S3featesV9
Registered User
How the hell do those ds2 bulbs come out of the lense? I have twisted off the ballast connection from rear of bulb. But I can't figure out how the bulb comes out. Is it pull? Twist? Or is there a locking spring?
Fitting new ds2 bulbs.....
- Thread starter S3featesV9
- Start date
- Joined
- Jan 30, 2008
- Messages
- 18,708
- Reaction score
- 909
- Points
- 113
- Location
- Glenrothes, Fife, Scotland
On mine (A4) theres a circular locking ring on the outside of the bulbholder that you twist off, then the lamp itself just lifts out.
S3featesV9
Registered User
Cheers mate, shall check it out. Trying to be carefull aswell due to my lights currently falling apart inside!
S3featesV9
Registered User
Well that was more hassle than it was worth. Ended up completely breaking the inside of the offside headlamp. The internal part moves forwards and backwards 
Any advise to weather what is actually broken? Small white part is in the lense too, but that's always been there???
Any advise to weather what is actually broken? Small white part is in the lense too, but that's always been there???
vfr800
Registered User
Hi
Have you got any pictures?
The part the bulbs are mounted in - is this the bit that's wobbly? Hopefully you just pushed the rubber mountings of the adjusters.
If you broke something you may need to epoxy it back together.
Liam
Have you got any pictures?
The part the bulbs are mounted in - is this the bit that's wobbly? Hopefully you just pushed the rubber mountings of the adjusters.
If you broke something you may need to epoxy it back together.
Liam
