A4 wheel fitment on my A3

WALTO TDI

WALTO TDI

Registered User
Joined
Dec 4, 2011
Messages
285
Reaction score
12
Points
18
Location
MIDLANDS
hi guys ive seen a set of alloys i like from an A4.
The size is 18 x 8.0 with an offset of ET47.The centre bore is 66.5
will i need spigot rings?
will these fit under my rear arches as my A3 is lowered?

i currently have standard 5 spoke s line wheels with 10mm spacers on the rear.

i am puzzled with the offest and wheel width so any help is greatly appreciated
 
Bore for an A3 is 57.1mm i believe and the ET should be between 45-50. What is the PCD? 5x110 or 112?
 
That offset is fine, and the rears will fit without the spacers. As BigWilly said, our hubs are 57.1, so you will need rings. And all A4s back to the B5 gen are 5x112 so that won't be an issue. I'm guessing that with a larger hub bore these are off a B8?
 
2012 plate A4 mate. so i will need spigot rings from 57.1 to 66.5, but the offset and rim width are fine?
 
You must log in or register to reply here.

Similar threads

R
Smallest wheel fitment on A3 tdi
Replies
13
Views
2K
FranA3
FranA3
P
Wheel fitment - A6 wheels on an A3
Replies
11
Views
7K
MartayMcFly
MartayMcFly
D
alloy wheel fitment and lowering on A3
Replies
0
Views
763
dindanio1
D
W
2009 A3 Wheel fitment
Replies
6
Views
5K
woohoo
W
S
Wheel Fitment
Replies
3
Views
500
paddy
paddy
Top
Back