Volks AutosAH Fabrications
Page 3 of 15 FirstFirst 1234567891013 ... LastLast
Results 81 to 120 of 595
Like Tree3Likes

Thread: Oil Catch Can mini group buy anyone? including PCV system simplification.

  1. #81
    2nd Gear

    Status
    Offline
    Join Date
    Aug 2009
    Location
    Gosport, Hants
    Posts
    367
    Quote Originally Posted by jonny87 View Post
    im up for this too ollie, Ł85 is too much of a bargain to resist

    thanks to ollie & imteyaz for sorting this out

    ( 1can + hose please )
    Done

    1. OllieH - Can & Hose
    2. Imteyaz - Can x 2
    3. Speedy Steve - Can & Hose
    4. Morgan-VAGCHECK - Can & Hose
    5. 1Animal1 - Can & Hose
    6. Westle - Can & Hose
    7. J B - Can & Hose
    8. The Doctor - Can & Hose
    9. S3-Chris - Can & Hose
    10. jonny87 - Can & Hose
    2003 Dolphin Grey S3, with a few mods....

  2. # ADS
    ADS
    Join Date
    Always
    Location
    Global
    Posts
    Many
     
  3. #82
    2nd Gear

    Status
    Offline
    Join Date
    Aug 2009
    Location
    Gosport, Hants
    Posts
    367
    Right then, I've had a reply back from Saikoumichi confirming the price. Each can will cost $85 with an additional $6 for delivery. Using a google exchange rate of 0.669 pounds to the dollar, that works out just short of Ł61. Add to that Ł4 (roughly) for me to send the cans on to you, and that totals Ł65. I will leave Imteyaz to post up his own payment methods and amount for the hose, but here are mine:

    My paypal address is peter_hardy1@sky.com

    Looking at this paypal page: https://www.paypal.com/uk/uk/cgi-bin...7353d6a9263490

    it says that if you use funds already in your paypal account, or a bank account linked to paypal, then there are no charges. However, if you use a credit or debit card linked to paypal there will be a charge of 3.4% + 20p. I must ask anyone that uses the latter to cover the fees when sending me money, i.e Ł65 * 1.034 + 20p = Ł67.41. As much as I don't want to do this, I cannot afford to cover everyones fees myself.

    With regards to me paying Saikoumichi, it lists normal payments as being free, however payments that need a currency conversion will include an additional fee of a 2.5% spread above the wholesale exchange rate obtained by paypal?? I think we will just have to wait and see what exchange rate paypal gives us and go from there. If anyone is any wiser when it comes to paypal fees and overseas transactions, please chime up.

    If anyone would rather send their money to me via bank transfer please pm me and I will give you my account details. Also, whatever payment method used, please put your login name as a reference so I know what payment belongs to whom.

    I will ask the people who are maybe coming to collect in person to pay me the full delivered amount now, and then if you do come and pick up, I will refund you the delivery fee there and then

    As soon as I have all payments in I will place the order. Please note, it's not too late to still join the group buy, as long as I have recieved a payment by the time I want to order.

    If I have missed any details out, please let me know.

    Cheers

    Ollie
    Last edited by OllieH; 10th March 2010 at 18:16.
    2003 Dolphin Grey S3, with a few mods....

  4. #83
    Imteyaz's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Oct 2008
    Location
    Warwickshire
    Posts
    524
    I'll go with the same as Ollie using the same rules for payment, if your using a linked card and do not have adequate funds, please add the charges as per Ollie's post above, anybody wanting to do a bank transfer, please PM me and I will give you my details. If you want to send payment via Paypal, please send it to "imteyazgsheikh@hotmail.com". If you wish to come and collect (postcode area CV11), let me know and I will refund you your postage charges on collection.

    The cost of the hose, the T-piece and P&P comes to Ł20.00 (give or take a few pennies).

    Please let me (and Ollie) have your address details, (forum) username and possibly a contact email address / mobile number so that if there are any problems we can contact you directly.

    The hose suppliers will only give a discount based on a minimum order of 10m (5 cans worth x 2m each) so I'll need payment for everybody wanting the hose before I can go and get the hose, I don't want to buy 22m of hose to find someone has pulled out hence the advance payment, Ollie's in the same situation as me so the sooner we get payment, the sooner we can get the parts out to you guys.

    Please bare in mind that this groupbuy is done not as a profit making scheme but as a way of using this forum for the benefit of it's members, we all benefit from better prices using a groupbuy (thanks Ollie), both me an Ollie will try our best to keep you guys posted on the progress status of the order and fingers crossed, everyone will get a great deal out of it at the end!
    Last edited by Imteyaz; 10th March 2010 at 20:33. Reason: forgot to put the price in, doh!
    Imteyaz.

  5. #84
    Dani_B19's Avatar
    Audi-sports own special child.

    Status
    Online
    Join Date
    Nov 2008
    Location
    Barnsley
    Posts
    7,169
    So where are you planning on fitting the cans then?
    Driving the most secretive S3 on ASN

  6. #85
    Imteyaz's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Oct 2008
    Location
    Warwickshire
    Posts
    524
    I'm hoping to attach it to the plastic battery cover (A3, not S3) and just push the hoses onto the can (hope they dont slide off!) so that they can be slipped off when required, lift the battery cover (with can attached) and drain as required. Anybody got any better ideas?
    Imteyaz.

  7. #86
    Dani_B19's Avatar
    Audi-sports own special child.

    Status
    Online
    Join Date
    Nov 2008
    Location
    Barnsley
    Posts
    7,169
    Tbh on the s3 theres not many places to fit it.

    Only place i found is where ive got it but would like to move it but dont know where to.
    Driving the most secretive S3 on ASN

  8. #87
    2nd Gear

    Status
    Offline
    Join Date
    Aug 2009
    Location
    Gosport, Hants
    Posts
    367
    Hoping to get it in one of the following positions. Granted they're not S3 pics, but will just play around until it's in there and looking good.





    2003 Dolphin Grey S3, with a few mods....

  9. #88
    2nd Gear

    Status
    Offline
    Join Date
    Aug 2009
    Location
    Gosport, Hants
    Posts
    367
    Here is an updated list of payments received. Bold writing indicates what's been paid for.

    1. OllieH - Can & Hose
    2. Imteyaz - Can x 2
    3. Speedy Steve - Can & Hose
    4. Morgan-VAGCHECK - Can & Hose
    5. 1Animal1 - Can & Hose
    6. Westle - Can & Hose
    7. J B - Can & Hose
    8. The Doctor - Can & Hose
    9. S3-Chris - Can & Hose
    10. jonny87 - Can & Hose

    Imteyaz, if you pm me as you receive each hose payment (cleared funds), I will keep editing this post, rather than copying and pasting each time for an update.
    Last edited by OllieH; 11th March 2010 at 16:44.
    2003 Dolphin Grey S3, with a few mods....

  10. #89
    Imteyaz's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Oct 2008
    Location
    Warwickshire
    Posts
    524
    I've just paid a visit to the hose suppliers and managed to get a sample so that we can get an idea of what we're using. The hose itself is quite thick, looks just like normal coolant hose but on closer inspection you can see that the inner wall is made from a slightly different material:





    I got a jubilee clip to go over it and found the size to be 27mm diameter, we're gonna need a few of them!

    As soon as everybody has paid up, I'll place the order and the suppliers have kindly offered to cut the hose in equal 2m lengths so it can be bagged and sent recorded delivery to everyone a.s.a.p.

    (do these images need resizing? help.......)
    Imteyaz.

  11. #90
    Westy's Avatar
    Double Dark Side! Diesel & 8P

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Cambridgeshire sometimes Hertfordshire
    Posts
    17,156
    Ollie and Imteyaz, good work lads this is one of the only group buys i've seen go anywhere in my 15 months of being on ASN.

    I'm looking forward to getting this lot fitted
    8P A3 TDI - 220bhp - 335lbft
    A3 Maintenance Thread
    Bye bye S3 you will be missed.
    S3 Build Thread







  12. #91
    vRshafz's Avatar
    Reverse Gear

    Status
    Offline
    Join Date
    Mar 2010
    Location
    Coventry
    Posts
    13
    Hi guys, i came across this page on google while trying to source a catchtank with 19mm inlet/outlet
    i knew im a newb but can i be added to the list (hope its not too late) as i need a catch tank and this one is the best one to get...and its at an attractive price
    Im from Coventry and drive an Octavia vRS, and i have the dreaded 17705 error code, upon inspection I found the breather hoses have perished

  13. #92
    Neutral

    Status
    Offline
    Join Date
    Oct 2008
    Location
    Sunny Suffolk
    Posts
    69
    Hi Guys

    sorry for the lateness,

    11. BigD-a3tq Tank+Hose

    If still available? if so please PM and i'll do a bank transfer. Nice1!

  14. #93
    2nd Gear

    Status
    Offline
    Join Date
    Aug 2009
    Location
    Gosport, Hants
    Posts
    367
    Quote Originally Posted by vRshafz View Post
    Hi guys, i came across this page on google while trying to source a catchtank with 19mm inlet/outlet
    i knew im a newb but can i be added to the list (hope its not too late) as i need a catch tank and this one is the best one to get...and its at an attractive price
    Im from Coventry and drive an Octavia vRS, and i have the dreaded 17705 error code, upon inspection I found the breather hoses have perished
    No problems, have not made the order yet. Please can you make the payments asap though, as I want to get the order made asap. Will add you to the list. PM'd also.

    Quote Originally Posted by BigD-a3tq View Post
    Hi Guys

    sorry for the lateness,

    11. BigD-a3tq Tank+Hose

    If still available? if so please PM and i'll do a bank transfer. Nice1!

    Yep, no problems. Will add you to the list. As above though, payments to me and Imteyaz asap so we can make the order. Cheers.
    2003 Dolphin Grey S3, with a few mods....

  15. #94
    Westy's Avatar
    Double Dark Side! Diesel & 8P

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Cambridgeshire sometimes Hertfordshire
    Posts
    17,156
    Ollie do you think its worth putting a deadline date to this group buy incase we keep getting the odd person every few days show their interest and slow down the process.

    This isn't aimed at the two guys who have just signed up as I only showed my interest yesterday, but just a thought.
    8P A3 TDI - 220bhp - 335lbft
    A3 Maintenance Thread
    Bye bye S3 you will be missed.
    S3 Build Thread







  16. #95
    2nd Gear

    Status
    Offline
    Join Date
    Aug 2009
    Location
    Gosport, Hants
    Posts
    367
    Quote Originally Posted by Westle View Post
    Ollie do you think its worth putting a deadline date to this group buy incase we keep getting the odd person every few days show their interest and slow down the process.

    This isn't aimed at the two guys who have just signed up as I only showed my interest yesterday, but just a thought.
    Yep, this is a good idea. I will make the deadline Saturday. This is mainly because I've not heard anything from S3-Chris yet, despite pm'ing him. It may just be that he's busy with work and will look at his pm's tonight or tomorrow morning, so I want to give him the benefit of the doubt
    2003 Dolphin Grey S3, with a few mods....

  17. #96
    vRshafz's Avatar
    Reverse Gear

    Status
    Offline
    Join Date
    Mar 2010
    Location
    Coventry
    Posts
    13
    Just paid up

  18. #97
    vRshafz's Avatar
    Reverse Gear

    Status
    Offline
    Join Date
    Mar 2010
    Location
    Coventry
    Posts
    13
    p.s. remember to get plenty of hose clips

    guide here
    http://www.pimpmyskoda.co.uk/V2Image...ilCatchCan.htm

  19. #98
    Imteyaz's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Oct 2008
    Location
    Warwickshire
    Posts
    524
    Looks like the pimpmyskoda link utilises the majority of spaghetti pipework that sits under the inlet manifold (suction jet pump / one way valve etc). I think I'm gonna go for the tuffty-stylie version and rip out as much junk as possible, blanking off any remaining ports as a result.

    Similar to this: http://uk-mkivs.net/forums/t/269734.aspx?PageIndex=1

    Then, next step - junk the SAI.

    Job done, well almost, the list is always updated with another job to do...
    Imteyaz.

  20. #99
    1animal1's Avatar
    The Clar!! it mouves!!!

    Status
    Offline
    Join Date
    Dec 2007
    Location
    Sheffield
    Posts
    9,985
    ive decided to keep the SAI and just cut the pipework to the air box and put a 'vent to atmosphere' filter head down in front of the alternator, gets rid of the spag and keeps the SAI for the job its intended for
    Xbox 360 gamer ID : Timffy

    Black FZ6 - Turbo car 'slapper'
    Silver BMW 535D Tourer - Fully loaded 340BHP 700NM torque
    2009 8P3 S3 Brilliant Red - Sold
    2001 F/L S3 Dolphin Grey - Sold
    1999 Pre F/L Silver A3 1.8T - Sold

  21. #100
    vRshafz's Avatar
    Reverse Gear

    Status
    Offline
    Join Date
    Mar 2010
    Location
    Coventry
    Posts
    13
    Quote Originally Posted by Imteyaz View Post
    Looks like the pimpmyskoda link utilises the majority of spaghetti pipework that sits under the inlet manifold (suction jet pump / one way valve etc). I think I'm gonna go for the tuffty-stylie version and rip out as much junk as possible, blanking off any remaining ports as a result.

    Similar to this: http://uk-mkivs.net/forums/t/269734.aspx?PageIndex=1

    Then, next step - junk the SAI.

    Job done, well almost, the list is always updated with another job to do...
    Let me know how you get on with that...im 50/50 whether to go the whole hog or just do a simple install
    guess il fit it, clear error codes and see if it comes back again
    Last edited by vRshafz; 12th March 2010 at 18:10.

  22. #101
    2nd Gear

    Status
    Offline
    Join Date
    Aug 2009
    Location
    Gosport, Hants
    Posts
    367
    Gonna do exactly as the uk-mkiv's thread and get rid of all the vacuum lines and suction jet pump under the manifold, and blank the port. The brake servo will be its own independant line coming from the side of the inlet manifold. The only thing that I will keep from the current setup is the PRV which I will use to regulate the airflow through the catch can when the turbo is boosting.
    2003 Dolphin Grey S3, with a few mods....

  23. #102
    2nd Gear

    Status
    Offline
    Join Date
    Aug 2009
    Location
    Gosport, Hants
    Posts
    367
    1. OllieH - Can & Hose
    2. Imteyaz - Can x 2
    3. Speedy Steve - Can & Hose
    4. Morgan-VAGCHECK - Can & Hose
    5. 1Animal1 - Can & Hose
    6. Westle - Can & Hose
    7. J B - Can & Hose
    8. The Doctor - Can & Hose
    9. S3-Chris - Can & Hose
    10. jonny87 - Can & Hose
    11.BigD-a3tq - Can & Hose
    12. vRshafz - Can
    Last edited by OllieH; 13th March 2010 at 09:46.
    2003 Dolphin Grey S3, with a few mods....

  24. #103
    The Doctor's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Jul 2009
    Location
    Planet Earth
    Posts
    1,175
    Hi guys, I have transferred the money, just waiting for it to appear in your bank accounts. Natiowide website advised it would take approx 3 working days to appear, so should be there on Monday. Sorry for the delay.

  25. #104
    Westy's Avatar
    Double Dark Side! Diesel & 8P

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Cambridgeshire sometimes Hertfordshire
    Posts
    17,156
    I'm with nationwide too and they do seem to be a little bit slower than other banks when transferring money. Money has definitely left my pocket and should be with you Monday too.
    8P A3 TDI - 220bhp - 335lbft
    A3 Maintenance Thread
    Bye bye S3 you will be missed.
    S3 Build Thread







  26. #105
    Imteyaz's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Oct 2008
    Location
    Warwickshire
    Posts
    524
    Thanks to The Doctor & Westle, PM's sent.
    Imteyaz.

  27. #106
    2nd Gear

    Status
    Offline
    Join Date
    Aug 2009
    Location
    Gosport, Hants
    Posts
    367
    Quote Originally Posted by The Doctor View Post
    Hi guys, I have transferred the money, just waiting for it to appear in your bank accounts. Natiowide website advised it would take approx 3 working days to appear, so should be there on Monday. Sorry for the delay.
    Quote Originally Posted by Westle View Post
    I'm with nationwide too and they do seem to be a little bit slower than other banks when transferring money. Money has definitely left my pocket and should be with you Monday too.
    Cheers guys. We're just waiting on S3-Chris now, who I haven't heard from, so if anyone knows his number and fancies contacting him to let him know, please do.

    Edit: I've just checked his profile and he was last on ASN 2 hours ago! I'll give him to the end of today to pay, after that he's dipped out, as I'll be ordering Monday.
    Last edited by OllieH; 13th March 2010 at 09:52.
    2003 Dolphin Grey S3, with a few mods....

  28. #107
    S3-Chris's Avatar
    3rd S3 now... Cant stay away!

    Status
    Offline
    Join Date
    Nov 2007
    Location
    Glasgow
    Posts
    229
    Quote Originally Posted by OllieH View Post
    Cheers guys. We're just waiting on S3-Chris now, who I haven't heard from, so if anyone knows his number and fancies contacting him to let him know, please do.

    Edit: I've just checked his profile and he was last on ASN 2 hours ago! I'll give him to the end of today to pay, after that he's dipped out, as I'll be ordering Monday.
    Sorry Ollie - Gonna ned to give it a miss mate - my clutch has just gone - looking for donations to fix it LOL

    Sorry mate - been on reading up on clutch issues.

  29. #108
    1animal1's Avatar
    The Clar!! it mouves!!!

    Status
    Offline
    Join Date
    Dec 2007
    Location
    Sheffield
    Posts
    9,985
    Chris theres a good chance me and my neighbour are gonna end up ordering one of these each - my misus is the test pilot

    will keep you in on that when/if we decide to do
    Xbox 360 gamer ID : Timffy

    Black FZ6 - Turbo car 'slapper'
    Silver BMW 535D Tourer - Fully loaded 340BHP 700NM torque
    2009 8P3 S3 Brilliant Red - Sold
    2001 F/L S3 Dolphin Grey - Sold
    1999 Pre F/L Silver A3 1.8T - Sold

  30. #109
    2nd Gear

    Status
    Offline
    Join Date
    Aug 2009
    Location
    Gosport, Hants
    Posts
    367
    Quote Originally Posted by S3-Chris View Post
    Sorry Ollie - Gonna ned to give it a miss mate - my clutch has just gone - looking for donations to fix it LOL

    Sorry mate - been on reading up on clutch issues.

    Ok, no problems, will take you off the list. Sorry to hear about your clutch.
    2003 Dolphin Grey S3, with a few mods....

  31. #110
    2nd Gear

    Status
    Offline
    Join Date
    Aug 2009
    Location
    Gosport, Hants
    Posts
    367
    Ok folks, this is the final list. I will make the order Monday and keep you all updated on the progress. Expect the lead time on these to be a few weeks, as it's quite a big order.

    1. OllieH - Can & Hose
    2. Imteyaz - Can x 2
    3. Speedy Steve - Can & Hose
    4. Morgan-VAGCHECK - Can & Hose
    5. 1Animal1 - Can & Hose
    6. Westle - Can & Hose
    7. J B - Can & Hose
    8. The Doctor - Can & Hose
    9. jonny87 - Can & Hose
    10.BigD-a3tq - Can & Hose
    11. vRshafz - Can


    2003 Dolphin Grey S3, with a few mods....

  32. #111
    2nd Gear

    Status
    Offline
    Join Date
    Aug 2009
    Location
    Gosport, Hants
    Posts
    367
    UPDATE:

    All payments now received, thankyou.

    Got an email back today from Saikoumichi with their payment details, and have just sent $1092 through paypal. This works out as Ł746.49 as unfortunately the exchange rate through paypal wasn't as good as the google rate I worked everything out with, (which would have been Ł725!). They estimate about 10-12 days to ship but will try to beat that, so should be with me within 3 weeks hopefully, depending if there are any problems with customs.
    Last edited by OllieH; 16th March 2010 at 14:22.
    2003 Dolphin Grey S3, with a few mods....

  33. #112
    Imteyaz's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Oct 2008
    Location
    Warwickshire
    Posts
    524
    As above, thanks to all those on the list who have paid.

    As soon as I can get the time, I will pay a visit to collect the hoses, the T-pieces and the hose will then be posted out to all as soon as possible! I'll post up on here as soon as they have been posted out so that you can keep an eye out for it!
    Imteyaz.

  34. #113
    vRshafz's Avatar
    Reverse Gear

    Status
    Offline
    Join Date
    Mar 2010
    Location
    Coventry
    Posts
    13
    Big Thanks to OllieH and Imteyaz for sorting this out :D
    Ollie if you need a few extra quid to cover costs, id be more then happy to chip in so your not out of pocket

  35. #114
    Imteyaz's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Oct 2008
    Location
    Warwickshire
    Posts
    524
    Update: Oil Hose ordered and paid for (they will cut it into 2m lengths so I don't have to, trust me, you wouldn't want me to.....)
    Hose will be collected on Friday / Saturday (dependent on how quickly I can get away from work).
    Hose and T-pieces will be posted out soon afterwards!

    Time to get some 27mm OD jubilee clips ready guys, we would need around 8 in total(?).
    Imteyaz.

  36. #115
    Neutral

    Status
    Offline
    Join Date
    Oct 2008
    Location
    Sunny Suffolk
    Posts
    69
    Quote Originally Posted by vRshafz View Post
    Big Thanks to OllieH and Imteyaz for sorting this out :D
    Ollie if you need a few extra quid to cover costs, id be more then happy to chip in so your not out of pocket
    Likewise, if you need a few more sheckles let me know!

  37. #116
    5th Gear

    Status
    Offline
    Join Date
    Sep 2009
    Location
    worcester
    Posts
    1,097
    big thanks to you two guys for sorting this out, much appreciated by all im sure

    as the others say, if you need more monies to cover the exchange rate ollie, give us a shout

    on another note, is it just me confused by the how to guide linked in the first post by ollie, i appreciate its not on an s3 but the principles should be similar? prehaps all will become clear once its in front of me and ive ripped half my pipework out the bay lol

  38. #117
    vRshafz's Avatar
    Reverse Gear

    Status
    Offline
    Join Date
    Mar 2010
    Location
    Coventry
    Posts
    13
    if you dont want to get rid most of the hoses and want a simple install then im sure this guide will be ok
    http://www.pimpmyskoda.co.uk/V2Image...ilCatchCan.htm
    engine - AUQ but im sure same on all the 20vt engines

  39. #118
    1animal1's Avatar
    The Clar!! it mouves!!!

    Status
    Offline
    Join Date
    Dec 2007
    Location
    Sheffield
    Posts
    9,985
    does anyone know what size hose the chap on the vortex post used to convert the brake vacuum pipe and get rid of the nylon thread.....also need some 3/8 ID hose to blank the manifold off from beneath....
    Xbox 360 gamer ID : Timffy

    Black FZ6 - Turbo car 'slapper'
    Silver BMW 535D Tourer - Fully loaded 340BHP 700NM torque
    2009 8P3 S3 Brilliant Red - Sold
    2001 F/L S3 Dolphin Grey - Sold
    1999 Pre F/L Silver A3 1.8T - Sold

  40. #119
    Imteyaz's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Oct 2008
    Location
    Warwickshire
    Posts
    524
    Brake vacuum pipe is 1/2" dia according to the link from UKMKIV's.
    Pat who did the write up mentions using a 1/2" piece of nylon rod to block the port (that is what your asking isn't it or should I go back to sleep?

    "I'm also wanting to cap the brake booster line and just use the 1 vac source for brakes. It works on the AGU and ARZ so no reason it shouldn't work on an AUM right? I used a 1/2" piece of nylon rod and a jubilee clip but have since replaced this section of the brake booster line. Picture of revised piece to be edited in later"

    Imteyaz.

  41. #120
    1animal1's Avatar
    The Clar!! it mouves!!!

    Status
    Offline
    Join Date
    Dec 2007
    Location
    Sheffield
    Posts
    9,985
    na mate i need to get myself an attention span

    will source some of this ready for the install
    Xbox 360 gamer ID : Timffy

    Black FZ6 - Turbo car 'slapper'
    Silver BMW 535D Tourer - Fully loaded 340BHP 700NM torque
    2009 8P3 S3 Brilliant Red - Sold
    2001 F/L S3 Dolphin Grey - Sold
    1999 Pre F/L Silver A3 1.8T - Sold

 

 
Page 3 of 15 FirstFirst 1234567891013 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO