Maf readings

[Pinola]

Are the readings ok for my maf? I have a fault code on my ECU

17544 - Fuel Trim: Bank 1 (Add): System too Lean
P1136 - 35-00 - -

it's an AMK engine 210bhp

Dan

 

[Haglos]

yes that looks ok had my maf read on saturday and they said it was only pushing 110g/s when it should be 170g/s so yours does seem right

 

[S3 Nattie]

Ye they seem good. 170 g/s is about 212 bhp so yours is roughly 227 bhp.
Divide your MAF readings by 0.8 to get bhp.

 

[Pinola]

227bhp as far as i know the car is standard 210bhp only had it since wednesday looks all standard however today i have noticed the air box has been drilled is there a way i can find out if it's been re mapped?

 

[Pinola]

anyone know how i can find out or is the only way to put it on R/R

 

[MintyS3]

Mappers can usually tell if theres allready software flashed onto the ecu. Not sure about normal garages.

 

[Essflee]

Judging by your maf readings Id guess your car hasn't been remapped unless you have a dodgy maf as you would be seeing around 200g/s + with most maps...

 

[Pinola]

is it a high reading for a standard 210bhp s3

 

[Haglos]

for the 210 s3 which i have it is 170g/s