Rod bearings

[IrishDave]

What do you suggest? Oversized rod bearings or standard.

 

[<tuffty/>]

Why would you use over size? only need that if the crank has been reground... stick to std size bearings if doing a straight swap..

<tuffty/>

 

[badger5]

if you mean additional clearance ones, eg +0.001" then I would only use these on big power 450-500bhp+ applications.. where you might want to run a smidge more clearance.. Badgerwage runs +0.001" for example, but I dont use them on normal bt builds.. sub these power levels.

as opposed oversize which is as tufftys says a regrind type thing re crank etc.

 

[IrishDave]

Should have been clearer. Additional clearance is what I meant. Thanks for the info.

 

[Broken Byzan]

Additonal only on high power free revving race engines IMHO