What Next

B1GW1L

Registered User
Joined
Sep 2, 2012
Messages
95
Reaction score
0
Points
6
Location
Waterlooville, Nr Portsmouth
Right im stuck on what to do next on my s3

So far i have

Badger5 TIP v2.2
PCV delete
Forge 007p DV
Stage 1 Revo

Im not sure where to go next im having my paint work looked at by audi as i have bubbling on both sides of the rear of the car.

As a small thing im going to led everything internally and externally but im not sure what to do as the next big thing.

Anyone able to point me in the right direction?
 
Make it stop and go round corners.

A haldex controler, a decent set of coilovers or dampers and a set of LCR Brembos. The single piston sliding ****e that comes on an S3 is woefully underpowered for such a heavy car.
 
Depends how much money you have 'spare' to chuck at it mate.

Handling and stopping the heavy barge is a good place to start
 
As above LCR brakes would be a good next step now you have some performance mods on
 
Silicone hose upgrade, suspension, oil catch can?
 
If it's engine mods you're after, I'd say a front mount, followed by a downpipe.

If it's general mods, I'd say the next step would be suspension, followed by brakes.

I've made the mistake before of doing all the engine upgrades without the suspension and brakes, and whilst it's entertaining, it's really a bit ****!
 

Similar threads

H
Replies
11
Views
997
Replies
4
Views
560
Replies
23
Views
2K
Replies
27
Views
1K
Replies
8
Views
828