be nice.

    350 sheets all in, potential discount on group buy anyone?
    2009 S3 8P Phantom Black
    MODS : S3 Keyring

  2. # ADS
    ADS
    Join Date
    Always
    Posts
    Many
     
  3. #2
    ben@amdessex's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Aug 2008
    Posts
    279
    Afternoon All,

    Just put a news story up about the kit.

    New AmD Tuning 2.0 TFSi Induction kit!



    We were planning on having some official figures up today but we have been absolutley flat out with work. Fingers crossed we shall have one on the dyno with a back to back test against the standard setup tomorrow. From the pre-production kit and performance on the road we know it is better but we will put some official figures on it.

    Due to a slight difference in the front panel between the Golf and the S3 we do need to make a small adjustment to the heat shield.

    We have already fitted them to two S3's today, as we can make the adjustment here but they will be adjusted for general sale within the next batch.

    We have already sold all the kits from the first batch!

    Here are some pictures, please excuse the quality as none of us have our DSLR's with us today but will have tomorrow, for some better photos.

    Black kit on an ED30





    Red kit on an S3

    Last edited by ben@amdessex; 12th February 2013 at 17:55.

    AmD Essex - West Thurrock, Essex 01708 861827- Open Mon-Sat. www.amdessex.com. 1000BHP 4WD Rolling Road-Workshop and Servicing- Mail Order- Chipping/Remapping from �299. Milltek- REVO - Mintex- Forge- SuperPro- KW - Weitec -Eibach- H&R- AP + more!

  4. #3
    S3Alex's Avatar
    Rarely neutral

    Status
    Online
    Join Date
    Dec 2008
    Posts
    5,323
    I don't think any of those cars are mine...LOL....they're too clean!

  5. #4
    Morells's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Aug 2012
    Location
    Hay-On-Wye
    Posts
    363
    I know this is a stupid question but with the heat shield would it fit a ITG CAI? I know the answer is probably no but worth a ask as I want a neat heat shield haha
    New Car
    Audi S3 Sprint Blue Oscarli Stage 2+
    Old Cars

    Audi TTRS 2010 Phantom Black Oscarli Stage 1
    Audi S3 2009 Facelift Ibis White (Recaro Buckets)
    Audi S3 2009 Pre-Facelift Solar Orange Oscarli Stage 2
    Audi A1 185 2011 White

  6. #5
    ben@amdessex's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Aug 2008
    Posts
    279
    Quote Originally Posted by S3Alex View Post
    I don't think any of those cars are mine...LOL....they're too clean!
    Yours is still up in the air, we have 4 S3's here all having one!

    Quote Originally Posted by Morells View Post
    I know this is a stupid question but with the heat shield would it fit a ITG CAI? I know the answer is probably no but worth a ask as I want a neat heat shield haha
    I have an S3 here with that kit fitted. We shall give it a go and let you know!

    AmD Essex - West Thurrock, Essex 01708 861827- Open Mon-Sat. www.amdessex.com. 1000BHP 4WD Rolling Road-Workshop and Servicing- Mail Order- Chipping/Remapping from �299. Milltek- REVO - Mintex- Forge- SuperPro- KW - Weitec -Eibach- H&R- AP + more!

  7. #6
    Morells's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Aug 2012
    Location
    Hay-On-Wye
    Posts
    363
    Quote Originally Posted by ben@amdessex View Post
    I have an S3 here with that kit fitted. We shall give it a go and let you know!
    that would be great and if it fits I will be having one off you if you are willing to sell one
    New Car
    Audi S3 Sprint Blue Oscarli Stage 2+
    Old Cars

    Audi TTRS 2010 Phantom Black Oscarli Stage 1
    Audi S3 2009 Facelift Ibis White (Recaro Buckets)
    Audi S3 2009 Pre-Facelift Solar Orange Oscarli Stage 2
    Audi A1 185 2011 White

  8. #7
    S3Alex's Avatar
    Rarely neutral

    Status
    Online
    Join Date
    Dec 2008
    Posts
    5,323
    Quote Originally Posted by ben@amdessex View Post
    Yours is still up in the air, we have 4 S3's here all having one! I have an S3 here with that kit fitted. We shall give it a go and let you know!
    Hi Ben...I know!...it's wierd seeing that many all at one time.

  9. #8
    mephisto's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Oct 2004
    Posts
    192
    I was supposed to add drum roll here!
    2009 S3 8P Phantom Black
    MODS : S3 Keyring

  10. #9
    RedDejavu's Avatar
    5th Gear

    Status
    Online
    Join Date
    Feb 2011
    Location
    Bracknell
    Posts
    1,458
    Quote Originally Posted by mephisto View Post
    I was supposed to add drum roll here!
    drum roll master you are
    Be patient. English is tough.

    Now:

    61 Audi S3 BE S-Tronic Ibis White: Build Thread.
    / Black Edition pack (SatNav, Bluetooth) / Parking Sensors / Tinted windows / piano inlays and finish / Cruise Control / Interior light pack /
    /Mods: REVO Stage 2+: Revo Intake / BCS Powervalve TBE system / LOBA HPFP / Crystal Clear H11 FOGS / Black roof + spoiler vinyl wrap / H&R Anti-roll bars / Superpro ALK /


  11. #10
    mephisto's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Oct 2004
    Posts
    192
    Hah!

    RedDejavu likes this.
    2009 S3 8P Phantom Black
    MODS : S3 Keyring

  12. #11
    mephisto's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Oct 2004
    Posts
    192
    Well if no figures are up tomorrow im going with the REVO, cant wait forever!
    2009 S3 8P Phantom Black
    MODS : S3 Keyring

  13. #12
    RedDejavu's Avatar
    5th Gear

    Status
    Online
    Join Date
    Feb 2011
    Location
    Bracknell
    Posts
    1,458
    Quote Originally Posted by mephisto View Post
    Well if no figures are up tomorrow im going with the REVO, cant wait forever!
    I am divided between these two as well... but provisionally ordered AMD, they claim 10-15 over stock bhp
    Be patient. English is tough.

    Now:

    61 Audi S3 BE S-Tronic Ibis White: Build Thread.
    / Black Edition pack (SatNav, Bluetooth) / Parking Sensors / Tinted windows / piano inlays and finish / Cruise Control / Interior light pack /
    /Mods: REVO Stage 2+: Revo Intake / BCS Powervalve TBE system / LOBA HPFP / Crystal Clear H11 FOGS / Black roof + spoiler vinyl wrap / H&R Anti-roll bars / Superpro ALK /


  14. #13
    S3Alex's Avatar
    Rarely neutral

    Status
    Online
    Join Date
    Dec 2008
    Posts
    5,323
    Can't post up any figures from mine right now as it's in bits.

  15. #14
    mephisto's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Oct 2004
    Posts
    192
    Fcuk me my arms are aching maybe they can knock up some carbon fibre drumsticks whilst im waiting.

    Alex was thinkin this morning over my scrambled eggs, as you do, why have you swapped in a perfectly good ITG CAI for the AMD/AS one? Aesthetics or perhaps power curve i guess, as i can't believe there will be much a of a Rizzla skin between them in outright performance?
    RedDejavu likes this.
    2009 S3 8P Phantom Black
    MODS : S3 Keyring

  16. #15
    ben@amdessex's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Aug 2008
    Posts
    279
    Sorry chaps, we were just flat out yesterday and getting customers cars done had to take priority as I am sure you can understand.

    Looking alot more promising for today.

    AmD Essex - West Thurrock, Essex 01708 861827- Open Mon-Sat. www.amdessex.com. 1000BHP 4WD Rolling Road-Workshop and Servicing- Mail Order- Chipping/Remapping from �299. Milltek- REVO - Mintex- Forge- SuperPro- KW - Weitec -Eibach- H&R- AP + more!

  17. #16
    S3Alex's Avatar
    Rarely neutral

    Status
    Online
    Join Date
    Dec 2008
    Posts
    5,323
    Quote Originally Posted by mephisto View Post
    Fcuk me my arms are aching maybe they can knock up some carbon fibre drumsticks whilst im waiting.

    Alex was thinkin this morning over my scrambled eggs, as you do, why have you swapped in a perfectly good ITG CAI for the AMD/AS one? Aesthetics or perhaps power curve i guess, as i can't believe there will be much a of a Rizzla skin between them in outright performance?
    Curiosity!

    Hopefully it won't kill the cat,but there are a few points that interest me,the first being the overall maximum diameter,and more importantly,the narrowest section is where the MAF is,and the silicon pipework to that section has a very smooth and gentle reduction in diameter.

    From what I know of gas flow physics(which is limited and specific to what I do only),this should improve flow characteristics in this region.

    So...we'll see.

  18. #17
    RedDejavu's Avatar
    5th Gear

    Status
    Online
    Join Date
    Feb 2011
    Location
    Bracknell
    Posts
    1,458
    Quote Originally Posted by S3Alex View Post
    Curiosity!

    Hopefully it won't kill the cat,but there are a few points that interest me,the first being the overall maximum diameter,and more importantly,the narrowest section is where the MAF is,and the silicon pipework to that section has a very smooth and gentle reduction in diameter.

    From what I know of gas flow physics(which is limited and specific to what I do only),this should improve flow characteristics in this region.

    So...we'll see.
    This is the main reason I'm changing my VWR which could not maintain good fuel trim figures due to rubbish MAF section. Only worried about too much noise but hopefully it wont be that bad.
    Be patient. English is tough.

    Now:

    61 Audi S3 BE S-Tronic Ibis White: Build Thread.
    / Black Edition pack (SatNav, Bluetooth) / Parking Sensors / Tinted windows / piano inlays and finish / Cruise Control / Interior light pack /
    /Mods: REVO Stage 2+: Revo Intake / BCS Powervalve TBE system / LOBA HPFP / Crystal Clear H11 FOGS / Black roof + spoiler vinyl wrap / H&R Anti-roll bars / Superpro ALK /


  19. #18
    S3Alex's Avatar
    Rarely neutral

    Status
    Online
    Join Date
    Dec 2008
    Posts
    5,323
    Quote Originally Posted by RedDejavu View Post
    This is the main reason I'm changing my VWR which could not maintain good fuel trim figures due to rubbish MAF section. Only worried about too much noise but hopefully it wont be that bad.
    I've not had problems with the original ITG in that respect,but the overall setup of my car is very different to yours,and even the software will be different.

  20. #19
    S3Alex's Avatar
    Rarely neutral

    Status
    Online
    Join Date
    Dec 2008
    Posts
    5,323

    NEW - AS / AMD CAI

    Just seen one fitted from the first production run.

    First impressions were of a really well thought out system and from the diameter side certainly the biggest and best thought out I've seen.

    The reduction for the MAF is smooth and carefully done so it should preserve as much laminar flow as possible when compared to the sharp steps of some other systems.

    No pics from me yet as mine will be fitted shortly.

  21. #20
    S.
    S.'s Avatar
    5th Gear

    Status
    Offline
    Join Date
    Mar 2009
    Location
    N/A
    Posts
    1,422
    Quote Originally Posted by S3Alex View Post
    Just seen one fitted from the first production run.

    First impressions were of a really well thought out system and from the diameter side certainly the biggest and best thought out I've seen.

    The reduction for the MAF is smooth and carefully done so it should preserve as much laminar flow as possible when compared to the sharp steps of some other systems.

    No pics from me yet as mine will be fitted shortly.
    yeah that reduction seems to me to be the best improvement over other intakes.
    S3Alex likes this.
    s3 Ibis White ... Build Thread

    / Black Grill / FbMfSw / Sunroof / Hill Hold / Armrest / Black Leather-Alcantara interior / Rear Parking Sensors / Heated Seats / Folding Mirrors / Cruise / Rns-e mk2 // ttrs-Brembo Brakes / 12mm spacers / Forge Short + Side Shift / 42dd's / ITG CAI / GfB DV+ / Forge Catch Can / Milltek TBE / Forge Twin IC/ Autotech HpFp / H&R ARB's / WALK / KW v3's / RS4 fpr / Loba&Sachs clutch / Revo Stage 2+ / ...


  22. #21
    S3Alex's Avatar
    Rarely neutral

    Status
    Online
    Join Date
    Dec 2008
    Posts
    5,323

    NEW - AS / AMD CAI

    Quote Originally Posted by S. View Post
    yeah that reduction seems to me to be the best improvement over other intakes.
    The shield under the intake is also well sorted and funnels airflow from the old intake slot at the front grill(where the OEM intake was) to the filter.

    Anyway....have to wait until I see how it goes on mine.

    I have a few things being sorted out right now.

  23. #22
    Morells's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Aug 2012
    Location
    Hay-On-Wye
    Posts
    363
    Quote Originally Posted by S3Alex View Post
    The shield under the intake is also well sorted and funnels airflow from the old intake slot at the front grill(where the OEM intake was) to the filter.

    Anyway....have to wait until I see how it goes on mine.

    I have a few things being sorted out right now.

    get them to see if the heat shield fits a itg system i need one
    New Car
    Audi S3 Sprint Blue Oscarli Stage 2+
    Old Cars

    Audi TTRS 2010 Phantom Black Oscarli Stage 1
    Audi S3 2009 Facelift Ibis White (Recaro Buckets)
    Audi S3 2009 Pre-Facelift Solar Orange Oscarli Stage 2
    Audi A1 185 2011 White

  24. #23
    Neutral

    Status
    Online
    Join Date
    May 2012
    Posts
    39
    Quote Originally Posted by Morells View Post
    get them to see if the heat shield fits a itg system i need one
    Plus one for this as if it does i know what i am ordering next.

  25. #24
    S3Alex's Avatar
    Rarely neutral

    Status
    Online
    Join Date
    Dec 2008
    Posts
    5,323

    NEW - AS / AMD CAI

    Quote Originally Posted by Morells View Post
    get them to see if the heat shield fits a itg system i need one
    Drop Ben a line.

    Sure he can check.

  26. #25
    ben@amdessex's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Aug 2008
    Posts
    279
    Ben will be checking next week, once we get the next lot of stock in and I'll have some figures for you this afternoon.

    AmD Essex - West Thurrock, Essex 01708 861827- Open Mon-Sat. www.amdessex.com. 1000BHP 4WD Rolling Road-Workshop and Servicing- Mail Order- Chipping/Remapping from �299. Milltek- REVO - Mintex- Forge- SuperPro- KW - Weitec -Eibach- H&R- AP + more!

  27. #26
    Morells's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    Aug 2012
    Location
    Hay-On-Wye
    Posts
    363
    Quote Originally Posted by ben@amdessex View Post
    Ben will be checking next week, once we get the next lot of stock in and I'll have some figures for you this afternoon.
    Thanks looking forward to it
    New Car
    Audi S3 Sprint Blue Oscarli Stage 2+
    Old Cars

    Audi TTRS 2010 Phantom Black Oscarli Stage 1
    Audi S3 2009 Facelift Ibis White (Recaro Buckets)
    Audi S3 2009 Pre-Facelift Solar Orange Oscarli Stage 2
    Audi A1 185 2011 White

  28. #27
    ben@amdessex's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Aug 2008
    Posts
    279
    Righto, test was carried out on a 2.0 TFSi S3 running a full performance exhaust system with a standard air box and then our intake added (standard software)...

    ...peak gains were 15bhp and 16 lbft of torque, with a good consistent increase throughout the mid range too! Spot on for an intake I would say!

    Just converting the graph to an internet friendly format and I shall post it up on here.

    AmD Essex - West Thurrock, Essex 01708 861827- Open Mon-Sat. www.amdessex.com. 1000BHP 4WD Rolling Road-Workshop and Servicing- Mail Order- Chipping/Remapping from �299. Milltek- REVO - Mintex- Forge- SuperPro- KW - Weitec -Eibach- H&R- AP + more!

  29. #28
    ben@amdessex's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Aug 2008
    Posts
    279
    Here you go. Standard software plus Milltek down pipe with sports cat. Only changes were to the intake system. Car also stayed strapped on the dyno, to have the AmD/AS intake fitted.



    We will also test is on a mapped car between stock intake and our intake too.

    AmD Essex - West Thurrock, Essex 01708 861827- Open Mon-Sat. www.amdessex.com. 1000BHP 4WD Rolling Road-Workshop and Servicing- Mail Order- Chipping/Remapping from �299. Milltek- REVO - Mintex- Forge- SuperPro- KW - Weitec -Eibach- H&R- AP + more!

  30. #29
    mephisto's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Oct 2004
    Posts
    192
    Quote Originally Posted by ben@amdessex View Post
    Here you go. Standard software plus Milltek down pipe with sports cat. Only changes were to the intake system. Car also stayed strapped on the dyno, to have the AmD/AS intake fitted.
    Great work thanks Ben! Now when are they available with the heatshield, or can i order onem dispatch the CAI, then send along the heat shield once it's ready?
    2009 S3 8P Phantom Black
    MODS : S3 Keyring

  31. #30
    ben@amdessex's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Aug 2008
    Posts
    279
    They should be ready for the end of next week with the modification on the heatshield for the S3. I take it yours is a face lift model? Best to get your order in early especially if you would like a lairy colour!

    AmD Essex - West Thurrock, Essex 01708 861827- Open Mon-Sat. www.amdessex.com. 1000BHP 4WD Rolling Road-Workshop and Servicing- Mail Order- Chipping/Remapping from �299. Milltek- REVO - Mintex- Forge- SuperPro- KW - Weitec -Eibach- H&R- AP + more!

  32. #31
    S3Alex's Avatar
    Rarely neutral

    Status
    Online
    Join Date
    Dec 2008
    Posts
    5,323
    Quote Originally Posted by ben@amdessex View Post
    Here you go. Standard software plus Milltek down pipe with sports cat. Only changes were to the intake system. Car also stayed strapped on the dyno, to have the AmD/AS intake fitted.



    We will also test is on a mapped car between stock intake and our intake too.
    Looking forwards to seeing what you get on some mapped cars......and what it does for mine.

  33. #32
    mephisto's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Oct 2004
    Posts
    192
    Alex any reason why you went for the AMD/AS Intake over the Revo CAI ? How about the reduction area for the MAF on the REVO CAI looks good too?
    2009 S3 8P Phantom Black
    MODS : S3 Keyring

  34. #33
    ben@amdessex's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Aug 2008
    Posts
    279
    This looks great!















    RedDejavu likes this.

    AmD Essex - West Thurrock, Essex 01708 861827- Open Mon-Sat. www.amdessex.com. 1000BHP 4WD Rolling Road-Workshop and Servicing- Mail Order- Chipping/Remapping from �299. Milltek- REVO - Mintex- Forge- SuperPro- KW - Weitec -Eibach- H&R- AP + more!

  35. #34
    RedDejavu's Avatar
    5th Gear

    Status
    Online
    Join Date
    Feb 2011
    Location
    Bracknell
    Posts
    1,458
    Wow really nice contrast and quality, I ordered mine in red against white should look great too or maybe try different colour like yellow?
    Last edited by RedDejavu; 16th February 2013 at 19:04.
    Be patient. English is tough.

    Now:

    61 Audi S3 BE S-Tronic Ibis White: Build Thread.
    / Black Edition pack (SatNav, Bluetooth) / Parking Sensors / Tinted windows / piano inlays and finish / Cruise Control / Interior light pack /
    /Mods: REVO Stage 2+: Revo Intake / BCS Powervalve TBE system / LOBA HPFP / Crystal Clear H11 FOGS / Black roof + spoiler vinyl wrap / H&R Anti-roll bars / Superpro ALK /


  36. #35
    mephisto's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Oct 2004
    Posts
    192
    I really do like that colour, the old codger in me says Stealth black, the young lad says them above looks awesome! Thanks for a the pics Ben.
    2009 S3 8P Phantom Black
    MODS : S3 Keyring

  37. #36
    RedDejavu's Avatar
    5th Gear

    Status
    Online
    Join Date
    Feb 2011
    Location
    Bracknell
    Posts
    1,458
    any more news AMD?
    Be patient. English is tough.

    Now:

    61 Audi S3 BE S-Tronic Ibis White: Build Thread.
    / Black Edition pack (SatNav, Bluetooth) / Parking Sensors / Tinted windows / piano inlays and finish / Cruise Control / Interior light pack /
    /Mods: REVO Stage 2+: Revo Intake / BCS Powervalve TBE system / LOBA HPFP / Crystal Clear H11 FOGS / Black roof + spoiler vinyl wrap / H&R Anti-roll bars / Superpro ALK /


  38. #37
    mephisto's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Oct 2004
    Posts
    192
    Well apparently AMD have some more available tomorrow onwards, fingers crossed. I want it NOW! I still think im going Orange..
    RedDejavu likes this.
    2009 S3 8P Phantom Black
    MODS : S3 Keyring

  39. #38
    RedDejavu's Avatar
    5th Gear

    Status
    Online
    Join Date
    Feb 2011
    Location
    Bracknell
    Posts
    1,458
    Quote Originally Posted by mephisto View Post
    Well apparently AMD have some more available tomorrow onwards, fingers crossed. I want it NOW! I still think im going Orange..
    happy days!
    Be patient. English is tough.

    Now:

    61 Audi S3 BE S-Tronic Ibis White: Build Thread.
    / Black Edition pack (SatNav, Bluetooth) / Parking Sensors / Tinted windows / piano inlays and finish / Cruise Control / Interior light pack /
    /Mods: REVO Stage 2+: Revo Intake / BCS Powervalve TBE system / LOBA HPFP / Crystal Clear H11 FOGS / Black roof + spoiler vinyl wrap / H&R Anti-roll bars / Superpro ALK /


  40. #39
    S3Alex's Avatar
    Rarely neutral

    Status
    Online
    Join Date
    Dec 2008
    Posts
    5,323

    NEW - AS / AMD CAI

    Quote Originally Posted by mephisto View Post
    Well apparently AMD have some more available tomorrow onwards, fingers crossed. I want it NOW! I still think im going Orange..
    You'll maybe get some figures from mine shortly depending on AMDs time constraints.

    Only issue with dyno numbers on mine is that the Haldex doesn't like dynos at that sort of power level so we always have problems gauging maximum power as it pulls timing and boost on the dyno.

  41. #40
    S3Alex's Avatar
    Rarely neutral

    Status
    Online
    Join Date
    Dec 2008
    Posts
    5,323

    NEW - AS / AMD CAI

    .

 

 
Page 1 of 2 12 LastLast

Similar Threads

  1. Saves me starting a new thread - anyone selling an ITG CAI for S3?
    By Boydie in forum A3/S3/Sportback (8P Chassis)
    Replies: 7
    Last Post: 26th November 2010, 02:57
  2. Cool New AmD Milltek Racing T-Shirts
    By ben@amdessex in forum News & Latest Offers
    Replies: 0
    Last Post: 15th July 2010, 09:35
  3. Is anyone considering the new pipercross venom CAI?
    By Johnnyb in forum A3/S3/Sportback (8P Chassis)
    Replies: 20
    Last Post: 2nd February 2010, 09:50
  4. New AMD Remaps!
    By vanilla_ice in forum A3/S3 Forum (8L Chassis)
    Replies: 7
    Last Post: 12th January 2007, 18:12
  5. New CAI for A4 1.8T
    By kenny_boon in forum A4/A4 cabriolet/S4 forum(B6 chassis)
    Replies: 17
    Last Post: 13th August 2005, 22:55

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO