URGENT HELP NEEDED! brakes have jammed

[zeeeebo]

ok so i thought i would treat my audi to some new disks allround and also mend the abs sensor! got the abs sensor in then put the disk on. now i couldnt fit the caliper on and someone told me to twist the piston till it shrunk so i could fit it on. with a bit of twisting and hammering i got the caliper on and screwed all the bolts in..... now the brake is fully on and the wheel wont move at al!!! and i have work at 8! im screwed!


any help would be very helpful

 

[Broken Byzan]

You need to remove the offending claiper ( assuming rear) and screw and push some more. Did yoy use a proper brake piston retracting tool or similar? As some other methods cause problems.

 

[zeeeebo]

no me being really daft didnt realize it was a turning one so got a wrench and twisted it! as i was running out of daylight! and what has annoyed me more is the abs sensor is still not working!

 

[zeeeebo]

getting the proper tool tonigh so will let your know how it goes!