Hey guys,
I recently carried out a complete 1.6 (AVU) to 1.8 turbo (AUM) engine conversion and all has been going completely fine, except now when I'm finally at pretty much completion, I start the car, it starts fine and idles perfectly but when I try and throttle it doesn't respond at all!
I should note another issue I have is that the fuel pump for some reason has no live to it, I bypassed that temporarily so I can get the car running and fix all the niggles in my own time (as I work full time and ideally need the car running ASAP) and made a connection through the fuse box which means the fuel pump is now working.
Could these two problems be related? is there anything I should be doing to get the throttle working again? I'm going to post up a complete VCDS log from the scans at some point soon but because my laptop isn't with me I can't at the moment. One of the errors that I have got that are actually worrying me is:
01314 - Engine Control Module
013 - Check DTC Memory Intermittent
I'm unsure as to whether this could also be related but I had a guy come over and do an immobiliser bypass as the wiring for the clocks in my car wouldn't fit the clocks from the donor we used (my clock wiring had two plugs, the clocks from the donor engine used has 3)?
If anyone could please give me some advice as to what I can do to get the throttle working I would be extremely grateful!
P.S The T.B is plugged in!
I recently carried out a complete 1.6 (AVU) to 1.8 turbo (AUM) engine conversion and all has been going completely fine, except now when I'm finally at pretty much completion, I start the car, it starts fine and idles perfectly but when I try and throttle it doesn't respond at all!
I should note another issue I have is that the fuel pump for some reason has no live to it, I bypassed that temporarily so I can get the car running and fix all the niggles in my own time (as I work full time and ideally need the car running ASAP) and made a connection through the fuse box which means the fuel pump is now working.
Could these two problems be related? is there anything I should be doing to get the throttle working again? I'm going to post up a complete VCDS log from the scans at some point soon but because my laptop isn't with me I can't at the moment. One of the errors that I have got that are actually worrying me is:
01314 - Engine Control Module
013 - Check DTC Memory Intermittent
I'm unsure as to whether this could also be related but I had a guy come over and do an immobiliser bypass as the wiring for the clocks in my car wouldn't fit the clocks from the donor we used (my clock wiring had two plugs, the clocks from the donor engine used has 3)?
If anyone could please give me some advice as to what I can do to get the throttle working I would be extremely grateful!
P.S The T.B is plugged in!