Monster MotorsportChris Nott
Page 11 of 23 FirstFirst ... 45678910111213141516171821 ... LastLast
Results 401 to 440 of 914
Like Tree86Likes

Thread: My S3 Thread

  1. #401
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,638
    These arrived:



    They look really well built. I had some compbrake mounts on my 205 and they were mickey mouse compared to these! They have needle roller bearings on the top spring pan so that the rose joint isn't forced to rotate, reducing it's load capacity. Even though mine are used, they look very well made. I've enquired about the price of a pair of new rose joints. It's not 100% essential but one has very slight play and I'd hate to have to take them off again.

    Stock piling a fair bit of gear. Keen to get it all on. Just need to find some time...
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  2. # ADS
    ADS
    Join Date
    Always
    Location
    Global
    Posts
    Many
     
  3. #402
    ZAS
    Neutral

    Status
    Offline
    Join Date
    Jun 2012
    Posts
    64
    I know how you feel about the stockpiling, I've got **** piling up to my ears at the moment and I'm waiting for some parts from Integrated Engineering and Bill before I can get anything on the car, so it's frustrating just watching the thing sit there getting dirty...

  4. #403
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,638
    Haha yeah it's a bit annoying but I know that it's just easier to hit it all in one go and it'll be an awesome change to have fresh fluids, bushes and the suspension all sorted. Looking forward to it!

    Engine will come later. The current engine is pretty solid.
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  5. #404
    vrbob's Avatar
    Thats no Moon, Thats a space station!

    Status
    Offline
    Join Date
    Jun 2007
    Location
    Southampton
    Posts
    2,284
    Quote Originally Posted by Sam_ View Post
    Haha yeah it's a bit annoying but I know that it's just easier to hit it all in one go and it'll be an awesome change to have fresh fluids, bushes and the suspension all sorted. Looking forward to it!

    Engine will come later. The current engine is pretty solid.
    Your engine is proper solid if its getting the figures in your sig mate
    Audi S3 8L BAM 225 2002 - Ming Blue : Silver Heated Leather, Armrest, RNS-E - Bose, Alloy Mirrors, 18" RSTT`s, Sunroof, Cruise, AutoDim Mirror & Usual S3 Extras.
    Mods : Badger 5 Stg 2 Custom Map, FMIC, 3" DP & 200 Cell Cat, 007P, Jetex Filter & 80mm TIP & Heatshield, Complete LED Kit, Gen VW Aero Wipers, Full Powerflex Kit, R32 RARB, AP Shocks & Springs, 15mm Front & 20mm Rear Spacers, BB Uprated Actuator,
    N249 Delete & Catch Can, AP TVR 4Pot Brakes & DS2500`s, Sachs Carbon/Kevlar Clutch

  6. #405
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,638
    Cheers - it might not be 280bhp but it certainly logged that figure and runs well enough for me so not too fussed right now.

    A mate was trying to sell me a freshly built 2.0L BAM engine today, Audi Motorsport AGU head and cams, girdled block, twin plate clutch, rebuilt box with kevlar synchros and a peloquin LSD. Loadsa $$ mind you but enough to take a GT30/35 without sweating.
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  7. #406
    Jpd89's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Jun 2012
    Location
    West Sussex
    Posts
    101
    Nice project mate! im the same, my room full of spare parts waiting for some attention!

  8. #407
    ZAS
    Neutral

    Status
    Offline
    Join Date
    Jun 2012
    Posts
    64
    Quote Originally Posted by Sam_ View Post
    Haha yeah it's a bit annoying but I know that it's just easier to hit it all in one go and it'll be an awesome change to have fresh fluids, bushes and the suspension all sorted. Looking forward to it!

    Engine will come later. The current engine is pretty solid.
    That's what I'm looking forward to the most, sorted suspension; the Koni Sports, new bushes/top mounts are going to ignite my love for the car again. I'm leaving the engine stock for now while I figure out if there are any major issues.

    Thanks for pointing me to Integrated Engineering, I slapped together an order with them for the crank breather adapter kit, and also decided to get their adapters to fit FSI coils, along with some nice Denso plugs for when I do remap the car. Along with that I purchased their solid shifter bushes to stiffen up the gearshift a bit more, just hope it has the desired effect.

    And my Badger5 goodies are on the way with some extra Forge hotness.

    There goes the kid's college fund; I either have to buy everything I want and squash the bug, or quit while I'm ahead...
    Pity I discovered the 034 Motorsport site the other night.

    JB

  9. #408
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,638
    Exactly - I'd much rather have a tight 270 odd hp S3 that handled well than a 400hp+ one with knackered bushes etc. Plus engine mods are so much more expensive when they involve internals!

    I just found these:
    MK4 Tubular Front Control Arms (pair) [SUSPMK4TARM] - $525.00 : USRT, Usually Sideways Rally Team

    Could be a costly find...
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  10. #409
    ZAS
    Neutral

    Status
    Offline
    Join Date
    Jun 2012
    Posts
    64
    While I'm here, can anyone tell me if this will fit an S3:

    Breather Hose, Lower Block Breather, MkIV 1.8T 06A - 034Motorsport | Performance Parts for Audi, Porsche, and Volkswagen

    Looks pretty nifty, and I think I'd rather take this option over the billet bits where I have to put together my own piping etc. etc., so if this works I'll remove that from my order and spend some dosh with 034 Motorsport.

  11. #410
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,638
    Not sure if that would - I remember seeing that when I had my issues but I just left it and went with the simplification.

    Picked up the discs and sump tonight and had a chat with Seb. Looks like the GT28 build will start at the end of September. Going 2.0 stroker with an .86 housing.



    (p.s. I know the disc/caliper combo is wrong (it's a nearside caliper on an offside disc) - I just grabbed the first disc )

    I'll have another attempt at fitting them soon, possibly this weekend...
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  12. #411
    <tuffty/>'s Avatar
    Badger 5 Edition

    Status
    Online
    Join Date
    Sep 2008
    Location
    Gloucestershire
    Posts
    15,023
    I think a GT28 will be too small for a stroker mate... better off going 3071r...

    <tuffty/>
    Silver 2001 AMK S3. Silver alcantara interior... now with added powarrrrrrrr, torques. VAGCOM + KII-USB. >> My build thread...

  13. #412
    Pushing the limits..

    Status
    Online
    Join Date
    Jan 2011
    Location
    Australia
    Posts
    1,227

    My Social Networking

    Add Sevv on Facebook
    i just realized i msg'ed you about that got gt30 or gt35 if you intend on getting a 1k $ civic haha ... although i like your thinking want to do the same

  14. #413
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,638
    Really? Well the GT28 has the .86 housing (rather than the usual .64) as that's what he ran it in his S3. Seemed to make good power but I take you point. I'm guessing you'd recommend a T3 or vband GT30 and not the T25 internal gated one?
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  15. #414
    Pushing the limits..

    Status
    Online
    Join Date
    Jan 2011
    Location
    Australia
    Posts
    1,227

    My Social Networking

    Add Sevv on Facebook
    ill be using the for the gt35 Sam but still thinking Integrated Engineering Top Mount T3 Turbo Manifold for 1.8T... pretty tight at the back of that engine

  16. #415
    <tuffty/>'s Avatar
    Badger 5 Edition

    Status
    Online
    Join Date
    Sep 2008
    Location
    Gloucestershire
    Posts
    15,023
    Quote Originally Posted by Sam_ View Post
    Really? Well the GT28 has the .86 housing (rather than the usual .64) as that's what he ran it in his S3. Seemed to make good power but I take you point. I'm guessing you'd recommend a T3 or vband GT30 and not the T25 internal gated one?
    The hotside isn't the issue... GT28 is small airflow wise for a 2ltr really... makes 360/370 ringing its tads off on a 1,8....

    GT3071r will be nice... have a read of this...
    James' LCR - 2008cc Stroker HTA GT3071r! BIG Turbo Build - SEAT Cupra.net - SEAT Forum

    Tial hotside and tubular mani... nice combo... T3 or v-band will work... what you can lay your hands on manifold wise will dictate I guess...

    The LCR in the thread uses a 0.82 Tial hotside and a billet comp wheel... very nice spool... the TSR mani has smallish runners though which will help along with the 2ltr capacity of course...

    StaceyS3 is building a similar spec but using a GTX comp wheel...

    <tuffty/>
    Silver 2001 AMK S3. Silver alcantara interior... now with added powarrrrrrrr, torques. VAGCOM + KII-USB. >> My build thread...

  17. #416
    <tuffty/>'s Avatar
    Badger 5 Edition

    Status
    Online
    Join Date
    Sep 2008
    Location
    Gloucestershire
    Posts
    15,023
    ...and external gate all day long on a GT30 ;P

    <tuffty/>
    Silver 2001 AMK S3. Silver alcantara interior... now with added powarrrrrrrr, torques. VAGCOM + KII-USB. >> My build thread...

  18. #417
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,638
    Yeah I totally take your point but the guy doing it is adamant that the GT28 is "enough" and when he had it on a stroker he said he made around 400hp (can't remember the figure he told me). Do they really not perform as well on the VAG engines as on others? SR20s seem to respond well to them...
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  19. #418
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,638
    Not a huge amount of progress - been a bit lazy with the car but I fitted the Brembo 6 pots and ECS discs today. Wasn't that easy in the end, worked out it took about 6 hours with a very pissed off mrs at the end of it. Had to grind the hubs a touch, cut the adapter to hub bolts (new caliper bolts) and then had issues with wheel clearance. In the end I had to run 25mm spacers on the front (was 15mm) and 30mm rear (was 20mm), suffice to say there's a bit of, what the cool kids are calling, "poke" up front. Wicked yo! There was another guy building a B5 S4 wagon with RS4 lump in the workshop, it's going to be a monster. I'll try to get some pics of it as it gets completed.

    Not got any pics as I literally finished when it got dark but they're working well and I did the classic pedal pump bleed (didn't push it to the floor mind you) and had no issues. I'll take some tomorrow if the mrs lets me wash it (I'm in the dog house).
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  20. #419
    lorryz's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Apr 2012
    Location
    Sydney, Australia
    Posts
    102
    Haha, they're finally on the car. Good stuff.

    I bet they look ridiculous.

  21. #420
    StaceyS3's Avatar
    6th Gear

    Status
    Online
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,040

    My S3 Thread

    Quote Originally Posted by Sam_ View Post
    Not a huge amount of progress - been a bit lazy with the car but I fitted the Brembo 6 pots and ECS discs today. Wasn't that easy in the end, worked out it took about 6 hours with a very pissed off mrs at the end of it. Had to grind the hubs a touch, cut the adapter to hub bolts (new caliper bolts) and then had issues with wheel clearance. In the end I had to run 25mm spacers on the front (was 15mm) and 30mm rear (was 20mm), suffice to say there's a bit of, what the cool kids are calling, "poke" up front. Wicked yo! There was another guy building a B5 S4 wagon with RS4 lump in the workshop, it's going to be a monster. I'll try to get some pics of it as it gets completed.

    Not got any pics as I literally finished when it got dark but they're working well and I did the classic pedal pump bleed (didn't push it to the floor mind you) and had no issues. I'll take some tomorrow if the mrs lets me wash it (I'm in the dog house).
    Nice one mate

    Those Calipers do really take a lot to clear them or just very good spoke design
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  22. #421
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,638
    Yeah they're big buggers. Wheels stick out a little and rubbed on a big speed bump earlier but we'll see. A bit of camber on the front might help. I've wanted TD Pro Race 2 for a while but can't really sink much more in the car for a bit. Need to fit all the bits I have stockpiled first.

    Here's a bad iphone pic:

    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  23. #422
    StaceyS3's Avatar
    6th Gear

    Status
    Online
    Join Date
    Dec 2010
    Location
    Maldon, Essex
    Posts
    2,040

    My S3 Thread

    Very nice mate but do need some better pics....I do try hard to get you good pics
    Power & Torque 335bhp 285ftlb
    0-60 4.64 1/4 mile 13.02
    My GTX3071r Build Thread
    http://www.audi-sport.net/vb/a3-s3-f...ld-thread.html

  24. #423
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,638
    I'll buy a calendar and take some pics tomorrow haha
    StaceyS3 likes this.
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  25. #424
    Pushing the limits..

    Status
    Online
    Join Date
    Jan 2011
    Location
    Australia
    Posts
    1,227

    My Social Networking

    Add Sevv on Facebook

    Re: My S3 Thread

    Some one needs to wash there car lol... nice work Sam.. thats exactly why i went with tarox 6pots no hastle no nothing

  26. #425
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,638
    Yeah, might do it today...

    The Tarox kits would possibly be easier but probably still run into wheel clearance issues. I also wanted 2 piece discs to save some weight. The "kits" are usually more expensive than putting together your own. Might save a couple of hours fitting but not really worth it for the price difference. Plus I wanted Brembo's...
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  27. #426
    Pushing the limits..

    Status
    Online
    Join Date
    Jan 2011
    Location
    Australia
    Posts
    1,227

    My Social Networking

    Add Sevv on Facebook
    Quote Originally Posted by Sam_ View Post
    Yeah, might do it today...

    The Tarox kits would possibly be easier but probably still run into wheel clearance issues. I also wanted 2 piece discs to save some weight. The "kits" are usually more expensive than putting together your own. Might save a couple of hours fitting but not really worth it for the price difference. Plus I wanted Brembo's...
    i guess not sure how much you spent but 980pounds for brakes isn't cheap nor too expensive...and you don't run into clearance issues plus with everything the front brake kit (both sides) weighs just under 10KG's which isn't bad considering they are lighter then brembo's ":P... btw saw your AGu Lump in the back of Sebs Golf R... good to see your progress btw

  28. #427
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,638
    I could almost guarantee if you're running 1 piece 334mmx32mm discs, they'll be heavier. I thought we'd been through all the weights and stuff before. You like your Tarox kit. I like Brembos that are used by OEM manufacturers and used on race cars alike. You win
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  29. #428
    Pushing the limits..

    Status
    Online
    Join Date
    Jan 2011
    Location
    Australia
    Posts
    1,227

    My Social Networking

    Add Sevv on Facebook
    Quote Originally Posted by Sam_ View Post
    I could almost guarantee if you're running 1 piece 334mmx32mm discs, they'll be heavier. I thought we'd been through all the weights and stuff before. You like your Tarox kit. I like Brembos that are used by OEM manufacturers and used on race cars alike. You win
    hehe.. yeah we did i think with that website you so nicely gave me its said 10. something KG's IIRC... im just teasing you mate, as the kit has given you allot of grief

  30. #429
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,638
    Haha they weren't that bad. I think it's just that I've not been climbing under cars for a while and was working in the 34c sun which made the job seem so much worse.

    Anyhow, here's a few more pics:







    They fill the wheels a tiny bit better than the old brakes.
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  31. #430
    Pushing the limits..

    Status
    Online
    Join Date
    Jan 2011
    Location
    Australia
    Posts
    1,227

    My Social Networking

    Add Sevv on Facebook

    Re: My S3 Thread

    Its looking really nice mate must... say much cleaner love the wheels too:thumbup:

  32. #431
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,638
    Cheers dude. Bushes and fluids next. Want to get it 'mint' mechanically before I go fitting the new engine + turbo.
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  33. #432
    h100vw's Avatar
    1st Gear

    Status
    Offline
    Join Date
    Aug 2006
    Location
    Down South, next stop Antarctica
    Posts
    215
    It's taken me a while to read this one. Some good work Sam.

    Gavin
    Delivering Custom-Code to Australians. www.custom-code.co.uk

  34. #433
    Pushing the limits..

    Status
    Online
    Join Date
    Jan 2011
    Location
    Australia
    Posts
    1,227

    My Social Networking

    Add Sevv on Facebook

    Re: My S3 Thread

    Yeah same thing me sam trying my best to get it mint hopefully after this session of repairs ill be done also doing the pcv simplification..

    Btw. Are you the bushes on your own?

  35. #434
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,638
    Cheers Gavin. It's getting there.

    I might get Seb to do them but he's always busy so might just take it there and do them bit by bit myself. I don't think it'll be that bad (famous last words). I'm going to do the rear arms (x4), arb and droplinks, haldex, rear diff fluid myself.

    The brakes are feeling better every time I drive the car. They're like OEM feel wise but bite harder, the pedal travel might be slightly more but there's much more "there" when you need it, if that makes any sense. The drive to and from work tomorrow should bed them in nicely :-)
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  36. #435
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,638
    Drove to work again this morning and either I must have had really bad fluid, or not properly bled, OE fronts or the pedal travel issue is overrated because the pedal feel isn't that bad at all. They start working at the same point but have much better feel. Perhaps people with the longer travel are running the 17z (larger pistons), didn't bleed the inner nipple or just didn't bleed them properly?
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  37. #436
    Pushing the limits..

    Status
    Online
    Join Date
    Jan 2011
    Location
    Australia
    Posts
    1,227

    My Social Networking

    Add Sevv on Facebook
    you have to bleed from the nipple.. at first i didnt bleed at the nipple simply just pumping the brake peddle until i read somewhere it wasnt advised do to popping the seals on the MC .. then used Ezi Bleed .. do it at the nipple i use RBF600 at the peddle is quite firm and sensitive i must say

  38. #437
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,638
    You mean the bleed nipple on the MC? Well sure, if you remove all fluid or let the MC get low then you need to bleed the MC. The key is not to let the MC get low so as you bleed from the calipers, top it up. It's also ideal to get everything fitted and checked (clearance etc) and then flip over the plumbing at the last minute so you don't loose to much fluid, also making bleeding easier.

    I'd read about this whole flipping the MC seals but I think you'd have to be unlucky and/or have an old MC. I didn't push the pedal right to the floor (increasing the chances as the MC would travel more) each time as it's not needed. Seb has never heard of the MC seal flipping and he's worked as a VW Technician and in the Aussie race team for quite a while. DaveB (widely regarded as a brake expert) believes it to be a myth too. That's not to say it doesn't happen (it's happened to a couple of people on here I believe) but like I say, it's got to be age and luck related, otherwise it's a fairly huge design flaw!
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  39. #438
    Pushing the limits..

    Status
    Online
    Join Date
    Jan 2011
    Location
    Australia
    Posts
    1,227

    My Social Networking

    Add Sevv on Facebook
    Quote Originally Posted by Sam_ View Post
    You mean the bleed nipple on the MC? Well sure, if you remove all fluid or let the MC get low then you need to bleed the MC. The key is not to let the MC get low so as you bleed from the calipers, top it up. It's also ideal to get everything fitted and checked (clearance etc) and then flip over the plumbing at the last minute so you don't loose to much fluid, also making bleeding easier.

    I'd read about this whole flipping the MC seals but I think you'd have to be unlucky and/or have an old MC. I didn't push the pedal right to the floor (increasing the chances as the MC would travel more) each time as it's not needed. Seb has never heard of the MC seal flipping and he's worked as a VW Technician and in the Aussie race team for quite a while. DaveB (widely regarded as a brake expert) believes it to be a myth too. That's not to say it doesn't happen (it's happened to a couple of people on here I believe) but like I say, it's got to be age and luck related, otherwise it's a fairly huge design flaw!

    agreed with you on all counts, but thats how i did it to be safe mate... i replaced my MC got a brembo one as i had the same issues my peddle would travel right down even after bleeding it properly so it would def have to do with the piston size.. im running 6 pots too and had that issue.

    do you get to the point say ur doing 100km/s you touch the peddle nothing happens as you keep pressing and reach half way the car brake slightly hard ? maybe you'd need to bleed it again perhaps ?

  40. #439
    Sam_'s Avatar
    Down under

    Status
    Offline
    Join Date
    Mar 2011
    Location
    Sydney, Australia
    Posts
    2,638
    Possibly. The pedal feel is never going to be spot on with the larger calipers. Mine don't feel hugely different to OEM, if anything they are better. That might be because my old discs/pads were shagged and calipers needed to be bled but who knows. I remember when I had a 205 and fitted Brembo 4 pots I fitted a larger MC. Something I'm not sure is possible on the mk4. I did read somewhere about a T5 (Transporter) MC that fits but not seen solid evidence of anyone doing it.
    Handling mods++. GTX30 soon-ish. Hiding parts from the mrs since 2011. Build thread

  41. #440
    Pushing the limits..

    Status
    Online
    Join Date
    Jan 2011
    Location
    Australia
    Posts
    1,227

    My Social Networking

    Add Sevv on Facebook
    i guess you should be happy then... you just get used to it 6 pots need uprated MC's its a defo me thinks

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO