Hi all
Now I have the S3 running well and making plenty of power, I thought I'd like a boost gauge
Trouble is, I have no idea how to remove the trim on the pillar without damaging it and and worried it will not fit back properly when I'm done!
I am aiming for this
http://i84.photobucket.com/albums/k30/tufftybloke/Random/Car/S3/Build/20100213_IMG_4007.jpg
So:
How does one remove the trim piece (photos please)
Could I do it without removing the trim. if so, where do i cut holes for the pipe and how will i hit the right position on the metal underneath the trim for the pipe and wires? (attaching the pod with the trim in place is not an issue)
Appreciate a photo of the metalwork with the trim removed if possible too
thanks all
Now I have the S3 running well and making plenty of power, I thought I'd like a boost gauge
Trouble is, I have no idea how to remove the trim on the pillar without damaging it and and worried it will not fit back properly when I'm done!
I am aiming for this
http://i84.photobucket.com/albums/k30/tufftybloke/Random/Car/S3/Build/20100213_IMG_4007.jpg
So:
How does one remove the trim piece (photos please)
Could I do it without removing the trim. if so, where do i cut holes for the pipe and how will i hit the right position on the metal underneath the trim for the pipe and wires? (attaching the pod with the trim in place is not an issue)
Appreciate a photo of the metalwork with the trim removed if possible too
thanks all