More problems.. Brake booster pipe from inlet to master cylinder and maf

[Andrew@A.L.D]

Found out i have a small split in my brake booster hose from my inlet to the master cylinder so this could be the problem with my poor idle

Does anyone have the part number for this pipe and the rubber grommet that sits in the master cylinder

Also my maf died today but lucky me i have two spares in the boot 10 mins later everything is well. This mafless tune i have been looking into is starting to look better for me so i've ordered some 4 in boost hose and a big *** Blitz stainless steel filter

 

[S3 Paul]

Do you mean the kind of U bend on the end of the inlet manifold.
I bought a Ebay item like a Forge one and its been spot on.

 

[Andrew@A.L.D]

No the plastic pipe from that to the brake booster servo master cylinder

 

[Dani_B19]

So the pipe thats goes down near the bulk head behind the heat shielding?

 

[Andrew@A.L.D]

So the pipe thats goes down near the bulk head behind the heat shielding?

thats the one

Going to get a new seal and new pipe

 

[Dani_B19]

Herm, may have to check that, did you pop the heat sheild out to check t properly?

 

[Andrew@A.L.D]

Mine has been removed because of the bt

 

[MUSH]

Probs be best to get some heatshielding down there otherwise the heat will just kill another hose when refitted.