Size of boost pipe from turbo to charge pipe

[gez]

Afternoon. Just ordering a load of silicone pipes.
Anyone know the inside diameter of the elbow that goes between the turbo outlet and the charge pipe???
My car is not here so i cannot measure it myself. Thanks

 

[Dani_B19]

Think its 70mm.

 

[Dani_B19]

Also the forge one's are specaily designed as the temps the elbow will have to endure will kill standard 5ply silicone elbows.

 

[DavidW]

What he said ^^

Don't try and make your own out of standard silicone tubing, this bit needs to be the real deal high temperature job.

 

[s3dave]

They are different sizes on each end

 

[<tuffty/>]

+1 Forge...

<tuffty/>

 

[cecilthesausage]

90 to 70 It is

 

[Dane]

I measured the oem one when i had it off and they were 53mm small to 67 mm large give or take a few mm

+2 for Forge