Sky InsuranceChris Nott
Results 1 to 2 of 2
  1. #1
    Reverse Gear

    Status
    Offline
    Join Date
    Feb 2009
    Posts
    1

    Removing Rear S3 Bumper

    Could anybody let me know how to remove the rear bumper on my 2002 S3, so I can get it repaired and if it is possible to get a Workshop Manual for S3? Any help would be much appreciated.

  2. # ADS
    ADS
    Join Date
    Always
    Posts
    Many
     
  3. #2
    S3Steve's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Sep 2005
    Location
    Peterborough
    Posts
    1,588
    Its just an easy unbolt job, all the bolts are torx bolts (T20 iirc). First you need to remove the bolts in the rear wheel arches theres 6 each side. Then remove the two bolts on the bottom of the bumper (ones easily seen the other is hidden by the tailpipes). Next undo the boot, you need to remove the plastic trim between the boot and bumper, this is done by undoing the torx bolts first one each side to the side of the rear lights, once undone lift the plastic trim away (this is velcro and sealed down so will take a little effort to lift/remove). Once removed you can see the last three bolts, remove these then the bumper will pull off.
    2007 A3 TDI 170 S Line
    Sold - 2002 S3

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO