Another problem with a3

[John2708]

So I changed my trailing arm bushes and since doing this ESP light stays on any ideas on how it fix this thanks for any help given cheers John

 

[phil miller]

what codes have you got mate? have you made sure both ABS sensors are fully connected?

 

[John2708]

No there is no code coming up so you think a loose connection

 

[phil miller]

Yeah i would of thought so dude, you have to re check everything you have done, im sure you will fine a connector not fully connected dude

 

[s3dave]

So I changed my trailing arm bushes and since doing this ESP light stays on any ideas on how it fix this thanks for any help given cheers John

The light is on because you have upset the geometry of the car, get it 4WA and then you will be fine...

Presume you have a quattro?

 

[<tuffty/>]

No there is no code coming up so you think a loose connection

What have you scanned with? generic scanners don't always pick up codes from other modules... you need to use VCDS really and scan ABS module ideally...

If a light is on the dash there will be a fault code recorded in one of the modules...

<tuffty/>