JMB RetrofitsChris Nott
Page 42 of 54 FirstFirst ... 3235363738394041424344454647484952 ... LastLast
Results 1,641 to 1,680 of 2160
Like Tree351Likes

Thread: Stacey's Belated Yo Yo Build Thread

  1. #1641
    RIP S3dave

    Status
    Offline
    Join Date
    May 2004
    Location
    nr Glos
    Posts
    7,139


    Reassembling the find in the box a heatshield plate which was on there and stripped off earlier (I did'nt remove it and did'nt know it existed) Now I've found it, I now need to change and modify it and re-route some stuff....... <sighs>

    All lines on oil/water tightened and ready for fluids tomorrow once I have modified the ally heatshield thingy.
    I have added some additional heatshield in front of the brake master cylinder also.. hot hot hot..
    **http://www.facebook.com/Badger5Ltd**

    Check out the ever Growing eBay Shop>
    http://stores.ebay.co.uk/Badger-5-LTD?_trksid=p4340.l2563

    Badger 5 Ltd, Queen Annes Gate, Oldends Lane, Stonehouse, Glos, GL10 2DG


    http://www.badger5.co.uk, Tel:01453822880
    bill@badger5.co.uk
    **NEW** Badger5 Section CLICK here>> http://www.audi-sport.net/vb/213-badger-5/

  2. # ADS
    ADS
    Join Date
    Always
    Location
    Global
    Posts
    Many
     
  3. #1642
    RIP S3dave

    Status
    Offline
    Join Date
    May 2004
    Location
    nr Glos
    Posts
    7,139


    Loosely reassembled for final checking stuff.. Fluids tomorrow! Fingers and Toes Crossed!

    s3dave and Sam_ like this.
    **http://www.facebook.com/Badger5Ltd**

    Check out the ever Growing eBay Shop>
    http://stores.ebay.co.uk/Badger-5-LTD?_trksid=p4340.l2563

    Badger 5 Ltd, Queen Annes Gate, Oldends Lane, Stonehouse, Glos, GL10 2DG


    http://www.badger5.co.uk, Tel:01453822880
    bill@badger5.co.uk
    **NEW** Badger5 Section CLICK here>> http://www.audi-sport.net/vb/213-badger-5/

  4. #1643
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,088
    Looks good looking at the bay near complete and very nerve racking knowing it will be turning over shortly

    The lines look right at home in the bay and definately look like they're built to last

    Can't wait to know it works lol
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  5. #1644
    s3dave's Avatar
    TFSI Hybrid

    Status
    Offline
    Join Date
    Nov 2009
    Location
    west yorks
    Posts
    10,121
    Whoooo Exciting....

  6. #1645
    ScottD3's Avatar
    I want your faulty electronics

    Status
    Offline
    Join Date
    Nov 2010
    Location
    English Riviera
    Posts
    14,968
    Will it be at Inters?

    Please say yes!!
    Jason.s likes this.

    New Car, New Thread: Scott's Akoya Silver A8
    Gone But Not Forgotten: Audrey's Build Thread

  7. #1646
    RIP S3dave

    Status
    Offline
    Join Date
    May 2004
    Location
    nr Glos
    Posts
    7,139
    this picture will confirm its non-readyness for inters..
    I am absolutely gutted as will be stacey.



    Leaking water hardpipe on s3 bt build. Gutted - YouTube
    **http://www.facebook.com/Badger5Ltd**

    Check out the ever Growing eBay Shop>
    http://stores.ebay.co.uk/Badger-5-LTD?_trksid=p4340.l2563

    Badger 5 Ltd, Queen Annes Gate, Oldends Lane, Stonehouse, Glos, GL10 2DG


    http://www.badger5.co.uk, Tel:01453822880
    bill@badger5.co.uk
    **NEW** Badger5 Section CLICK here>> http://www.audi-sport.net/vb/213-badger-5/

  8. #1647
    Westy's Avatar
    Double Dark Side! Diesel & 8P

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Cambridgeshire sometimes Hertfordshire
    Posts
    17,264
    Bummer
    8P A3 TDI - 220bhp - 335lbft
    A3 Maintenance Thread
    Bye bye S3 you will be missed.
    S3 Build Thread







  9. #1648
    ScottD3's Avatar
    I want your faulty electronics

    Status
    Offline
    Join Date
    Nov 2010
    Location
    English Riviera
    Posts
    14,968
    Quote Originally Posted by badger5 View Post
    this picture will confirm its non-readyness for inters..
    I am absolutely gutted as will be stacey.

    Leaking water hardpipe on s3 bt build. Gutted - YouTube
    **** man.
    That's a shame.


    Will this help?
    Halfords | Holts Radweld 250ml

    New Car, New Thread: Scott's Akoya Silver A8
    Gone But Not Forgotten: Audrey's Build Thread

  10. #1649
    RIP S3dave

    Status
    Offline
    Join Date
    May 2004
    Location
    nr Glos
    Posts
    7,139
    the pipe in question looks like this one I have here>


    and the leaking joint is the top pipe in the picture, where it Tee's off.. Busted or corrded braze joint or something I dont know.


    Big strip down to access it and remove it, which busts the already very marginal timeline I was trying to achieve..
    Absolutely bloody gutted to be honest. MANY many hours stuffed in solely on this build these past 10 days... but this tips it out of reach for inters.. Sorry Stacey.

    I could frigging cry!
    **http://www.facebook.com/Badger5Ltd**

    Check out the ever Growing eBay Shop>
    http://stores.ebay.co.uk/Badger-5-LTD?_trksid=p4340.l2563

    Badger 5 Ltd, Queen Annes Gate, Oldends Lane, Stonehouse, Glos, GL10 2DG


    http://www.badger5.co.uk, Tel:01453822880
    bill@badger5.co.uk
    **NEW** Badger5 Section CLICK here>> http://www.audi-sport.net/vb/213-badger-5/

  11. #1650
    Prawn's Avatar
    My other car is a MINI!!!!

    Status
    Offline
    Join Date
    Dec 2006
    Location
    Basingstoke
    Posts
    9,318
    :'(

    I HATE those metal water pipes. I've had 2 crack before, absolute nightmare to replace as you will well know Bill
    -------------------------------------------------------------------------------------------------

    Prawns TFSI Turbo'd 1.8T Track Car

    But I know nothing so ignore me.

  12. #1651
    RIP S3dave

    Status
    Offline
    Join Date
    May 2004
    Location
    nr Glos
    Posts
    7,139
    so Close
    **http://www.facebook.com/Badger5Ltd**

    Check out the ever Growing eBay Shop>
    http://stores.ebay.co.uk/Badger-5-LTD?_trksid=p4340.l2563

    Badger 5 Ltd, Queen Annes Gate, Oldends Lane, Stonehouse, Glos, GL10 2DG


    http://www.badger5.co.uk, Tel:01453822880
    bill@badger5.co.uk
    **NEW** Badger5 Section CLICK here>> http://www.audi-sport.net/vb/213-badger-5/

  13. #1652
    Westy's Avatar
    Double Dark Side! Diesel & 8P

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Cambridgeshire sometimes Hertfordshire
    Posts
    17,264
    Quote Originally Posted by badger5 View Post
    so Close
    I've just gone off in my holster!
    8P A3 TDI - 220bhp - 335lbft
    A3 Maintenance Thread
    Bye bye S3 you will be missed.
    S3 Build Thread







  14. #1653
    ScottD3's Avatar
    I want your faulty electronics

    Status
    Offline
    Join Date
    Nov 2010
    Location
    English Riviera
    Posts
    14,968
    Quote Originally Posted by badger5 View Post
    so Close
    Stacey, you going to keep it like that or try and fit some of the standard drivers and passenger side covers?

    New Car, New Thread: Scott's Akoya Silver A8
    Gone But Not Forgotten: Audrey's Build Thread

  15. #1654
    rhubarb4's Avatar
    Certified Jardo Slayer

    Status
    Offline
    Join Date
    Mar 2008
    Location
    Midlands
    Posts
    1,715
    OEM Scott haha, don't think they will be able to fit in that beast
    <img src=http://cdn.as-static.com/vb/images/smilies/scared2.gif border=0 alt= title=Scared2 class=inlineimg />
    Quote Originally Posted by superkarl View Post
    i wear ladies underwear to work.

  16. #1655
    6th Gear

    Status
    Offline
    Join Date
    May 2010
    Location
    Bedford
    Posts
    2,877
    Thought he was getting a massive filter not that little thing?

    Cactus green 8L S3 - B5 TIP + Jetex, Revised 007p, R32 rear ARB, AP Coilovers, Compbrake rear arms, Full Powerflexed dogbone.

  17. #1656
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,748
    But look at the girth on it. It's not all about the length. Saying that, I just ordered a 14"er.

    This is bad news. I was looking forward to seeing this making epic power asap.
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  18. #1657
    RIP S3dave

    Status
    Offline
    Join Date
    May 2004
    Location
    nr Glos
    Posts
    7,139
    Quote Originally Posted by Jason.s View Post
    Thought he was getting a massive filter not that little thing?
    he is, when it ever turns up

    this is "a filter" so I can proceed with it.. or was the plan this morning when I fitted it
    Jason.s likes this.
    **http://www.facebook.com/Badger5Ltd**

    Check out the ever Growing eBay Shop>
    http://stores.ebay.co.uk/Badger-5-LTD?_trksid=p4340.l2563

    Badger 5 Ltd, Queen Annes Gate, Oldends Lane, Stonehouse, Glos, GL10 2DG


    http://www.badger5.co.uk, Tel:01453822880
    bill@badger5.co.uk
    **NEW** Badger5 Section CLICK here>> http://www.audi-sport.net/vb/213-badger-5/

  19. #1658
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,088
    What a complete pain in ****ing arse.....but never mind....maybe it just wasnt meant to be?

    Am really bummed but at least when I pick the car up now I can put some miles on it and get used to it again before launching it up the strip the day I get it back

    On another plus side it wont be rushed (although I know bill wouldnt rush and let sub standard work leave his) but it will now get all the time it needs within reason on the mapping etc to make it the best it can be

    Also am hoping to get some time off of work and be there during the mapping process and learn a little
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  20. #1659
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,088
    I still plan on making it to inters but have got to speak to my mate Dave about a lift whos currently in Ibiza and not had a reply for a couple of days so not sure if hes still conscious?

    Other slight problem is am waiting on a part for my fishing bivvy which was 3-5 working days on monday so may not have shelter?

    On a plus side I can stay intoxicated for the weekend and weather looks amazing!

    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  21. #1660
    Westy's Avatar
    Double Dark Side! Diesel & 8P

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Cambridgeshire sometimes Hertfordshire
    Posts
    17,264
    Come along big boy. If Dave blows you out is there anyone else local you can get a lift off? It'll be a good laugh even without your car
    8P A3 TDI - 220bhp - 335lbft
    A3 Maintenance Thread
    Bye bye S3 you will be missed.
    S3 Build Thread







  22. #1661
    RIP S3dave

    Status
    Offline
    Join Date
    May 2004
    Location
    nr Glos
    Posts
    7,139
    Quote Originally Posted by StaceyS3 View Post
    What a complete pain in ****ing arse.....but never mind....maybe it just wasnt meant to be?

    Am really bummed but at least when I pick the car up now I can put some miles on it and get used to it again before launching it up the strip the day I get it back

    On another plus side it wont be rushed (although I know bill wouldnt rush and let sub standard work leave his) but it will now get all the time it needs within reason on the mapping etc to make it the best it can be

    Also am hoping to get some time off of work and be there during the mapping process and learn a little
    It wont be rushed.. Too much time and ££ in vested in the build to rush for a date, and risk issues by missing something.. Crazy to attempt it. My diary and volume of complete Custom work, means planning turns to hell, compounded by parts deliveries being late, and the step by step evolution of such a custom build... not rushing it, and where a special part would be best solution, one is made ot sourced. This takes time to do. Unless you experience the work thats required in building something like this to this level, you cannot begin to understand. Two folks on here know whats involved, mark and tuffty and how multiple custom builds, and the process of building such things, has a huge domino effect on all other jobs.. (which I have several around currently)

    No one was expecting a factory pipe to leak.. bizarre.. location buried as it is behind all manner of stuff it whats tipped the balance.

    +ve's being it will get some on the road milage before being launched, and the completion of the build once this is fixed, and any other gremlins arise have opportunity to be fixed. (which I fully expect. its all new at the end of the day)
    Heat cycles and remaining fluid tight will be a next milestone to pass.

    still gutting however for everyone "directly" involved.

    Bring your suntan cream for the weekend.. Scorchio promises
    **http://www.facebook.com/Badger5Ltd**

    Check out the ever Growing eBay Shop>
    http://stores.ebay.co.uk/Badger-5-LTD?_trksid=p4340.l2563

    Badger 5 Ltd, Queen Annes Gate, Oldends Lane, Stonehouse, Glos, GL10 2DG


    http://www.badger5.co.uk, Tel:01453822880
    bill@badger5.co.uk
    **NEW** Badger5 Section CLICK here>> http://www.audi-sport.net/vb/213-badger-5/

  23. #1662
    Scullies's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Feb 2012
    Location
    Dubai
    Posts
    1,240
    Quote Originally Posted by badger5 View Post
    the pipe in question looks like this one I have here>


    and the leaking joint is the top pipe in the picture, where it Tee's off.. Busted or corrded braze joint or something I dont know.


    Big strip down to access it and remove it, which busts the already very marginal timeline I was trying to achieve..
    Absolutely bloody gutted to be honest. MANY many hours stuffed in solely on this build these past 10 days... but this tips it out of reach for inters.. Sorry Stacey.

    I could frigging cry!
    cheese's rice! This sucks big hairy donkey balls.
    Custom stainless coolant line on the cards?

    or if you feeling redonkulously rich and need some BLING

    Machined Parts
    Last edited by Scullies; 4th July 2013 at 05:40.

  24. #1663
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,088
    Was starting to get a bit apprehensive that the car (and me with little experience or familiarity with it) would be going straight on the strip

    It will be nice to put some miles on it first now and may even drop in a cheeky rwyb day at pod to satisfy my curiousity lol

    As lovely as one of them stainless pipes looks I'll have to pass and stick with an oem one with a £10 AN adaptor welded on the end
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  25. #1664
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,748
    Yeah I think I will probably end up sticking to OEM. Fortunately conditions are a little less harsh here than the UK so rust is really a non issue for the most part.

    I was looking at the CTS housing from that guy (I posted it in another thread) but once you go AN you really have to do the whole lot. I'll probably just use OEM 90 degree fittings for the bulkhead?
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  26. #1665
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,088
    Oem is definitely cheaper but my main worry was hoses melting on the tial by going underneath and to be honest its a lot tighter than you would think, not sure if oem 90's will fit





    I know that with james leon he was able to use the oem 225 hoses that go over the TIP with some bending but comparing photos previously the revised design means the turbo sits higher by over an inch iirc?
    CHEZ likes this.
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  27. #1666
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,748
    Prawn mentioned the A3s use the 90s:
    Coolant setup for a big turbo

    I thought the 225 used 45? I've not looked that closely. I was thinking of using the 90s (clamp on) or just use AN push fits. Where did you get your adapters? That dude wants a pretty penny for them. I swore IE done them, I'll send David a message.
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  28. #1667
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,748
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  29. #1668
    RIP S3dave

    Status
    Offline
    Join Date
    May 2004
    Location
    nr Glos
    Posts
    7,139
    the stainless pipe thing looks neat... and a little expensive, but I know what short batch custom stuff costs..
    personally I would make it in ally like I have done on the oil drain.
    **http://www.facebook.com/Badger5Ltd**

    Check out the ever Growing eBay Shop>
    http://stores.ebay.co.uk/Badger-5-LTD?_trksid=p4340.l2563

    Badger 5 Ltd, Queen Annes Gate, Oldends Lane, Stonehouse, Glos, GL10 2DG


    http://www.badger5.co.uk, Tel:01453822880
    bill@badger5.co.uk
    **NEW** Badger5 Section CLICK here>> http://www.audi-sport.net/vb/213-badger-5/

  30. #1669
    RIP S3dave

    Status
    Offline
    Join Date
    May 2004
    Location
    nr Glos
    Posts
    7,139
    this is how yours looks currently Stacey
    UK weather not helping.. No boots fitted to the connectors?
    **http://www.facebook.com/Badger5Ltd**

    Check out the ever Growing eBay Shop>
    http://stores.ebay.co.uk/Badger-5-LTD?_trksid=p4340.l2563

    Badger 5 Ltd, Queen Annes Gate, Oldends Lane, Stonehouse, Glos, GL10 2DG


    http://www.badger5.co.uk, Tel:01453822880
    bill@badger5.co.uk
    **NEW** Badger5 Section CLICK here>> http://www.audi-sport.net/vb/213-badger-5/

  31. #1670
    Scullies's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Feb 2012
    Location
    Dubai
    Posts
    1,240
    Ooh that's nasty.

  32. #1671
    RIP S3dave

    Status
    Offline
    Join Date
    May 2004
    Location
    nr Glos
    Posts
    7,139
    sump off next to remedy these.


    sack the welder me thinks.
    **http://www.facebook.com/Badger5Ltd**

    Check out the ever Growing eBay Shop>
    http://stores.ebay.co.uk/Badger-5-LTD?_trksid=p4340.l2563

    Badger 5 Ltd, Queen Annes Gate, Oldends Lane, Stonehouse, Glos, GL10 2DG


    http://www.badger5.co.uk, Tel:01453822880
    bill@badger5.co.uk
    **NEW** Badger5 Section CLICK here>> http://www.audi-sport.net/vb/213-badger-5/

  33. #1672
    superkarl's Avatar
    MAN OF STEEL

    Status
    Offline
    Join Date
    Mar 2010
    Location
    Liverpool/Southport. N west
    Posts
    7,520
    Is that from the baffles inside?
    Well spotted!

  34. #1673
    Westy's Avatar
    Double Dark Side! Diesel & 8P

    Status
    Offline
    Join Date
    Dec 2008
    Location
    Cambridgeshire sometimes Hertfordshire
    Posts
    17,264
    Oh dear!
    8P A3 TDI - 220bhp - 335lbft
    A3 Maintenance Thread
    Bye bye S3 you will be missed.
    S3 Build Thread







  35. #1674
    RIP S3dave

    Status
    Offline
    Join Date
    May 2004
    Location
    nr Glos
    Posts
    7,139
    Quote Originally Posted by superkarl View Post
    Is that from the baffles inside?
    Well spotted!
    it dripping oil..even I can find drips on fluids on my clean floor

    Added 2 fluids into the engine, 2 fluids drips out so far..

    welder needs a kick up the arse whoever did it.
    <sighs>
    **http://www.facebook.com/Badger5Ltd**

    Check out the ever Growing eBay Shop>
    http://stores.ebay.co.uk/Badger-5-LTD?_trksid=p4340.l2563

    Badger 5 Ltd, Queen Annes Gate, Oldends Lane, Stonehouse, Glos, GL10 2DG


    http://www.badger5.co.uk, Tel:01453822880
    bill@badger5.co.uk
    **NEW** Badger5 Section CLICK here>> http://www.audi-sport.net/vb/213-badger-5/

  36. #1675
    s3dave's Avatar
    TFSI Hybrid

    Status
    Offline
    Join Date
    Nov 2009
    Location
    west yorks
    Posts
    10,121
    At least it didnt splatter all over the strip!! Maybe the water leak was a blessing in disguise then!

  37. #1676
    Scullies's Avatar
    5th Gear

    Status
    Offline
    Join Date
    Feb 2012
    Location
    Dubai
    Posts
    1,240
    Bill. have you primed the fuel system yet? Just wondering if those AN fittings on the fuel lines are leak free. I read once fitted they are almost impossible to remove. You need the mother of all Mcgyver tools and little gipsey hands.

  38. #1677
    Dani_B19's Avatar
    Audi-sports own special child.

    Status
    Online
    Join Date
    Nov 2008
    Location
    Barnsley
    Posts
    7,223
    Whos the baffled sump by? Please dont say forge lol.
    Driving the most secretive S3 on ASN

  39. #1678
    Broken Byzan's Avatar
    Photographic Moderator

    Status
    Online
    Join Date
    Apr 2004
    Location
    Cardiff, United Kingdom
    Posts
    12,506

    My Social Networking

    Follow Broken Byzan On Twitter Add Broken Byzan on Facebook Add Broken Byzan on Google+ Visit Broken Byzan's Youtube Channel
    Quote Originally Posted by badger5 View Post
    sump off next to remedy these.


    sack the welder me thinks.
    The car is crying because of the welds..

  40. #1679
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,088
    Sump was one i had knocking about but bought the baffled sump inserts from nick chantler

    Pic of the inside of the sump



    Absolutely praying that this is the end of it now
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  41. #1680
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,088
    Quote Originally Posted by Byzan Pics View Post
    The car is crying because of the welds..
    Car will make me cry soon and think Bills not far off from burning it!
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

 

 

Similar Threads

  1. My build thread....
    By S3 Big Andy in forum A3/S3/Sportback (8P Chassis)
    Replies: 315
    Last Post: 18th February 2014, 20:58
  2. A4 Build Thread
    By AudiSport in forum Audi S4/A4/A4 Cab (B7 Chassis)
    Replies: 37
    Last Post: 4th September 2011, 09:45
  3. My Build Thread
    By Triple.O.G in forum Audi S4/A4/A4 Cab (B7 Chassis)
    Replies: 4
    Last Post: 1st August 2011, 20:36
  4. A4 Build Thread
    By AudiSport in forum Audi S4/A4/A4 Cab (B7 Chassis)
    Replies: 0
    Last Post: 20th November 2010, 22:14
  5. My Build Thread....
    By L0WRiDE in forum A3/S3 Forum (8L Chassis)
    Replies: 3
    Last Post: 9th May 2009, 20:28

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO