Haldex

[G60DAN]

Hello all

Right I'm getting an error code 65535 from my haldex had a look at the plugs and there fine put a new earth strap on and still get the code. Now what I would like to know is there any coming back from this

Internal Control Module memory error or do I need a new one. Thanks for any help

 

[<tuffty/>]

65535 - Ross-Tech Wiki

What makes you think its the Haldex? most of the info I have seen suggests the ECU and check sum errors?

What module did you scan? have you got the output of the scan from VCDS to post up?

<tuffty/>

 

[<tuffty/>]

Controller may be to blame if its coming from the AWD module...

<tuffty/>

 

[G60DAN]

It was AWD module that was scanned.

 

[<tuffty/>]

Controller issue then by the sounds...

<tuffty/>

 

[G60DAN]

Right got the print out

Address 22 AWD Labels 02D-900-554.1b1
Part no: 02D 900 554 B
Component Heldex LSC ECC. 0006
1 Fault Found
65535 Internal Control Module Memory Error
00-00

 

[<tuffty/>]

That fault code is associated with checksum errors... maybe water in the controller or something... you may be able to remove the controller and take it apart to clean it/dry it/resolder joints etc...

<tuffty/>

 

[G60DAN]

Thanks Tuffty will have a look at the weekend and pull it apart and see if it's wet in side.