andy1571
Registered User
Hi evryone,
Im new to the forum and 2 weeks ago i bought my very first Audi, a 1999 APY 8L and i absolutely love the thing despite having half of it in bits atm due to a suspected pcv valve failure and overheating problem.
I decided almost instantly that i was going to mod it but after the problem with the overheating, split hoses blah blah i decided to start at the block and found this on ebay
Im new to the forum and 2 weeks ago i bought my very first Audi, a 1999 APY 8L and i absolutely love the thing despite having half of it in bits atm due to a suspected pcv valve failure and overheating problem.
I decided almost instantly that i was going to mod it but after the problem with the overheating, split hoses blah blah i decided to start at the block and found this on ebay
500bhp ready 1.8 20v Turbo Engine Tested
PARTS PUT INTO THE ENIGNE.....
- Omega 82.5mm pistons
- Pec con rods
- SPA Manifold
- GT3076r Turbo from America no Jap or Chinese S***
- External Wastegate
- Ferrea Exhaust Valves
- AYP Block 1.9
- AUQ New Head
- New Cam-belt fitted
Thing is im a complete beginner with regards to mechanics and modification, i know im going to need front mount inter cooler, manifold modification and i want to replace all the hoses, bushes anti roll bars ect with new or uprated ones during the build, i realize ive probably bitten off way more than i can chew so here i am to humbly ask more seasoned and knowledgeable audi owners for any advice they may have to offer, Thanks in advance evryone
PARTS PUT INTO THE ENIGNE.....
- Omega 82.5mm pistons
- Pec con rods
- SPA Manifold
- GT3076r Turbo from America no Jap or Chinese S***
- External Wastegate
- Ferrea Exhaust Valves
- AYP Block 1.9
- AUQ New Head
- New Cam-belt fitted