New to VCDS - 1st Log Attached

[Ryan_W]

Morning all,

Having just received my Gendan cable, I've downloaded VCDS Lite (just paid $99 for the full version and waiting activation) and went for a quick run.

Now obviously only running on the 'lite' software, ports to log are limited.

I logged port #1, 2 & 3 and here are the results:

All look ok? Car is meant to be 270bhp (AMD remap with printout), but I'm not too sure, doesn't feel 270bhp...

Once Ross-Tech have activated my software, which ports should I be logging to make sure the car is performing as it should?

Cheers in advance,

Ryan

 

[<tuffty/>]

Airflow suggests 267 ish hp but of course this doesn't always mean it is doing that... is pulling fuel (block 001, Lambda Controller %) under boost which suggests a boost leak somewhere...

Here is a list of all the engine blocks...
http://www.ross-tech.com/vag-com/m_blocks/

<tuffty/>

 

[Ryan_W]

Cheers buddy...

Oh the joys of boost leaks! Guess I'll just have to buy some silicone hosing and replace the lot. Isn't the one under the inlet mani normally a prime culprit? What size hosing (ID) do I need to replace the lot?

Cheers