I know there are loads of threads on how to reprogram your key when you have 2 or more workings keys, but if you only have one key, and that key needs reporgramming what do you do.
Well i just tried it and it worked.
1. Get in the car, wind the drivers window down.
2. start the car - or go to the on position (i had to start it to stop the alarm going off after getting in using the key in the door)
3. take the key out and lock the door by turning it in the lock (while sitting in the car)
4. press the unlock button once
5. wait 5 seconds press unlock again
6. then press lock
7. take the key out the lock and it should now work.
just thought i would let everyone know incase you ever have any problems.
hope this helps
Well i just tried it and it worked.
1. Get in the car, wind the drivers window down.
2. start the car - or go to the on position (i had to start it to stop the alarm going off after getting in using the key in the door)
3. take the key out and lock the door by turning it in the lock (while sitting in the car)
4. press the unlock button once
5. wait 5 seconds press unlock again
6. then press lock
7. take the key out the lock and it should now work.
just thought i would let everyone know incase you ever have any problems.
hope this helps