3rd gear log (readable this time) lol

[sandwich1987]

Screen01.jpg picture by sandwich1987 - Photobucket

Seen as how i made an **** of the first post ithought id try this.... comments please.

 

[Broken Byzan]

Stage 1 map i assume on AUM?

 

[sandwich1987]

no sorry mate my heads up my **** with this i keep forgetting to add info in. its a 2002 s3 bam engine with a silcione tip, jetex and 007dv been getting the feeling my cars a bit bogged down recently and was just looking for some feedback from the logs or if i should log other block etc cheers

 

[superkarl]

poorly airflow. and low boost request.
stock lambda?

 

[Broken Byzan]

poorly airflow. and low boost request.
stock lambda?

What Karl said, hence my assumption it was a 150 BHP AUM.

First call would be a faulty MAF, that may have an impact on fueling also.

 

[sandwich1987]

Is that just an unplug te mag job an see if it runs better?

 

[badger5]

as a start yes..

 

[Alex C]

Block 002

Block 31

Block 112

Time Stamp (s)​

Engine Speed (rpm)​

Engine Load (%)​

Timing (ms)​

Air Flow (g/s)​

Time Stamp (s)​

Lambda​

Specified Lamda​

Time Stamp (s)​

Engine Speed (rpm)​

Engine Load (%)​

Specified Charge Pressure (mbar)​

Charge Pressure (mbar)​

387.32​

760​

27.1​

2.38​

3.89​

387.74​

1.016​

0.992​

388.22​

760​

27.1​

1020​

1010​

388.63​

720​

27.1​

2.38​

3.86​

389.13​

1.008​

0.992​

389.53​

720​

27.1​

1020​

1010​

390.04​

800​

25.6​

2.38​

3.81​

390.44​

1.008​

0.992​

390.94​

760​

27.8​

1020​

1010​

391.36​

1480​

46.6​

4.42​

14.17​

391.75​

0.984​

0.992​

392.15​

1720​

54.1​

1020​

1040​

392.56​

1600​

57.1​

4.76​

18.58​

392.97​

1​

0.992​

393.47​

2080​

63.2​

1020​

1110​

393.85​

2400​

64.7​

5.78​

30.5​

394.26​

0.969​

0.992​

394.67​

1840​

15​

1020​

1070​

395.08​

1600​

36.1​

4.08​

16.64​

395.48​

0.953​

0.984​

395.98​

1920​

69.2​

1150​

1100​

396.49​

2160​

75.2​

6.46​

33.25​

396.97​

0.992​

0.992​

397.39​

2560​

52.6​

1020​

1230​

397.9​

2560​

18​

1.7​

2.92​

398.39​

0.992​

0.984​

398.79​

1720​

27.1​

1020​

1040​

399.19​

1760​

48.1​

4.42​

17.53​

399.59​

0.977​

0.992​

399.99​

1880​

55.6​

1020​

1070​

400.39​

1960​

68.4​

6.12​

27.33​

400.9​

0.984​

0.992​

401.3​

2160​

85.7​

1300​

1230​

401.7​

2240​

87.2​

7.48​

38.44​

402.12​

1​

0.992​

402.52​

2480​

90.2​

1460​

1320​

403.02​

2680​

97​

8.5​

50.58​

403.53​

0.984​

0.992​

404.02​

3080​

122.6​

1630​

1580​

404.42​

3280​

127.8​

11.22​

85.03​

404.82​

0.992​

0.992​

405.24​

3680​

141.4​

1850​

1830​

405.64​

3840​

142.1​

12.24​

105.19​

406.04​

1.008​

0.992​

406.44​

4240​

140.6​

1870​

1830​

406.84​

4440​

139.8​

11.9​

118.89​

407.35​

1.008​

0.992​

407.75​

4880​

151.9​

1930​

1920​

408.15​

5040​

150.4​

12.92​

146.83​

408.55​

0.984​

0.992​

408.95​

5360​

151.9​

1950​

1930​

409.46​

5600​

148.1​

12.58​

158.42​

409.86​

0.977​

0.992​

410.28​

5880​

115.8​

1840​

1770​

410.76​

6000​

128.6​

11.22​

141.78​

411.16​

0.977​

0.977​

411.57​

6240​

111.3​

1690​

1670​

411.97​

6320​

109​

10.2​

132.97​

412.39​

0.899​

0.852​

412.89​

6560​

117.3​

1400​

1540​

...​

 

[sandwich1987]

with the maf removed are there specific blocks i should log on another run?

 

[Alex C]

you can just unplug the MAF and go for a drive, if it feels better with it unplugged then it points towards your MAF being knackered

 

[badger5]

with the maf removed are there specific blocks i should log on another run?

same blocks..

its if it "feels" better without maf.. which is ~£199bhp worth of logged airflow.. so some 20bhp down.. which could well be tired maf sensor

 

[sandwich1987]

al give that a try tonight then. thanks for the info guys!