I uprated my clutch in june to a MkII Gold G60 one (the VR6 doesn't fit), it's a direct replacement, though make sure you use G60 bolts on refitting. It handles up to 300bhp, so plenty good!! [
] no problems so far!!
Andy
] no problems so far!!Andy
Hi Mate
We do these.
The G60 is a single mass flywheel , this is slightly lighter than the dual mass one.
We do 2 one with the sachs clutch which is almost standard or a little better £320.00 + VAT this is for the whole kit and includes EVERY bolt that you need.
We also do the uprated one with the Helix £488.07 + VAT and again this includes every bolt that is required and ALL include the flywheel too
If anything you will notice a slight vibration in neutral
Sarah
We do these.
The G60 is a single mass flywheel , this is slightly lighter than the dual mass one.
We do 2 one with the sachs clutch which is almost standard or a little better £320.00 + VAT this is for the whole kit and includes EVERY bolt that you need.
We also do the uprated one with the Helix £488.07 + VAT and again this includes every bolt that is required and ALL include the flywheel too
If anything you will notice a slight vibration in neutral
Sarah
I got mine from GSF, it's a SACHS item, for £135+p&p, plus a G60 single mass flywheel. I was already set on getting a better clutch but didn't fancy Jabba's option of £6-700, and knew that the G60 flywheel would go on, but after speaking to Dean at Awesome, he assured me it was a direct replacement.
Cheers Dean!
Andy
Cheers Dean!
Andy
