Yup, they'll fit...
But, beware of what size spacers you run at the front.
If you NEED to run spacers to clear the brakes for example, and run a lot lower than standard, you may be close to rubbing, or rubbing with 8.5" wide ET35 wheels and 10mm spacers.
I reckon you should just be Ok...but 15/16mm spacers will most likely cause rubbing.
Ok, what's the strut on the inside? I wanna know how these wheels will sit in the archs and how it'll change handeling. Do u know if it'll damage the strut on the inside? only reason I'm after these wheels is because I've seen them on another S3, but can't get hold of the exact rim spec.
It's the suspension strut you'll be gettin close to. Have a look at the link FactionOne posted, that'll show you how the wheel sits in the arch. As for a change in handling, thats also dependant on wheel weight, offset, width, size, and so on.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.