[ QUOTE ]
Sorry, would haven't posted earlier. Still recovering from Reading!!
Anyways, I've just trial fitted the facelift vents and they slotted straight in.
The centre vent does indeed need to be fitted a certain way round. The wires on the later vent need to be at the top.
As for the side vents, they are not "sided". The dealer was correct to supply you with two the same. When fitted to the car, both vents have the control on the left hand side.
The part numbers are as follows (for other people)
Side vent (x2) = 8L0 820 901 C
Centre vent = 8L2 820 951
A couple of side notes:
There is a special tool available to remove the vents, but you can make your own. I take a pic and post it later.
The ducts begind the vents need to have a small hole drilled to allow the wiring through. I examined the car I from the breakers, which was like this.
[/ QUOTE ]
I've got two in, but the one I had for the drivers side was defo wrong as it did not fit well. Where as the passenger and the centre fit well (Once the right way round)
Yes I know about the wiring cheers. Well I didn't how they were from the factory, but I drilled some holes for mine like you said.
Any ideas why my drivers one doesn't want to fit then?
Cheers.