Some WMI questions for the users

[MIGGZ]

Hey guys

Just out of curiosity want to ask some questions for the people using WMI.

* What brand are you using?
* What jet size?
* What mixture do you run?

And for the stage 2 guys...

* What RPM or BOOST pressure does it activate?
* What flow setting?
* Where is the controller box fitted?
* Where is the Bottle fitted?

And pictures of such set ups?

 

[dancupra225]

Before someone says it before I.do
The research button will give you the answers you need

 

[MIGGZ]

Before someone says it before I.do
The research button will give you the answers you need

Mate iv got the answers as I have wmi
I'm just curious as to how everyone runs theirs?
And instead of going thru 40 different post why not make 1 post with 40 different setups?

If I'm wrong in doing this then the mods can delete it.

 

[Westy]

* What brand are you using? AEM kit with a Devils Own solenoid
* What jet size? medium jet
* What mixture do you run? 50/50

And for the stage 2 guys...

* What RPM or BOOST pressure does it activate? Starts at 10psi on the progressive setting then full blast at around 15+. Max pressure of my map is 21psi
* What flow setting?
* Where is the controller box fitted? Box is located in the drivers side cubby hole under the headlight switch
* Where is the Bottle fitted? bottle is screwed to the access panel to the left in the boot that covers the sub/central locking.

And pictures of such set ups?

 

[dancupra225]

Mate iv got the answers as I have wmi
I'm just curious as to how everyone runs theirs?
And instead of going thru 40 different post why not make 1 post with 40 different setups?

If I'm wrong in doing this then the mods can delete it.

Just saying before some guys go crazy

If you don't ask don't get

Im.doing wmi next year as well

 

[badger5]

nozzle comparisons difficult to make across the makes.. Devils Own have DOx designated nozzles which will have some flow rating associated with them... AEM have small, medium, large, but I dont know what that is in flow rate terms

DO ones I have used DO3 nozzles with good effect, and AEM sometimes small, sometimes medium, but smaller seem to work better on the ones I've touched

+ snow performance, + Aquamist

 

[MIGGZ]

Awsome feed back so far! Thanks guys.

I'm running snow stage 2 kit. Jet size is 225ml/min so its for 200whp to 250whp jet

Mine activates from 0.6 bar to full boost which is 1.7bar

My controller sits in the glove box and my bottle sits in the sub panel.
Iv got a green light and red light in my dash panel by the empty spaces in the dash. Green when it sprays and red when the bottle is less then 2/5ths down.

Iv set the nozzle to only spray 40% of the jet capacity

 

[MIGGZ]