Rear wiper has to go...

C

CorrDogg58

Registered User
Joined
Jan 24, 2012
Messages
92
Reaction score
3
Points
8
Location
NULL
How easy is this to do and what size bung do I need to fill the gap left?
 
i think there are caps for sale in classifieds section.
 
Is it easy to remove the wiper and what tools do i need?
because I have a few mates who had to cut it off
 
audi upgrades
Take off the cap on the back wiper in the middle and use a 8mm or 10mm socket to remove the nut (cant rememeber the exact size) Use wd40 to loosen up the wiper then take your time and be patient to remove the actual wiper arm.
the will need to remove the 2 t25 torx screws from inside the boot panel and pull the boot panel off. Then it's a case of disconnecting the wiper motor and using the correct socket to undo the rear wiper motor.
 
  • Like
Reactions: CorrDogg58
Ash187 said:
Take off the cap on the back wiper in the middle and use a 8mm or 10mm socket to remove the nut (cant rememeber the exact size) Use wd40 to loosen up the wiper then take your time and be patient to remove the actual wiper arm.
the will need to remove the 2 t25 torx screws from inside the boot panel and pull the boot panel off. Then it's a case of disconnecting the wiper motor and using the correct socket to undo the rear wiper motor.
Click to expand...
Thank you very much for this my friend. Do you know what size the whole is for a bung to fit into it?
 
my rear screen gets covered with spray on motorways +rain when stationary.
no way id delete the wiper.
why do want a rear screen covered with water?
 
You must log in or register to reply here.

Similar threads

S
The Baby Has To Go
Replies
9
Views
977
simonl
simonl
Red Head
My TDI Sport has to go :(
Replies
1
Views
748
davemk
D
Ben85
Rear wiper has a mind of its own
Replies
1
Views
471
ahtcap
A
A
Rear wiper has a mind of its own
Replies
10
Views
4K
Best84
B
jsosic
How to replace rear wiper arm?
Replies
2
Views
961
Mindak
Mindak
Top
Back