agu head new logs look ok?

darren t · Nov 30, 2013

so finally after hitting overboost overboost overboost after fitting a large port agu cylinderhead i adjusted actuator preload a turn and done some logs fuel is where im worried????no more overboost!3rd gear 4th and 5th>>>

Saturday

30

November

2013

16:50:46:10074

VCDS Version: Release 10.6.4

Data version: 20110418

8N0 906 018 BH

1.8L R4/5VT G01 0001

Group A:

'003

Group B:

'115

Group C:

'031

RPM

Mass Flow

Load

Ign. Timing

RPM

Load

Absolute Pres.

Lambda Factor

Bin. Bits

TIME

Marker

STAMP

/min

g/s

%

Â°BTDC

STAMP

/min

%

mbar

STAMP

14.67	3120	154.81	100	4.5	14.07	2800	131.6	2440	1460	14.37	0.875	0.914
15.58	3880	186.72	100	12.8	14.98	3360	191.7	2380	2540	15.28	0.875	0.852
16.49	4640	211.19	100	9.8	15.88	4160	191.7	2350	2540	16.18	0.821	0.836
17.39	5320	228.47	100	10.5	16.79	4880	191.7	2370	2540	17.09	0.805	0.821
18.29	5840	234.33	100	15.8	17.69	5520	191.7	2400	2430	17.99	0.813	0.805
19.2	6160	33.75	10.2	-4.5	18.59	6040	191.7	2340	2310	18.9	0.805	0.797

20.1	4720	136.11	98.4	12.8	19.5	5520	12	1010	1500	19.8	0.836	0.875
21.01	5000	220.14	100	11.3	20.41	4800	191.7	2320	2170	20.71	0.758	0.844
21.91	5320	229.39	99.6	9.8	21.31	5080	191.7	2340	2480	21.61	0.813	0.821
22.82	5560	231.39	93.3	12	22.22	5400	191.7	2360	2440	22.52	0.813	0.813

43.74	4520	209.03	100	9	43.13	4360	156.4	2050	1610	43.44	0.914	0.953
44.64	4840	212.92	100	10.5	44.04	4640	191.7	2370	2540	44.34	0.844	0.844
45.55	5160	227.25	100	16.5	44.95	4960	191.7	2350	2540	45.25	0.828	0.821
46.46	5440	231.81	100	9.8	45.85	5240	191.7	2350	2470	46.15	0.797	0.813
47.36	5680	234.72	100	15.8	46.76	5520	191.7	2370	2430	47.06	0.805	0.766
48.27	5880	235.44	100	14.3	47.66	5760	191.7	2340	2380	47.96	0.805	0.649

beachbuggy · Nov 30, 2013

darren t said:
so finally after hitting overboost overboost overboost after fitting a large port agu cylinderhead i adjusted actuator preload a turn and done some logs fuel is where im worried????no more overboost!3rd gear 4th and 5th>>>

Saturday 30 November 2013 16:50:46:10074 VCDS Version: Release 10.6.4 Data version: 20110418
8N0 906 018 BH 1.8L R4/5VT G01 0001
Group A: '003 Group B: '115 Group C: '031
RPM Mass Flow Load Ign. Timing RPM Load Absolute Pres. Absolute Pres. Lambda Factor Lambda Factor Bin. Bits Bin. Bits
TIME TIME TIME
Marker STAMP /min g/s % Â°BTDC STAMP /min % mbar mbar STAMP

14.67 3120 154.81 100 4.5 14.07 2800 131.6 2440 1460 14.37 0.875 0.914
15.58 3880 186.72 100 12.8 14.98 3360 191.7 2380 2540 15.28 0.875 0.852
16.49 4640 211.19 100 9.8 15.88 4160 191.7 2350 2540 16.18 0.821 0.836
17.39 5320 228.47 100 10.5 16.79 4880 191.7 2370 2540 17.09 0.805 0.821
18.29 5840 234.33 100 15.8 17.69 5520 191.7 2400 2430 17.99 0.813 0.805
19.2 6160 33.75 10.2 -4.5 18.59 6040 191.7 2340 2310 18.9 0.805 0.797

20.1 4720 136.11 98.4 12.8 19.5 5520 12 1010 1500 19.8 0.836 0.875
21.01 5000 220.14 100 11.3 20.41 4800 191.7 2320 2170 20.71 0.758 0.844
21.91 5320 229.39 99.6 9.8 21.31 5080 191.7 2340 2480 21.61 0.813 0.821
22.82 5560 231.39 93.3 12 22.22 5400 191.7 2360 2440 22.52 0.813 0.813

43.74 4520 209.03 100 9 43.13 4360 156.4 2050 1610 43.44 0.914 0.953
44.64 4840 212.92 100 10.5 44.04 4640 191.7 2370 2540 44.34 0.844 0.844
45.55 5160 227.25 100 16.5 44.95 4960 191.7 2350 2540 45.25 0.828 0.821
46.46 5440 231.81 100 9.8 45.85 5240 191.7 2350 2470 46.15 0.797 0.813
47.36 5680 234.72 100 15.8 46.76 5520 191.7 2370 2430 47.06 0.805 0.766
48.27 5880 235.44 100 14.3 47.66 5760 191.7 2340 2380 47.96 0.805 0.649

Looks healthy, thy, although timing looks on the low side. You need to log the CF see if it's 0, which I think it will be then you can add some more..

darren t · Nov 30, 2013

quiet impressed considering its a standard k04 housing and stock manifold!i got some pull 3?how much more timing would you add?if i fitted green giant 440cc injectors would i mess up the map completely?and is the first column requested boost or actual?

Saturday	30	November	2013	15:04:32:10074	VCDS Version: Release 10.6.4	Data version: 20110418
8N0 906 018 BH	1.8L R4/5VT G01 0001

	Group A:	'003				Group B:	'115				Group C:	'020
		RPM	Mass Flow	Load	Ign. Timing	RPM	Load	Absolute Pres.	Absolute Pres.	Idle Stabilization	Idle Stabilization	Idle Stabilization	Idle Stabilization
	TIME					TIME					TIME
Marker	STAMP	/min	g/s	%	Â°BTDC	STAMP	/min	%	mbar	mbar	STAMP	Â°KW	Â°KW	Â°KW	Â°KW
1	244.04	1840	24.58	17.3	25.5	244.35	1760	25.6	1000	1080	243.74	0	0	0	0
	244.96	1680	3.56	2.7	3.8	245.25	1600	15	1000	1020	244.66	0	0	0	0
	245.86	2280	35.86	28.2	26.3	246.17	2320	92.5	1560	1110	245.55	0	0	0	0
	246.77	2520	67.14	94.9	17.3	247.07	2600	142.9	2430	1630	246.47	0	0	0	0
	247.67	2880	129.36	98.4	3.8	247.97	3080	191.7	2380	2540	247.37	0	0	0	0
	248.58	3560	176.81	100	7.5	248.88	3760	191.7	2300	2540	248.28	0	0	0	0
	249.49	4240	198.06	100	8.3	249.79	4440	191.7	2370	2540	249.17	0	0	3	0
	250.39	4800	214.06	100	15	250.69	4960	191.7	2350	2540	250.09	0	0	3	0
	251.3	5280	224.14	91.4	13.5	251.6	5120	23.3	1000	2320	250.99	3	0	3	0
	252.19	4120	3.08	5.5	3.8	252.5	3760	12.8	1000	1110	251.9	0	0	0	0
	253.11	3480	6.44	5.5	3	253.4	3360	12	1000	1040	252.81	0	0	0	0
	254	3200	7.5	5.1	3	254.3	3160	12	1000	1030	253.71	0	0	0	0
	254.92	3080	6.97	5.1	3	255.21	3040	12	1000	1020	254.61	0	0	0	0
	255.82	2960	6.94	5.1	2.3	256.12	2880	12	1000	1020	255.52	0	0	0	0
	256.73	2800	6.47	4.7	2.3	257.02	2760	12	1000	1020	256.42	0	0	0	0
	257.62	2560	5.94	4.3	1.5	257.92	2440	11.3	1000	1020	257.33	0	0	0	0
2	258.53	2240	5.14	3.5	-0.8	258.83	2120	12	1000	1010	258.24	0	0	0	0
	259.43	1360	3.08	2	-7.5	259.74	1000	21.1	1000	1000	259.14	0	0	0	0
	260.34	1080	3.14	2	-8.3	260.64	1280	12.8	1000	1000	260.04	0	0	0	0
	261.24	1680	4.5	3.1	-6.8	261.55	1680	12.8	1000	1000	260.95	0	0	0	0
	262.15	1560	16.53	11.4	9.8	262.45	1560	59.4	1000	1000	261.86	0	0	0	0
	263.05	1600	20.92	15.7	21	263.37	1600	65.4	1000	1070	262.75	0.8	0	0	0.8
	263.97	1680	20.36	15.3	23.3	264.27	1760	64.7	1000	1110	263.66	0.8	0	0	0.8
	264.87	1840	22.92	14.9	24	265.19	1880	62.4	1000	1140	264.57	0.8	0	0	0.8
	265.78	1960	23.17	14.1	25.5	266.07	2040	59.4	1000	1140	265.48	0.8	0	0	0.8
	266.68	2120	26.78	15.7	27	266.99	2200	66.9	1000	1170	266.38	0.8	0	0	0.8
	290.22	1440	18.58	13.7	7.5	290.52	1440	60.9	1000	1020	289.92	0	0	0	0
	291.11	1480	18.17	13.7	22.5	291.41	1480	66.9	1000	1070	290.82	0	0	0	0

darren t · Dec 1, 2013

So from what I can gather my injectors are maxed out?and stock manifold/turbo =235.4gs that a new record??no porting standard bam manifold and injectors 3bar fpr.......; I have a 4 bar and a set of 440 cc green giant injectors should I fit the regulator for now until I get it custom mapped?
Or will I get away with putting injectors in without messing my map up?

Search

Search

agu head new logs look ok?

darren t

Registered User

beachbuggy

Registered User

darren t

Registered User

darren t

Registered User

Similar threads