Monster MotorsportBadger5
Page 15 of 55 FirstFirst ... 5891011121314151617181920212225 ... LastLast
Results 561 to 600 of 2165
Like Tree355Likes

Thread: Stacey's Belated Yo Yo Build Thread

  1. #561
    Andrew@A.L.D's Avatar
    Cylinder Head Master

    Status
    Online
    Join Date
    Jun 2009
    Location
    Leeds
    Posts
    3,472
    Well its good info for me so it benefits both of use
    RIP S3dave/David Marshall stickers now available

    FOR SALE
    None resonated Milltek exhaust,
    Adjustable FPR from 1-5 bar, 2 sets of Unused ARP 3/8 2000 rod bolts, relentless 200 cell cat pipe, Std AGU Crankshaft. Ported & Reconditioned Cylinder head service.

  2. # ADS
    ADS
    Join Date
    Always
    Location
    Global
    Posts
    Many
     
  3. #562
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099
    I've eventually got of my arse and fitted my heko wind deflectors that have been sitting on my windowsill for 6 months +

    I'm chuffed with them and find that they make a big difference to the wind noise at high speed which is a bonus as have the window open most of the time as haven't got round to getting the sitcom regassed

    Here's a couple of pics with them fitted, the black grill surround and the powder coated goodies







    Also after fitting them spacers on the front coilovers just before inters it really was sitting to high on the rear so whilst it was off the road I lowered the rear back down a touch



    What you think about the height? I think it's a lot better than at inters and I dont get scrubbing on the front like I used to so think I'm pretty much there
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  4. #563
    Jay A3's Avatar
    come fly with me

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Greenhithe, Kent
    Posts
    1,788
    Glad you decided to wash the wheels! Compliments of rhubarb...
    <Jay A3 build thread>



    241bhp K03s - R Tech

  5. #564
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,788
    Looks awesome mate. Still quite low eh? Congratulations on being old and fitting wind deflectors

    My ground control mounts are on their way, but I think I need to get some nuts for the strut tops. Any idea on the size?
    Handling mods++. HTA3582 stroker soon-ish. Hiding parts from the mrs since 2011. Build thread

  6. #565
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099
    Quote Originally Posted by Jay A3 View Post
    Glad you decided to wash the wheels! Compliments of rhubarb...
    That was a pita at inters i actually had to put some effort into making my car look clean

    Ive just resumed the usual practice of getting the local bosso's to do all my car cleaning needs
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  7. #566
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099
    Quote Originally Posted by Sam_ View Post
    Looks awesome mate. Still quite low eh? Congratulations on being old and fitting wind deflectors

    My ground control mounts are on their way, but I think I need to get some nuts for the strut tops. Any idea on the size?
    Cheers mate and yeah is reasonably low but looks lower in that pic than real life for some reason

    Iirc you just use the oem nuts that were originally on there or they come with them? Cant remember exactly but know i didnt have to buy any extras
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  8. #567
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,788
    Yeah, mine are used (bargain price) so not sure they will come with them. You're not meant to use OEM they reckon, because they are flat. They recommend you use a standard nyloc (which comes in the kit new). Just not sure on the thread size and pitch. To google!
    Handling mods++. HTA3582 stroker soon-ish. Hiding parts from the mrs since 2011. Build thread

  9. #568
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099
    Ahh yes true it is a nyloc

    It will be oem thread size and pitch though M14 x 1.5 rings a bell but really not sure?
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  10. #569
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,788
    Yeah, after a bit of research, M14x1.5. Cheers! Attempting to fit the brembos again tomorrow. Wonder how it'll end up this time :/
    Handling mods++. HTA3582 stroker soon-ish. Hiding parts from the mrs since 2011. Build thread

  11. #570
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099
    Block is nearly prepped for painting, will hopefully be cleaning it in an ultrasonic cleaning tank tommorrow to get the last few bits and to clean the galleries out

    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  12. #571
    Jay A3's Avatar
    come fly with me

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Greenhithe, Kent
    Posts
    1,788
    By eye it already looks so clean!
    <Jay A3 build thread>



    241bhp K03s - R Tech

  13. #572
    superkarl's Avatar
    MAN OF STEEL

    Status
    Offline
    Join Date
    Mar 2010
    Location
    Liverpool/Southport. N west
    Posts
    7,533
    how did you prep it so well??

  14. #573
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099
    Cheers guys

    Result of muchos time and effort and the aid of a rotary wire brush
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  15. #574
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099
    Well I'm shocked how well this has come out but put the block in an ultrasonic tank today for a good few 20 min cycles and the result is brilliant

    I've got to give it a wipe down as a lot of the remaining stuff wipes off and make sure that anything that was loosened in the galleries isn't still in there but the insides look like new





    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  16. #575
    Reesy's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2010
    Location
    East Sussex
    Posts
    3,604
    Far too much time on your hands, and far too much useful machinery etc for you to use. I'm jealous.


  17. #576
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099
    Me never, I'm always working with very little time off but suppose work can sometimes be a bit quiet with the nature of the job

    Since mid may I think I have only been off for 2 Sunday's, 1 for inters and one to recover from Westys 30th, although one plus side of working a lot of weekends is that it's good homework time with little management about lol
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  18. #577
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099
    Nothing to exciting but manage to get the block painted today





    Also have got a box of various goodies waiting in customs from IE and southbend, then have just placed an order with Issam at INA which will be here shortly

    All that leaves is an order of oem bits and all is ready for various machining and to be carefully slapped together......really can't wait
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  19. #578
    Westy's Avatar
    Double Dark Side! Diesel & 8P

    Status
    Online
    Join Date
    Dec 2008
    Location
    Cambridgeshire sometimes Hertfordshire
    Posts
    17,283
    Great work on the block Stace. I'm a bit jealous of all the far you're buying at the moment.

    Oh and I can't wait for that parcel to clear customs either
    8P A3 TDI - 220bhp - 335lbft
    A3 Maintenance Thread
    Bye bye S3 you will be missed.
    S3 Build Thread







  20. #579
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099
    Cheers... I think matey

    Thoughts are if I don't get these bits in my possession asap then the chances of doing so and finishing the car will be massively reduced once loose part of the other halfs income and have to feed another mouth

    Think chances of actually finishing it and getting this lot installed before mid sept are slim to none

    That box has many bits of car porn in it and am gagging to see it all
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  21. #580
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099
    Lots of car porn has arrived today from IE and ATP

    Pistons





    Overview of most of the bits (upside down I know was in a rush)



    Rods



    Tial mvr 44mm





    Manual tensioner



    Paddle friction plate from southbend to go with my existing smf and pressure plate



    Tial turbine housing 0.82ar which in the flesh seems tiny compared to the old one, I suspect to being cast stainless





    Various injectors



    Casualty bent gasket possibly saved



    Just got an order of some oem bits including crank and I'm ready to roll

    Really can't wait
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  22. #581
    Westy's Avatar
    Double Dark Side! Diesel & 8P

    Status
    Online
    Join Date
    Dec 2008
    Location
    Cambridgeshire sometimes Hertfordshire
    Posts
    17,283
    I love car porn
    8P A3 TDI - 220bhp - 335lbft
    A3 Maintenance Thread
    Bye bye S3 you will be missed.
    S3 Build Thread







  23. #582
    <tuffty/>'s Avatar
    Badger 5 Edition

    Status
    Online
    Join Date
    Sep 2008
    Location
    Gloucestershire
    Posts
    15,602
    Went for the coatings on teh pistons then... nice work

    What comp ratio?

    <tuffty/>
    Silver 2001 AMK S3. Silver alcantara interior... now with added powarrrrrrrr, torques. VAGCOM + KII-USB. >> My build thread...

  24. #583
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099
    9.0 comp ratio as the 0.4mm (iirc) thinner headgasket should bring the comp ratio up a little bit, did read somewhere that it brings it up about 0.3/0.4 which with the head having a bit off am hoping will end up around 9.5?

    Haven't done any calcs but that is all guesstimations people please correct me if they know what they're talking about
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  25. #584
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099
    Well I think I may have a few issues

    I drove to Dorset yesterday for a long weekend camping and car was absolutely fine through the 190 mile trek but after leaving it sitting for a couple of hours, I went to move it to a different space it had an EPC fault light up and idle just seemed slightly erratic

    I was a bit preoccupied yesterday with setting the tent etc up and having a good few sherbets so haven't looked at it till now to find these fault codes on the liquid

    17950
    17972
    17579

    I've quickly looked them up on google and suspect the throttle body has **** the bed?

    Anyones ideas or experiances on faults like this would really be appreciated as got to get home on Monday and am really limited to what I've got with me (iPhone with patchy signal as in the sticks and a small tool kit which I always keep with me)

    I'm going to attempt to take the car for a drive in a bit once peoples are awake around me as have reset the fault codes and will go from there
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  26. #585
    Westy's Avatar
    Double Dark Side! Diesel & 8P

    Status
    Online
    Join Date
    Dec 2008
    Location
    Cambridgeshire sometimes Hertfordshire
    Posts
    17,283
    Do you think the WMi has killed it? Welly has been through 2 I think as the WMI gets in the electric part and eats at the PCB.

    Drop me a text if you need any help.
    8P A3 TDI - 220bhp - 335lbft
    A3 Maintenance Thread
    Bye bye S3 you will be missed.
    S3 Build Thread







  27. #586
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099
    I had suspected that as went through 2/3's of a tank of meth getting here and was my first fears but have been telling myself that hopefully it's a glitch and dont need a new TB?

    Cheers mate will possibly be giving you shout when I've had a play
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  28. #587
    Westy's Avatar
    Double Dark Side! Diesel & 8P

    Status
    Online
    Join Date
    Dec 2008
    Location
    Cambridgeshire sometimes Hertfordshire
    Posts
    17,283
    Have you removed the boost hose and checked the actuall butterfly flap is able to move freely?
    8P A3 TDI - 220bhp - 335lbft
    A3 Maintenance Thread
    Bye bye S3 you will be missed.
    S3 Build Thread







  29. #588
    Prawn's Avatar
    My other car is a MINI!!!!

    Status
    Offline
    Join Date
    Dec 2006
    Location
    Basingstoke
    Posts
    9,377
    Welly had this, as did my mate Dan with an LCR, lasted for 6 months or so, then the water somehow got into the circuitry on his TB and it started playing up a treat.

    He removed the plastic cover on the TB and it was full of water!
    -------------------------------------------------------------------------------------------------

    Prawns TFSI Turbo'd 1.8T Track Car

    But I know nothing so ignore me.

  30. #589
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099
    Well had it off and took it apart and there wasn't anything out of the ordinary but when started up idle was still rough

    Took it for a drive and all seems a lot better

    Idle is now steady and drives fine, I suspect there was a bit of **** on the contacts for the variable resistor and opening and closing it a few times has cleared it

    When I get home I will clean it with some electrical solvent cleaner and hopefully that'll see me through to when I put the r32 TB on with the new inlet

    A couple of pics anyhow







    Cheers for the help etc guys as was really panicking I would be stuck in Dorset after the weekend

    Suppose I have still got to make it but all seems well now
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  31. #590
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099

    Stacey's Belated Yo Yo Build Thread

    Little update

    Went to AITP and had a brilliant time, the clubstand was impressive eapecially after inters, was good to meet a couple more of you as well as see some familiar faces
    Had to add that the Saturday night at the holiday inn was also a laugh and will hopefully be doing it again

    The only downside of the weekend was getting a crack in the windscreen from a rather large stone on the way there, does anyone know if the rubber strip above the screen gets replaced when the screen does or do I have to buy one?

    Had a bit of spare time at work so I thought I'd start stripping and cleaning the head up as my valvetrain is now in the country from INA who sorted me out a really good price







    Should hopefully be sending this off shortly for some work as well as new valvetrain etc to be installed

    The only other problem I've had lately is the throttle body has played up since bringing up fault codes once more and having rough idle occasionally but each time I turn the meth off and reset the codes and all seems to be well after a few miles, think I may need the meth off most of the time until the work is all done as will be changing the TB to a R32 TB with the bigger inlet Mani then don't need this one any more so if it lasts until then it's a bonus
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  32. #591
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099

    Stacey's Belated Yo Yo Build Thread

    Well the valvetrain has arrived



    If anyone else is going to be purchasing some ferrea valvetrain in the near future please give me a shout as could save you some £££
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  33. #592
    Welly's Avatar
    VX220 SC Driver :)

    Status
    Offline
    Join Date
    Aug 2009
    Location
    Gloucestershire
    Posts
    10,695
    Excuse me whilst I just nurse my semi....
    ------------------------------------------------------------------------------------------
    "Marriage is like a coffin and each kid is another nail."
    Homer Simpson





  34. #593
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099

    Stacey's Belated Yo Yo Build Thread

    Lmao it does get me a wee bit excited
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  35. #594
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099

    Stacey's Belated Yo Yo Build Thread

    Yesterday was a bit of a light day

    I had a ballast fail on one of my lights which I had already replaced a year earlier but anyhow ordered another pair from eBay for £40 to get me going again and should remain with one spare for if another Chinese ballast goes again lol

    I had to cut the connectors off of the end and resplice them on there once had put the cable through the gland





    Pic of the ballast under the headlight



    Whilst I was at it I thought I may as well give the headlights a proper going over with wet and dry as had tried a few weeks back with a megulars refurb kit but still was pretty poor

    Here's a couple of shots of a completed one with the other left to attack







    I'm really chuffed with the results and the photos really don't do them any justice to how bad they were, it makes the car look so much newer and better from the front end

    I also whilst I was at it decided to fit some LED fog lamp bulbs that I had attempted at an earlier date and couldn't fit as they have 170 SMD's per lamp iirc and it made them slightly to big to fit in the mounting hole in the fog lamp housing.....so out came the dremmel to open them up a bit and now looks sweet as a nut
    Will upload some pics of the lights on when I get a chance
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  36. #595
    "Stick a V8 in it!"

    Status
    Online
    Join Date
    Jan 2008
    Location
    Glenrothes, Fife, Scotland
    Posts
    15,388
    What did you do to the headlights?

    I need to do the same to some of mine. I went over them with 1500 paper which removed the marks i wanted rid of, but now they're all hazy. Do i need to just use a few finer grades? Or do i need to use some sort of rotary polisher with cutting compound?

    2000 A4 1.8T Sport Quattro Avant, Berry Pearl
    2000 A4 1.8T Sport Quattro Saloon, Black-ish
    1997 S4 - PPC £999 Challenge Track Car Build
    TD5 Land Rover Defender build


  37. #596
    <tuffty/>'s Avatar
    Badger 5 Edition

    Status
    Online
    Join Date
    Sep 2008
    Location
    Gloucestershire
    Posts
    15,602
    Quote Originally Posted by aragorn View Post
    What did you do to the headlights?

    I need to do the same to some of mine. I went over them with 1500 paper which removed the marks i wanted rid of, but now they're all hazy. Do i need to just use a few finer grades? Or do i need to use some sort of rotary polisher with cutting compound?
    How to in the stickies

    <tuffty/>
    Silver 2001 AMK S3. Silver alcantara interior... now with added powarrrrrrrr, torques. VAGCOM + KII-USB. >> My build thread...

  38. #597
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099

    Stacey's Belated Yo Yo Build Thread

    I could only get my hands on 800 and 1200 wrt and dry so went over with both of them then went over a few times with the megulars headlight restoration kit (polishing pad and plasti rx) to polish the haze out

    Pretty much the stickies guide

    May do a guide for the headlight ballast replacement when I get a chance because iirc audi will try and pull your pants down and sell you a complete new headlight where as for a little bit of work can fit aftermarket ones (all be it not as reliable) but a for a small percentage of the price and does exactly the same job?
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  39. #598
    <tuffty/>'s Avatar
    Badger 5 Edition

    Status
    Online
    Join Date
    Sep 2008
    Location
    Gloucestershire
    Posts
    15,602
    I have considered going for a 55watt unit over the normal 35watt to see if I can improve the rather crap headlight beam thats std with our cars... even the missus fiesta has better lights!

    <tuffty/>
    Silver 2001 AMK S3. Silver alcantara interior... now with added powarrrrrrrr, torques. VAGCOM + KII-USB. >> My build thread...

  40. #599
    StaceyS3's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,099

    Stacey's Belated Yo Yo Build Thread

    Yeah I was really torn this time but thought at least if I got another 35w I've now got spares

    Would be keen to see how they fair up though
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  41. #600
    "Stick a V8 in it!"

    Status
    Online
    Join Date
    Jan 2008
    Location
    Glenrothes, Fife, Scotland
    Posts
    15,388
    Problem with 55w is no-one makes proper 55w lamps. Philips and Osram only make 35w ones, so you end up with not only a chungwa ballast but chungwa bulbs too.

    2000 A4 1.8T Sport Quattro Avant, Berry Pearl
    2000 A4 1.8T Sport Quattro Saloon, Black-ish
    1997 S4 - PPC £999 Challenge Track Car Build
    TD5 Land Rover Defender build


 

 

Similar Threads

  1. My build thread....
    By S3 Big Andy in forum A3/S3/Sportback (8P Chassis)
    Replies: 315
    Last Post: 18th February 2014, 20:58
  2. A4 Build Thread
    By AudiSport in forum Audi S4/A4/A4 Cab (B7 Chassis)
    Replies: 37
    Last Post: 4th September 2011, 09:45
  3. My Build Thread
    By Triple.O.G in forum Audi S4/A4/A4 Cab (B7 Chassis)
    Replies: 4
    Last Post: 1st August 2011, 20:36
  4. A4 Build Thread
    By AudiSport in forum Audi S4/A4/A4 Cab (B7 Chassis)
    Replies: 0
    Last Post: 20th November 2010, 22:14
  5. My Build Thread....
    By L0WRiDE in forum A3/S3 Forum (8L Chassis)
    Replies: 3
    Last Post: 9th May 2009, 20:28

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO