3rd Gear logs for Chaz20vt - Limp Mode

[badger5]

google ihi on 20vt for the owners who have had reliablity issues on ihi's

 

[chaz20vt]

Couple of logs from tonight

Friday	19	October	2012	23:03:10:10074	VCDS Version: Release 10.6.4	Data version: 20110418
8N0 906 018		1.8L R4 5VT 01 0003
	Group A:	003				Group B:	115				Group C:	020
		RPM	Mass Flow	Load	Ign. Timing		RPM	Load	Absolute Pres.	Absolute Pres.		Idle Stabilization	Idle Stabilization	Idle Stabilization	Idle Stabilization
	TIME					TIME					TIME
Marker	STAMP	/min	g/s	%	°BTDC	STAMP	/min	%	mbar	mbar	STAMP	°KW	°KW	°KW	°KW
	0.59	3400	66.19	27.5	-4.5	0.02	2640	99.2	1320	1240	0.3	0	0	0	0
	1.59	2400	14.83	12.5	33	0.89	3200	14.3	980	1250	1.29	0	0	0	0
	2.49	1600	28.64	76.1	15.8	1.89	1600	88.7	1540	1070	2.19	0	0	0	0
	3.49	1880	37.72	84.3	16.5	2.79	1680	92.5	1640	1170	3.13	0	0	0	0
	4.39	2160	49.08	90.6	15.8	3.79	1960	106	1850	1270	4.1	0	0	0	0
	5.29	2480	67.81	96.5	11.3	4.69	2240	121.8	2060	1440	4.99	0	2.3	0	0
	6.21	2920	105.92	99.2	10.5	5.59	2600	148.1	2230	1740	5.89	0	2.3	0	0
	7.09	3480	141.58	100	7.5	6.49	3080	191.7	2340	2310	6.8	0	3	3	0
	8	4080	161.36	100	8.3	7.39	3720	191.7	2320	2470	7.69	6	6	6	3
	9	4680	174.25	100	9.8	8.3	4280	191.7	2260	2410	8.6	6	8.3	6	2.3
	9.9	5160	184.64	100	10.5	9.31	4840	191.7	2210	2300	9.6	5.3	8.3	5.3	2.3
	10.8	5560	166.19	51	17.3	10.19	5280	184.2	2100	2230	10.5	5.3	8.3	5.3	2.3
	11.7	5920	171.08	42.4	13.5	11.1	5680	154.1	1920	1980	11.4	4.5	7.5	4.5	1.5
	12.7	6240	142.67	35.7	18	12	6000	146.6	1770	2100	12.33	4.5	6.8	4.5	1.5
	13.6	6440	154.58	37.3	22.5	13	6280	112.8	1730	1830	13.3	4.5	6.8	4.5	1.5
	14.5	6640	139.44	37.3	19.5	13.9	6520	118.8	1630	1930	14.2	3.8	5.3	3.8	0.8
	15.43	6840	177.58	100	23.3	14.8	6720	118.8	1630	1770	15.09	3.8	5.3	3.8	0.8
	16.29	6560	0	4.7	20.3	15.69	6920	158.6	1820	2010	16	3.8	5.3	3.8	0.8
	17.2	4960	3.92	3.9	9.8	16.59	6000	7.5	980	1300	16.89	0	0	0	0

 

[badger5]

184g/s looks low for an ihi.. but boost at that point is'nt high... Timing pull seems too high mid range..

 

[chaz20vt]

It's a standard k04 bill not a ihi turbo
With what's ment to be a stage 1 map
I'm just trying to sort the timing pull as there is still a lot

 

[badger5]

oil in charge pipes?

 

[chaz20vt]

No none iv done the PVC delete with a catch can now