AH FabricationsSky Insurance
Results 1 to 11 of 11
  1. #1
    z1mma's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Apr 2012
    Location
    Birmingham
    Posts
    101

    forge twintercooler problema

    Went to get my twinter installed yesterday.. One of the hoses (left) dosent fit tried everything .. We manage to fit it but the hose was so bent no air would pass throu... Forge sent a replacement and it still dosent fit... Any one exp this??
    Audi S3 8p
    H&r springs 25mm | H&R spacers| Milltek exhaust | Induction kit | Autotech HPFP with new cam follower | RS4 Fuel pressure regulator | Later spec “D” Recirculating valve | Revo stage 2+ Software | Uprated sach clutch

    &

    Audi A4 b7 2.0TDi S-line

  2. # ADS
    ADS
    Join Date
    Always
    Location
    Global
    Posts
    Many
     
  3. #2
    z1mma's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Apr 2012
    Location
    Birmingham
    Posts
    101
    Bump
    Audi S3 8p
    H&r springs 25mm | H&R spacers| Milltek exhaust | Induction kit | Autotech HPFP with new cam follower | RS4 Fuel pressure regulator | Later spec “D” Recirculating valve | Revo stage 2+ Software | Uprated sach clutch

    &

    Audi A4 b7 2.0TDi S-line

  4. #3
    S3Alex's Avatar
    Rarely neutral

    Status
    Offline
    Join Date
    Dec 2008
    Posts
    4,791

    forge twintercooler problema

    Call Forge and explain the problem.

    Best also to send a few pics.

    I am no fan of the Twintercooler but I am definitely a fan of their other products and service.

  5. #4
    z1mma's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Apr 2012
    Location
    Birmingham
    Posts
    101
    We have one of their reps comming down start of next week to check it out.. So will see then
    Audi S3 8p
    H&r springs 25mm | H&R spacers| Milltek exhaust | Induction kit | Autotech HPFP with new cam follower | RS4 Fuel pressure regulator | Later spec “D” Recirculating valve | Revo stage 2+ Software | Uprated sach clutch

    &

    Audi A4 b7 2.0TDi S-line

  6. #5
    S3Alex's Avatar
    Rarely neutral

    Status
    Offline
    Join Date
    Dec 2008
    Posts
    4,791
    Quote Originally Posted by z1mma View Post
    We have one of their reps comming down start of next week to check it out.. So will see then
    That's good service.....many companies wouldn't do that......good luck.

  7. #6
    warren_S3's Avatar
    Moderator

    Status
    Offline
    Join Date
    Oct 2007
    Posts
    6,201
    Intrigued.

    I know this will sound like a dim question but you haven't fitted the pipes the wrong way round / or fitted the wrong one on the wrong side?

  8. #7
    z1mma's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Apr 2012
    Location
    Birmingham
    Posts
    101
    Lol i did ask that, but he was defo sure its the right way around, the right hand side is slightly diffrent so wouldnt fit on the left
    Audi S3 8p
    H&r springs 25mm | H&R spacers| Milltek exhaust | Induction kit | Autotech HPFP with new cam follower | RS4 Fuel pressure regulator | Later spec “D” Recirculating valve | Revo stage 2+ Software | Uprated sach clutch

    &

    Audi A4 b7 2.0TDi S-line

  9. #8
    S.
    S.'s Avatar
    5th Gear

    Status
    Offline
    Join Date
    Mar 2009
    Location
    N/A
    Posts
    1,393
    mine didn't fit either had to make and pay custom pipings go to the other shop for pipings and so on, fitting take twice as long and twice as much cash.
    didn't get any replacement forge pipings or anything just we are sorry didn't know that it doesn't fit facelift s3...was really pissed at the moment..
    here are the pics of mine:



    s3 Ibis White ... Build Thread

    / Black Grill / FbMfSw / Sunroof / Hill Hold / Armrest / Black Leather-Alcantara interior / Rear Parking Sensors / Heated Seats / Folding Mirrors / Cruise / Rns-e mk2 // ttrs-Brembo Brakes / 12mm spacers / Forge Short + Side Shift / 42dd's / ITG CAI / GfB DV+ / Forge Catch Can / Milltek TBE / Forge Twin IC/ Autotech HpFp / H&R ARB's / WALK / KW v3's / RS4 fpr / Loba&Sachs clutch / Revo Stage 2+ / ...


  10. #9
    S3Alex's Avatar
    Rarely neutral

    Status
    Offline
    Join Date
    Dec 2008
    Posts
    4,791
    To be honest,the plumbing and so on were amongst the reasons that I went for a single purpose built large intercooler.

  11. #10
    S.
    S.'s Avatar
    5th Gear

    Status
    Offline
    Join Date
    Mar 2009
    Location
    N/A
    Posts
    1,393
    Quote Originally Posted by S3Alex View Post
    To be honest,the plumbing and so on were amongst the reasons that I went for a single purpose built large intercooler.
    we live and learn, don't we
    i told you i'm thinking of switching ic...
    s3 Ibis White ... Build Thread

    / Black Grill / FbMfSw / Sunroof / Hill Hold / Armrest / Black Leather-Alcantara interior / Rear Parking Sensors / Heated Seats / Folding Mirrors / Cruise / Rns-e mk2 // ttrs-Brembo Brakes / 12mm spacers / Forge Short + Side Shift / 42dd's / ITG CAI / GfB DV+ / Forge Catch Can / Milltek TBE / Forge Twin IC/ Autotech HpFp / H&R ARB's / WALK / KW v3's / RS4 fpr / Loba&Sachs clutch / Revo Stage 2+ / ...


  12. #11
    S3Alex's Avatar
    Rarely neutral

    Status
    Offline
    Join Date
    Dec 2008
    Posts
    4,791
    Quote Originally Posted by S. View Post
    we live and learn, don't we i told you i'm thinking of switching ic...
    True.....I've made a few wrong turns along the way with other cars,but thanks to you guys here and on VAGOC,this has been good so far.......have a look at both Airtec and ProAlloy.

 

 

Similar Threads

  1. Forge Twintercooler on S3
    By KRL in forum A3/S3/Sportback (8P Chassis)
    Replies: 60
    Last Post: 14th November 2013, 17:27
  2. Forge Twintercooler
    By DeckedS3 in forum A3/S3/Sportback (8P Chassis)
    Replies: 11
    Last Post: 1st August 2009, 12:50
  3. Forge 2.0T FSi Front Mount Twintercoolers Now 515
    By DPM in forum DPM Performance
    Replies: 0
    Last Post: 16th April 2009, 14:12
  4. Forge Twintercooler....anybody fit one?
    By Rabbit222 in forum A3/S3/Sportback (8P Chassis)
    Replies: 16
    Last Post: 1st April 2009, 13:05

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO