Add gauges

[kachnak]

Hello,
I am thinking about add some gauges to A shaft (between left door and front glass) I have driving wheel on left, but I have some questions before. I cannot find here thread what I want about instaling gauges and sensors.
Boost tube I have already instaled, but do you know if is easy to instal sensors for OIL temperature and OIL pressure (are here some instruction to do this?) If is so hard I only put there boost gauge.
Thank you

 

[kachnak]

in some tuning forum I read that this oil sensors can be placed to the oil tube which is going to turbo. What is your opinion?

 

[S3 Paul]

Hi there,
The boost gauge will need an ignition live and earth for the light in the gauge,
I think there is a blanking plug in the oil filter housing you can remove and fit an oil preasure sensor into.
As for the oil temperature im not sure and i havent found a thread on here where this has been done,

 

[Dani_B19]

Can plug the oil temp gauge in the same place, theres also the sump plug too, alot of people replace the sump plug with a sender.

Covered loads on SCN paul.