Volks AutosMonster Motorsport
Results 1 to 3 of 3
  1. #1
    Reverse Gear

    Status
    Offline
    Join Date
    Nov 2010
    Posts
    3

    help with codes what next?

    hey,

    just scan my A3 dont know what to do next!


    Chassis Type: 1K0
    Scan: 01 03 08 09 15 16 17 19 25 42 44 46 47 52 56
    VIN: WAUZZZ8P14A006308 Mileage: 115390km/71700miles
    00-Steering Angle Sensor -- Status: OK 0000
    01-Engine -- Status: Malfunction 0010
    03-ABS Brakes -- Status: Malfunction 0010
    08-Auto HVAC -- Status: Malfunction 0010
    09-Cent. Elect. -- Status: Malfunction 0010
    15-Airbags -- Status: OK 0000
    16-Steering wheel -- Status: OK 0000
    17-Instruments -- Status: OK 0000
    19-CAN Gateway -- Status: OK 0000
    25-Immobilizer -- Status: OK 0000
    42-Door Elect, Driver -- Status: OK 0000
    44-Steering Assist -- Status: OK 0000
    46-Central Conv. -- Status: OK 0000
    47-Sound System -- Status: OK 0000
    52-Door Elect, Pass. -- Status: Malfunction 0010
    56-Radio -- Status: Malfunction 0010

    -------------------------------------------------------------------------------
    Address 01: Engine Labels: Redir Fail!
    Part No SW: 06F 906 056 S HW: Hardware No
    Component: MED9.5.10 G00 5201
    Revision: 00000000 Serial number: AUX7Z0C3FN704D
    Coding: 0000072
    Shop #: WSC 06435 000 00000
    Part No: 06F 907 807 F
    Component: NOX 0901270032 002 0409
    06F907807F NOX 0901270032 002 0409
    1 Fault Found:
    16522 - Oxygen (Lambda) Sensor B1 S2: Signal too High
    P0138 - 001 - Upper Limit Exceeded
    Readiness: 1110 0101
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes Labels: 1K0-907-379-MK60-F.lbl
    Part No: 1K0 907 379 D
    Component: ESP FRONT MK60 0102
    Coding: 0053894
    Shop #: WSC 06435 000 00000
    2 Faults Found:
    00810 - Sensor 1/2 for Brake Pressure
    005 - No or Incorrect Basic Setting / Adaptation
    00778 - Steering Angle Sensor (G85)
    005 - No or Incorrect Basic Setting / Adaptation
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC Labels: 8P0-820-043.lbl
    Part No SW: 8P0 820 043 B HW: 8P0 820 043 B
    Component: KlimavollautomatH11 0120
    Shop #: WSC 06435 000 00000
    1 Fault Found:
    01272 - Positioning Motor for Central Flap (V70)
    003 - Mechanical Failure - Intermittent
    Freeze Frame:
    Fault Status: 00100011
    Fault Priority: 3
    Fault Frequency: 1
    Reset counter: 72
    Mileage: 114600 km
    Time Indication: 0
    Date: 2010.11.29
    Time: 12:54:46
    Freeze Frame:
    Voltage: 12.00 V
    Temperature: 8.0C
    (no units): 24.0
    (no units): 43.0
    Temperature: 0.5C

  2. # ADS
    ADS
    Join Date
    Always
    Posts
    Many
     
  3. #2
    Fossie

    Status
    Offline
    Join Date
    Jan 2010
    Location
    Rhubarb Triangle
    Posts
    3,961
    First thing to do is clear the codes and run the vehicle again.

    Then re-run the scan and see which faults return.

    If you get the same ones back then print a copy of the scan and take it to a dealer/independent approved VAG garage for an estimate for repair !

  4. #3
    Khufu's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2003
    Location
    West coast of Scotland
    Posts
    5,693
    cross reference the code with here.

    Category:Fault Codes - Ross-Tech Wiki

    It can help suggest whats causing fault
    2003-2008 1998 Red A3 8L 1.8 Sport
    2008 -> 2003 Akoya Silver A3 8P1 2.0 FSi Sport

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO