Haldex problem is now abs problem

nokia_aid

Registered User
Joined
Aug 5, 2011
Messages
45
Reaction score
0
Points
6
Location
NULL
ok i had this error coming up

Address 22: AWD Labels: None
Shop #: WSC 00000 000 00000
VCID: 55ABA648FC1A496

4 Faults Found:
16347 - Control Module - EEPROM Error
014 - Defective
02248 - Valve for Controlling Clutch Operating Angle (N373)
014 - Defective
16347 - Control Module - EEPROM Error
014 - Defective
02248 - Valve for Controlling Clutch Operating Angle (N373)
014 - Defective

so i changed my haldex unit and the oil and filter(which was horiffic black oil coming out)

now the code above is gone but i have a new code



Address 22: AWD Labels: 1K0-907-554.lbl
Part No: 1K0 907 554 C
Component: HALDEX 4Motion 0108
Coding: 0000001
Shop #: WSC 00000 000 00000
VCID: 2D5B2EA8B40A1E1

1 Fault Found:
01316 - ABS Control Module
008 - Implausible Signal


anyone have any idea,i know that Part No: 1K0 907 554 C is the new haldex i just fitted


and this one has not gone away


Address 03: ABS Brakes Labels: 1K0-907-379-MK60-A.lbl
Part No: 1K0 907 379 E
Component: ESP ALLRAD MK60 0104
Coding: 0023170
Shop #: WSC 06435 000 00000
VCID: 346D3BCC57204F9

1 Fault Found:
01324 - Control Module for All Wheel Drive (J492)
013 - Check DTC Memory
 
Last edited:
ok the haldex i removed had 1K0907554A and the one i fitted has 1K0907554C on it,could this be an issue maby C is slightly older and not compatable with A
 
Is one module Gen 2, and the other Gen 4?????

Not sure on the error codes, maybe NHN Nige might know.

Sorry cant be more help.
 
my car is a 2005 and the replacement modual came off a 2005 so should both be the same gen
 
Had a look on etka for 1k0907554a this part has been replaced with 1k0525130a which was then dropped and replaced with 1k0525130f which has now been replaced with 1k0525130L on the 01/06/2007.

When you look at the additional info for 1k0525130L there are 2 types G0L 6 speed manual and G0R 6 speed auto.
 
ok the haldex i removed had 1K0907554A and the one i fitted has 1K0907554C on it,could this be an issue maby C is slightly older and not compatable with A

When you put in 1k0907554C part number in etka it tells you it was replaced and then points to 1k0525130L and this control unit changed on the MY08 haldex to gen 4 control units which are in use with all new haldex units.