how to adjust rear coilovers???

dplovin

Registered User
Joined
Jan 11, 2011
Messages
398
Reaction score
8
Points
18
Location
cheshire
how do you adjust the ride height on the rear coilovers anyone?
 
You should have a tool that you attach and then wind up or down, there may be a locking nut to losen first, sorry if this is not too clear but best i can describe.

DC
 
The rear springs should be sitting on an adjusting plate that'll look a little something like this:

DSC00909.jpg


Often people take out the adjuster (blue bit in this case) to get an extra few mm, if this has been done you will be unable to adjust height without it.

Hope this helps!
 
use a C spanner to wind the adjuster plate down. or take it out to drop it to its lowest :)
 
When I use the C spanner on mine.. The whole lot spins! Very annoying
 
jack the car up to take some weight off or do the nut up tighter which holds the adjuster plate in place