Sky InsuranceEM Tuning
Page 2 of 6 FirstFirst 123456 LastLast
Results 41 to 80 of 215
Like Tree12Likes

Thread: Hybrid K04 R&D

  1. #41
    5th Gear

    Status
    Offline
    Join Date
    Aug 2010
    Location
    bradford
    Posts
    1,252
    dan your a star mate youve put so much time into all this work hope it pays off for ya pal.... ill be keeping eye out on this... might just put my car on hole lol for this.
    350bhp & 316ftlb BBT new k16 7+7 blade hybrid turbo, Welly cooler, jetex filter, relentless ported v3 manifold 3" downpipe & de-cat, liquid gauge, r32 rear arb, AGU ported and polished Head, 550cc injectors, kw v2 Coilovers, s3dave tie bars & heat sheild, milltek cat back, I.E forged rods, brembos, inline fuel pump, v3 badger 5 tip, devils own WMI kit, AGU pistons, rear grooved discs & brembo pads, ds2500 pads & EBC ultimax disc, stack boost gauge

  2. # ADS
    ADS
    Join Date
    Always
    Location
    Global
    Posts
    Many
     
  3. #42
    Lemon S3's Avatar
    Alex

    Status
    Offline
    Join Date
    Sep 2009
    Location
    Bicknacre, Essex
    Posts
    1,314
    I wish I could fast forward time so I can see the outcome of this now.

    Good work Dan.

    If you need another guinea pig
    1999 APY S3 Imola Yellow

    PS3: Broady_11

  4. #43
    RIP S3dave

    Status
    Offline
    Join Date
    May 2004
    Location
    nr Glos
    Posts
    7,139
    Quote Originally Posted by StaceyS3 View Post
    Oh thats interesting didn't realise the tial one was that small?

    Did you notice it create much back pressure on the badgerwagon and effect egts compared to the T3?
    its size is what stopped me going tial when I originally went hybrid gt35,..... My previous FP based turbos were 52mm hole also.. I always thought wtf can you get thru that little hole??

    My overall power has not changed.. so it does'nt look to have made any power difference, however the 0.82 tial hotside did spool slower than the garrett T3 0.82 hotside, but I am not sure if thats the turbo itself being slightly damaged. I was'nt expecting more lag. I run fixed duty cycle and the same duty cycles make the same power so in overall flow terms to the level I have run it to so far, not much looks to have changed..
    **http://www.facebook.com/Badger5Ltd**

    Check out the ever Growing eBay Shop>
    http://stores.ebay.co.uk/Badger-5-LTD?_trksid=p4340.l2563

    Badger 5 Ltd, Queen Annes Gate, Oldends Lane, Stonehouse, Glos, GL10 2DG


    http://www.badger5.co.uk, Tel:01453822880
    bill@badger5.co.uk
    **NEW** Badger5 Section CLICK here>> http://www.audi-sport.net/vb/213-badger-5/

  5. #44
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,088

    Hybrid K04 R&D

    That's a comforting thought because if it can cope with the size of your blower and the amount of airflow you must be pushing through there then it should certinally be fine with mine
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  6. #45
    1st Gear

    Status
    Offline
    Join Date
    Feb 2010
    Posts
    134
    This topic is like 50 shades of grey in man talk!!!!

    Loving it!!!!
    Yohan87 likes this.

  7. #46
    Westy's Avatar
    Double Dark Side! Diesel & 8P

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Cambridgeshire sometimes Hertfordshire
    Posts
    17,264

    Hybrid K04 R&D

    Quote Originally Posted by R-Tech-Nick View Post
    This topic is like 50 shades of grey in man talk!!!!

    Loving it!!!!
    50 shades of gay more like
    8P A3 TDI - 220bhp - 335lbft
    A3 Maintenance Thread
    Bye bye S3 you will be missed.
    S3 Build Thread







  8. #47
    coatesy's Avatar
    poking badgers with spoons
    Mouse Race Champion, Fishing the Sea Champion

    Status
    Offline
    Join Date
    Oct 2010
    Location
    Middlesbrough, United Kingdom
    Posts
    1,901

    Re: Hybrid K04 R&D

    Quote Originally Posted by Westy View Post
    50 shades of gay more like
    oooo hello that's my fav book....
    k03s/k04 hybrid a3 275bhp 293lbft
    vr6 mk2 golf gti

    fellow north east members add your name to this list.
    http://www.audi-sport.net/vb/north-e...%2A%2A%2A.html

  9. #48
    Dani_B19's Avatar
    Audi-sports own special child.

    Status
    Offline
    Join Date
    Nov 2008
    Location
    Barnsley
    Posts
    7,223
    Fag, haha.
    Driving the most secretive S3 on ASN

  10. #49
    Westy's Avatar
    Double Dark Side! Diesel & 8P

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Cambridgeshire sometimes Hertfordshire
    Posts
    17,264

    Hybrid K04 R&D

    So thread totally derailed thanks to Niki from RTech. I agree I didn't help.

    So back on track. Dan how far are we from being able to see some test results from your K04 work?
    8P A3 TDI - 220bhp - 335lbft
    A3 Maintenance Thread
    Bye bye S3 you will be missed.
    S3 Build Thread







  11. #50
    coatesy's Avatar
    poking badgers with spoons
    Mouse Race Champion, Fishing the Sea Champion

    Status
    Offline
    Join Date
    Oct 2010
    Location
    Middlesbrough, United Kingdom
    Posts
    1,901
    Quote Originally Posted by Westy View Post
    So thread totally derailed thanks to Niki from RTech. I agree I didn't help.

    So back on track. Dan how far are we from being able to see some test results from your K04 work?
    westy you cant pass them blame, you brought the gay in to the conservation lol

    i agree im excited to see what happens
    k03s/k04 hybrid a3 275bhp 293lbft
    vr6 mk2 golf gti

    fellow north east members add your name to this list.
    http://www.audi-sport.net/vb/north-e...%2A%2A%2A.html

  12. #51
    beachbuggy's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2010
    Location
    Surrey
    Posts
    1,741
    Quote Originally Posted by Westy View Post
    So thread totally derailed thanks to Niki from RTech. I agree I didn't help.

    So back on track. Dan how far are we from being able to see some test results from your K04 work?
    Head , manifold and turbo are all fitted and cylinder is being fitted this afternoon when I finish work. Agu block/pistons etc already fitted so engine should be finished hopefully in the next day or so, then it's just a case of fitting the Welly . I'm in a really dilemma though as the car is a 180 TT the intercoolering pipe work will run over the Passenger side of the engine and I don't like the way it sits so am looking at ways of making it look more OEM . But I might just get it up and running , regardless of looks and then work on the cosmetics. Also I'm sure unsure whether to run 2.5" or 3" fmic pipe work. I'm sure 2.5" is the correct way to go and bigger isn't better but just with high volume, low boost whether the large pipe will hinder this or go with 2.5" to keep some speed in the air flow. I know what I should do, listen to the experience of others. In which case I'll have a comparable setup to others and I can always try 3" at a later date.
    Pedrosousa likes this.

  13. #52
    RIP S3dave

    Status
    Offline
    Join Date
    May 2004
    Location
    nr Glos
    Posts
    7,139
    2.5" pipe is plenty...

    I am still on 63mm pipe on the ibiza
    unless you are punching for >600bhp it should be adequate
    **http://www.facebook.com/Badger5Ltd**

    Check out the ever Growing eBay Shop>
    http://stores.ebay.co.uk/Badger-5-LTD?_trksid=p4340.l2563

    Badger 5 Ltd, Queen Annes Gate, Oldends Lane, Stonehouse, Glos, GL10 2DG


    http://www.badger5.co.uk, Tel:01453822880
    bill@badger5.co.uk
    **NEW** Badger5 Section CLICK here>> http://www.audi-sport.net/vb/213-badger-5/

  14. #53
    beachbuggy's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2010
    Location
    Surrey
    Posts
    1,741
    Cheers, I will take heed and go with the 2.5"

    I forgot to thankyou as well of the offer on the dyno. Much appreciated, I will Definately take a trip upto in the near future.

  15. #54
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,088

    Hybrid K04 R&D

    What's the views on 60mm alloy pipe as has been bugging me for ages wishing that I had made it out of 63mm as iirc the 60mm measurement is od which will surely result in 57-58 id?

    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  16. #55
    Chlippo's Avatar
    3rd Gear

    Status
    Offline
    Join Date
    Apr 2010
    Location
    Canada/USA/Lebanon
    Posts
    664
    Excellent work as usual Dan! If you need Any help from this side of the world, let me know.
    Audi S3 AMK
    Relentless-Manifold, Relentless-3" downpipe decat, Forge 007 DV, autobahn88 TIP, K&N Panel filter, EBC yellowstuff brake pads, R32 ARB, Custom column dual gauge pod...waiting for a remap!

    For help/info/pricing on xs manifold and downpipe pm me (not affiliated, nor a reseller trader, just an enthusiast!)

  17. #56
    beachbuggy's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2010
    Location
    Surrey
    Posts
    1,741
    Just an update

    Engine is built, hybrid installed, engine all back together,
    heres a picture.. It's a TT I know...




    engine started 1st time, but it idled like crap and the xs power manifold glowed like ******* along with the turbo spinning like a nutter... Thankfully a quick revealed that the timing was 1 tooth retarded.. All I can say is my god. I didn't have a boost gauge hooked up but i reckon it was probably making boost at idle :-) its got the usual crap TT instrumental panel problem with the fuel gauge and coolant temp so that'll get sent off to be fixed . Also tried changing the fuel pump to a 225TT but found the tank was full so didn't fancy catching myself on fire so will wait until its nearly empty before doing that job.


    as you can see in the picture I tried to keep it stock looking, being a 180TT the inlets on he other side to the s3 and I don't like the up and over look of other Welly coolers intercooler pipes off the turbo so made this up to run down the side of the engine, its currently silicones up but I'll weld up the top pipes when I get chance to make it look prettier.. Cos TT's like to look pretty... This will hopefully be a beast in wossey's clothing...
    coatesy, dusty and Pedrosousa like this.

  18. #57
    Prawn's Avatar
    My other car is a MINI!!!!

    Status
    Offline
    Join Date
    Dec 2006
    Location
    Basingstoke
    Posts
    9,318
    looking smart Dan as I said this morning

    can't wait to see how you get on with this!
    -------------------------------------------------------------------------------------------------

    Prawns TFSI Turbo'd 1.8T Track Car

    But I know nothing so ignore me.

  19. #58
    coatesy's Avatar
    poking badgers with spoons
    Mouse Race Champion, Fishing the Sea Champion

    Status
    Offline
    Join Date
    Oct 2010
    Location
    Middlesbrough, United Kingdom
    Posts
    1,901

    Re: Hybrid K04 R&D

    This sounds awesome already, am I strange to be even considering saying hmm pm me how much this will cost me, might be fun next year ......

    No self control! iv just spend thousands ..
    k03s/k04 hybrid a3 275bhp 293lbft
    vr6 mk2 golf gti

    fellow north east members add your name to this list.
    http://www.audi-sport.net/vb/north-e...%2A%2A%2A.html

  20. #59
    s3dave's Avatar
    TFSI Hybrid

    Status
    Offline
    Join Date
    Nov 2009
    Location
    west yorks
    Posts
    10,121
    ^^ x 2 ^^

  21. #60
    phil miller's Avatar
    4th Gear

    Status
    Offline
    Join Date
    Sep 2012
    Location
    Devon
    Posts
    843
    very smart dan, i have been meaning to PM/text you to let you know mine is up are running and i followed your email to the letter, all seems good mate

  22. #61
    Neutral

    Status
    Offline
    Join Date
    Feb 2012
    Posts
    68
    Quote Originally Posted by beachbuggy View Post
    Also tried changing the fuel pump to a 225TT but found the tank was full so didn't fancy catching myself on fire so will wait until its nearly empty before doing that job.
    Its the vapours that are flammable, so less fuel = more vapour in the the tank = more flammable
    Of course IF you do actually start a fire then more fuel is a bad thing so just dont start a fire!

  23. #62
    beachbuggy's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2010
    Location
    Surrey
    Posts
    1,741
    Quote Originally Posted by lloydie1 View Post
    Its the vapours that are flammable, so less fuel = more vapour in the the tank = more flammable
    Of course IF you do actually start a fire then more fuel is a bad thing so just dont start a fire!
    It was more the putting my hand in a tank full to unplug the sensor wires and cross tank pipe. I think I'll have a big bucket of water to hand anyway!

  24. #63
    Westy's Avatar
    Double Dark Side! Diesel & 8P

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Cambridgeshire sometimes Hertfordshire
    Posts
    17,264

    Hybrid K04 R&D

    Quote Originally Posted by beachbuggy View Post
    It was more the putting my hand in a tank full to unplug the sensor wires and cross tank pipe. I think I'll have a big bucket of water to hand anyway!
    I did mine with half a tank of V Power in it and I had a banging headache from the vapours.
    8P A3 TDI - 220bhp - 335lbft
    A3 Maintenance Thread
    Bye bye S3 you will be missed.
    S3 Build Thread







  25. #64
    coatesy's Avatar
    poking badgers with spoons
    Mouse Race Champion, Fishing the Sea Champion

    Status
    Offline
    Join Date
    Oct 2010
    Location
    Middlesbrough, United Kingdom
    Posts
    1,901
    Quote Originally Posted by Westy View Post
    I did mine with half a tank of V Power in it and I had a banging headache from the vapours.
    i loved it when i did mine woooo petrol head buzz lol aww im a crack head ....


    you are right it does ming the car out for ages
    k03s/k04 hybrid a3 275bhp 293lbft
    vr6 mk2 golf gti

    fellow north east members add your name to this list.
    http://www.audi-sport.net/vb/north-e...%2A%2A%2A.html

  26. #65
    1st Gear

    Status
    Offline
    Join Date
    Nov 2011
    Location
    Sturminster Newton
    Posts
    190
    whats faulty with the fuel and temp i think ive got this problem is it in the cluster?

    Also i need to pm you about refurbing a k04 for me.
    A3 1.8TQS Minge blue
    Mods: AP coilovers, Strut Brace, Merc wheels, S3 brakes, hopefully going BT soon

  27. #66
    beachbuggy's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2010
    Location
    Surrey
    Posts
    1,741
    Update..

    Cars MOT'd and ont he road. It took a re-test as the it failed on a couple of things. Slightly worn brake hose at the front, easy fix.. Side lights not working, which when I got home where working... Typical.. and most importantly Emissions. Now this was my big concern, it only just failed on the CO2's and was slightly high on the Lambda. I was pretty confident the O2 sensor was good, it was on a stock map so I hoped it was just something like a boost leak or Dodgy maf. Thankfully It was a bad MAF as I swapped it over for a good one and it sailed through.. I also took the time to weld up the down pipe to cat back, unfortunately though its still dragging a little lower than i'd like so may have to take another look at it as it's not ideal at the moment.

    So yesterday, I refitted the AGU intake, fitteds the 630cc injectors and put on a cobbled together map. Thanks goes out to Tuffty for sending me 2 the injector maps.. Whilst I could have worked them out it saved me a lot of hassle and time just to plug in know working ones. Then I put in the new map for the uprated actuator and put basic maps in to get me going.

    Intially I set it to 15psi to see what I get. Knocked the timing back and went for a test drive.

    so first run went well, it drives very differently to the 2283 hybrid. The turbo sounds like a jet engine :-) not in a bad way, just it sounds like a lot of air being pumped. It seems to make boost pretty quickly but the response doesn't seem as urgent as the 2283 hybrid.. and it feels more laggy, now this could be because I heavily ported the turbine housing and it may not flow so well at low boost but better as the builds RPM.. I could also have a boost leak... I have one of the new Awesome DV valves and I'm not convinced by it yet so I think that may be blowing/not seated properly so I will check that out as well..

    Results from the first run where good.

    EGT's remained below 950. There was only a CF of 3 on one cylinder at 6750rpm, IAT's where down at 12 and fuelling was sensible at.85 while injector DC was around 65% at 6750rpm..

    As for the MAF... well 230grams at 15 psi at 6750rpm... so working on the good old /0.8 rule that's about 287bhp at 15psi... Which I'm very happy with thus far...

    On a side note, anyone that knows anything about TT's should know how crap the instrument clusters are, well I think mine is possiblyt he worst! The temp gauge is knacked , the fuel gauge as I found out last night when I ran out of fuel! is about 1/2 a tank out the Speedo can't decide sometimes if it's doing 20 or 140mph. The dash lights seem to flash quite happily as if bopping to the radio, and it loves to tell me I have no coolant, i'm over heating, my brake pads are worn all at once...

    Now this can be fixed but I think it needs to be condemed.....

  28. #67
    RIP S3dave

    Status
    Offline
    Join Date
    May 2004
    Location
    nr Glos
    Posts
    7,139
    oh the joys of tt instrument clusters... bag oh shyte are'nt they,.... doh!

    Lupo's 2283/k03 on 16psi is same flow/power numbers (slightly more but not much) in comparison.

    did you log the motor? sounds promising.. spool, and response I guess will be unusual with such a big compressor wheel hanging on the end of it.. Eliminator's, presuming this is the hotside, have never got going until 4krpm, which given they were not big wheel'd units,maybe down to the hotside feed to the turbine? You will know more how that looks of course.

    Its a huge step you even have it running so far tho.. well done for that.

    What next?
    **http://www.facebook.com/Badger5Ltd**

    Check out the ever Growing eBay Shop>
    http://stores.ebay.co.uk/Badger-5-LTD?_trksid=p4340.l2563

    Badger 5 Ltd, Queen Annes Gate, Oldends Lane, Stonehouse, Glos, GL10 2DG


    http://www.badger5.co.uk, Tel:01453822880
    bill@badger5.co.uk
    **NEW** Badger5 Section CLICK here>> http://www.audi-sport.net/vb/213-badger-5/

  29. #68
    coatesy's Avatar
    poking badgers with spoons
    Mouse Race Champion, Fishing the Sea Champion

    Status
    Offline
    Join Date
    Oct 2010
    Location
    Middlesbrough, United Kingdom
    Posts
    1,901

    Re: Hybrid K04 R&D

    Sounds fast...

    Awesome work Dan, you turbo wizard!
    k03s/k04 hybrid a3 275bhp 293lbft
    vr6 mk2 golf gti

    fellow north east members add your name to this list.
    http://www.audi-sport.net/vb/north-e...%2A%2A%2A.html

  30. #69
    superkarl's Avatar
    MAN OF STEEL

    Status
    Offline
    Join Date
    Mar 2010
    Location
    Liverpool/Southport. N west
    Posts
    7,520
    right lots of queries.
    i thought, that a 2283 hybrid, we were already pushing the exhaust side to its limits with that comp wheel. Because that comp wheel in its original turbo is good for 360-370hp. so the limiting factor in our puny ko4s is the hotside/turbine. I also thought this was evident with the suging from these hybrids.
    so with that in mind, how can there be more available with a bigger comp wheel, on that same turbine?

    Or is it that the comp housing is now enlarged and combined with the wheel its able to make same power with less boost?

    Will it still hit the same brick wall due to the turbine housing?

    i guess all this will be answered with more fettling and some dyno time, but im just trying to work this all out in my head theoretically

  31. #70
    beachbuggy's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2010
    Location
    Surrey
    Posts
    1,741
    It's definately not got the urgency that the 2283 hybrid had, It feels like there is alot of air being pumped but not very quickly if that makes sense. I'm running a stock k04 turbine housing buts been heavily ported and i'm guessing that as a result at low pressures in the turbine housing the turbine isn't as efficient as say a stock housing but as the pressures rise and the so does the exhaust gas flow it comes into its own, probably like you say the eliminator housing. And as you commented its around the 4k mark that you can feel hell knocking on the door!

    Next is to up the map upto 20psi, 2 reasons.. first to see what maf flow is at that point and to see if I get a proportional increase and second to see if I encounter any Surge as this is the potential point I would expect to see it.

    Just from the logging I've done thus far I'm seeing those big timing swings you saw, so I need to diable torque monitoring as well to see if that helps as I think once I get some timing put in and up the boost it's going to hamper the performance..

    As for the cluster, I might either buy another one or get this one fixed but from removing it already it looks like its been done once already, which doesn't help. I might also see if I can borrow an A3/s3 cluster, plug that in and see it works and if it does just make a hybrid cluster as they look similar just different facias...

  32. #71
    s3dave's Avatar
    TFSI Hybrid

    Status
    Offline
    Join Date
    Nov 2009
    Location
    west yorks
    Posts
    10,121
    Nice work Dan.. sounds promising....

  33. #72
    beachbuggy's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2010
    Location
    Surrey
    Posts
    1,741





    It looks more like 16psi than 15 on here ....

  34. #73
    coatesy's Avatar
    poking badgers with spoons
    Mouse Race Champion, Fishing the Sea Champion

    Status
    Offline
    Join Date
    Oct 2010
    Location
    Middlesbrough, United Kingdom
    Posts
    1,901

    Re: Hybrid K04 R&D

    What does the mega wobbly line mean on the boost pressure over 5000rpm
    k03s/k04 hybrid a3 275bhp 293lbft
    vr6 mk2 golf gti

    fellow north east members add your name to this list.
    http://www.audi-sport.net/vb/north-e...%2A%2A%2A.html

  35. #74
    beachbuggy's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2010
    Location
    Surrey
    Posts
    1,741
    Its just the small boost fluctuations that the maf sensor reads , it's only like .5psi . Its because I have a high sample rate Ie it records the boost pressure every 20ms and as there will never be a constant boost pressure it just shows up as wobbles.

    I could add a filter to give a straight line but really there is no point as it just makes it look prettier

  36. #75
    coatesy's Avatar
    poking badgers with spoons
    Mouse Race Champion, Fishing the Sea Champion

    Status
    Offline
    Join Date
    Oct 2010
    Location
    Middlesbrough, United Kingdom
    Posts
    1,901

    Re: Hybrid K04 R&D

    Ah right, all foreign to me lol but I would like to learn.
    k03s/k04 hybrid a3 275bhp 293lbft
    vr6 mk2 golf gti

    fellow north east members add your name to this list.
    http://www.audi-sport.net/vb/north-e...%2A%2A%2A.html

  37. #76
    Yohan87's Avatar
    2nd Gear

    Status
    Offline
    Join Date
    May 2011
    Posts
    404
    How did you get your IAT's so low?

  38. #77
    beachbuggy's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2010
    Location
    Surrey
    Posts
    1,741
    Quote Originally Posted by Yohan87 View Post
    How did you get your IAT's so low?

    Welly cooler and possibly the big compressor wheel.

    the more you compress air the hotter it gets, there is a chance that with this big compressor wheel it's not making the charge air so hot to make the same boost as say a k04.

    High volume , low speed ( cooler air )
    v
    low volume , high speed

    also it was 5pm last night and pretty chilly.

  39. #78
    Prawn's Avatar
    My other car is a MINI!!!!

    Status
    Offline
    Join Date
    Dec 2006
    Location
    Basingstoke
    Posts
    9,318
    Quote Originally Posted by coatesy View Post
    What does the mega wobbly line mean on the boost pressure over 5000rpm
    too many beers
    coatesy likes this.
    -------------------------------------------------------------------------------------------------

    Prawns TFSI Turbo'd 1.8T Track Car

    But I know nothing so ignore me.

  40. #79
    Prawn's Avatar
    My other car is a MINI!!!!

    Status
    Offline
    Join Date
    Dec 2006
    Location
    Basingstoke
    Posts
    9,318
    I cant wait to start doing some IAT logs with the WMI on now this cold weather has arrived!
    -------------------------------------------------------------------------------------------------

    Prawns TFSI Turbo'd 1.8T Track Car

    But I know nothing so ignore me.

  41. #80
    Neutral

    Status
    Offline
    Join Date
    Mar 2012
    Posts
    94
    Looking good Dan, when do you want to bolt this onto my 225 TT then, see how it performs on standard stage 2 hardware Oh and when I pulled my cluster out on my TT, it said made in france! Says it all
    Contact admins for advertising

    TT 225 + a bit!!

 

 
Page 2 of 6 FirstFirst 123456 LastLast

Similar Threads

  1. Hybrid k04 relentless/xs manifold and a 3"decat downpipe
    By woking rob in forum For Sale/Wanted - Audi Parts
    Replies: 3
    Last Post: 26th April 2012, 19:51
  2. RIP my K04 - Replace...or Hybrid K04
    By Jimgrim77 in forum A3/S3 Forum (8L Chassis)
    Replies: 62
    Last Post: 28th January 2012, 10:31
  3. Hybrid K04 question...
    By S3 Paul in forum A3/S3 Forum (8L Chassis)
    Replies: 12
    Last Post: 5th August 2011, 00:52
  4. Hybrid K04
    By vetch in forum A3/S3 Forum (8L Chassis)
    Replies: 9
    Last Post: 27th October 2009, 20:59
  5. SP51X (Hybrid K04-15)
    By docurley in forum A4/S4 forum(B5 Chassis)
    Replies: 21
    Last Post: 6th June 2008, 21:50

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO