Does anyone know if it is possible to have a FMIC and use the two standard fit Inter coolers. or is there a reason for removing the two standard inter coolers when fitting a FMIC ???
Does anyone know if it is possible to have a FMIC and use the two standard fit Inter coolers. or is there a reason for removing the two standard inter coolers when fitting a FMIC ???
Can't see why you would want to when a decent FMIC exceeds the capabilities of the SMICs. Keeping them introduces more potential for boost leaks, possible pressure drop, increased lag and pipework would be pretty tight to connect it all together.
What turbo/power you planning on running? If you are using a K04 with a stage 1 remap then a Forge/AH Fabs/eBay cooler will do a much better job than the SMICs as the K04 will generate much more heat the more boost you try and use with it...
On certain big turbo combos its entirely possible to use the SMICs as the turbo would be running less boost to produce more power and thus less heat unless you really go to town and have all the engine mods and run much higher boost of course.
Ess_Three ran a modified single side mount with his front mount but there was no real measurable advantage over running this combo over just the FMIC.
No real advantage...and the piping is a bit small.
What you can do though, is use the space that the standard SMIC and pipework used to need, to fit a 100mm duct into the airbox, from the high pressure area behind the bumper where the SMIC used to sit.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.