EM TuningAH Fabrications
Page 9 of 11 FirstFirst ... 234567891011 LastLast
Results 321 to 360 of 401
Like Tree4Likes

Thread: MUSH Developments` S3

  1. #321
    RIP S3dave

    Status
    Offline
    Join Date
    May 2004
    Location
    nr Glos
    Posts
    7,183
    get some airflow the oil cooler... it will need it.
    is this in addition to the water cooler as std?
    **http://www.facebook.com/Badger5Ltd**

    NEW NEW NEW eShop now LIVE>
    www.badger5.biz

    Badger 5 Ltd, Queen Annes Gate, Oldends Lane, Stonehouse, Glos, GL10 2DG


    http://www.badger5.co.uk, Tel:01453822880
    bill@badger5.co.uk
    **NEW** Badger5 Section CLICK here>> http://www.audi-sport.net/vb/213-badger-5/

  2. # ADS
    ADS
    Join Date
    Always
    Location
    Global
    Posts
    Many
     
  3. #322
    MUSH's Avatar
    MUSH Developments Ltd.

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Newcastle
    Posts
    712
    Airflow to the cooler will be good, its just that the plastic wheel arch liner could possibly be chopped and meshed over to aid airflow to go through as currently theres just the standard slits in the liner.


    The oem oil/water cooler is ditched at the minute, as the original was minging. But id happily reinstate it as the pipes are still there, just bunged up.
    Audi S3 1.9 GT30....




    ....that is all

  4. #323
    RIP S3dave

    Status
    Offline
    Join Date
    May 2004
    Location
    nr Glos
    Posts
    7,183
    Hmmm. Had similar type install come thru here, cooler sat same position, no ducting... and it ran hot.. unless airflow can get thru it its heatsinking not heat exchanging to air.. You should be able to duct some air from up front to it.

    You have oil temp measurement in car yea to keep an eye on proceedings?
    Big Bang Yam likes this.
    **http://www.facebook.com/Badger5Ltd**

    NEW NEW NEW eShop now LIVE>
    www.badger5.biz

    Badger 5 Ltd, Queen Annes Gate, Oldends Lane, Stonehouse, Glos, GL10 2DG


    http://www.badger5.co.uk, Tel:01453822880
    bill@badger5.co.uk
    **NEW** Badger5 Section CLICK here>> http://www.audi-sport.net/vb/213-badger-5/

  5. #324
    MUSH's Avatar
    MUSH Developments Ltd.

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Newcastle
    Posts
    712
    Ducting it is then, ill get some knocked up from the bumper apperture direct to the cooler.

    Temp monitoring will be from the liquid gauge.
    Audi S3 1.9 GT30....




    ....that is all

  6. #325
    1st Gear

    Status
    Offline
    Join Date
    Oct 2011
    Location
    Somewhere?
    Posts
    147
    Looking good mate. Will have to pop up and you can take me out in it so i can see how 400 horses feel like in an s3 haha.

  7. #326
    MUSH's Avatar
    MUSH Developments Ltd.

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Newcastle
    Posts
    712
    Quote Originally Posted by Eddy_s3 View Post
    Looking good mate. Will have to pop up and you can take me out in it so i can see how 400 horses feel like in an s3 haha.
    Course mate, cant bloody wait, this was meant to be a couple of months project before the house got in the way!!
    Audi S3 1.9 GT30....




    ....that is all

  8. #327
    <tuffty/>'s Avatar
    Badger 5 Edition

    Status
    Offline
    Join Date
    Sep 2008
    Location
    Gloucestershire
    Posts
    15,594
    Quote Originally Posted by MUSH View Post
    Course mate, cant bloody wait, this was meant to be a couple of months project before the house got in the way!!
    Always the way :D

    2 years and counting!!

    <tuffty/>
    Silver 2001 AMK S3. Silver alcantara interior... now with added powarrrrrrrr, torques. VAGCOM + KII-USB. >> My build thread...

  9. #328
    Reverse Gear

    Status
    Offline
    Join Date
    Dec 2010
    Location
    surrey
    Posts
    15
    nice job keep up the good work :P

  10. #329
    MUSH's Avatar
    MUSH Developments Ltd.

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Newcastle
    Posts
    712
    Quote Originally Posted by oubas2 View Post
    nice job keep up the good work :P
    Cheers bud, its coming along

    Got the pod back from my pals shop. One tin of christmas biscuits as payment and it was covered in the correct material. Light isnt good in the car so i had to get the garage torch on the go to take a photo...



    Ill get daylight pics soon, but im happy with how it looks!

    And lit up with the clocks...



    Got some 4 inch cold air feed pipe ordered to knock up a cold air duct for the oil cooler. Ill also chop out the wheel arch liner and mesh over. Might aswell as itll only take a few mins and the cooler cant exactly be too cold. My bumper removal procedure is honed to a fine art with an approximate timescale of about 22 seconds. lol
    Audi S3 1.9 GT30....




    ....that is all

  11. #330
    Dani_B19's Avatar
    Audi-sports own special child.

    Status
    Online
    Join Date
    Nov 2008
    Location
    Barnsley
    Posts
    7,233
    Looks spot on mush. Where you wired it into?
    Driving the most secretive S3 on ASN

  12. #331
    MUSH's Avatar
    MUSH Developments Ltd.

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Newcastle
    Posts
    712
    Headlight switch directly underneath it bud, comes on with the sidelights.
    Audi S3 1.9 GT30....




    ....that is all

  13. #332
    Dani_B19's Avatar
    Audi-sports own special child.

    Status
    Online
    Join Date
    Nov 2008
    Location
    Barnsley
    Posts
    7,233
    Sound. You dont remember which wires/colour? Need to wire mine in still haha.
    Driving the most secretive S3 on ASN

  14. #333
    MUSH's Avatar
    MUSH Developments Ltd.

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Newcastle
    Posts
    712
    Not a clue Dan, the grounds are easy as there brown so i just used a multimeter, black probe on the brown then turned the switch on and prodeded the red probe til i found 12v when sidelights on. Checked by turning the switch on/off again then soldered them in. 5 min job mate
    Audi S3 1.9 GT30....




    ....that is all

  15. #334
    Dani_B19's Avatar
    Audi-sports own special child.

    Status
    Online
    Join Date
    Nov 2008
    Location
    Barnsley
    Posts
    7,233
    Ok fair dos.

    Bit of a daft question but hey lol. Does the gauge need 1 live feed and then 1 earth feed? Not got a clue about electrics, well car ones haha. I used a 9v square duracell battery to test the guage light worked, one feed on one connector and other feed on other connector haha.
    Driving the most secretive S3 on ASN

  16. #335
    MUSH's Avatar
    MUSH Developments Ltd.

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Newcastle
    Posts
    712
    Yup mate, a ground and a 12v feed.
    Audi S3 1.9 GT30....




    ....that is all

  17. #336
    beachbuggy's Avatar
    6th Gear

    Status
    Offline
    Join Date
    Jan 2010
    Location
    Surrey
    Posts
    1,745
    Out of interest when you fitted the ecu I sold you did it just plug straight in? Am I right you had a auq ecu fitted and upgraded this to the BAM? How did that work did you change the loom as well to a bam loom or is it the original loom?

  18. #337
    MUSH's Avatar
    MUSH Developments Ltd.

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Newcastle
    Posts
    712
    Just plugged straight in mate. The AUQ and BAM engine looms are electrically identical, just a slightly different layout to cater for the different inlet manifolds. The compartment loom is only different in the sense that the BAM has the EGT plug (which i added anyways) and it doesnt have secondary air injection (which i previously deleted). So my looms were "BAM" spec anyways, hence the plug n play addition of a different ecu.

    Audi S3 1.9 GT30....




    ....that is all

  19. #338
    1st Gear

    Status
    Offline
    Join Date
    Oct 2011
    Location
    Somewhere?
    Posts
    147
    When you looking to get it back on the road then? Hows the extention going?
    Should have mine sorted by the weekend i hope but if your free you could pop up and give me a hand with wiring and pipes and getting the engine back in tonight or tomorrow once you finish work if your free?

  20. #339
    MUSH's Avatar
    MUSH Developments Ltd.

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Newcastle
    Posts
    712
    Reet... Cars getting mot'd next month mate as im all spent up buying doors nd shizzle for the house. Extensions pretty much done building wise, now got the task of wiring/plumbing/boarding etc so still plenty to do. Had the week off it this week after i finished the roof and got it watertight.

    Ill bell you and come up
    Audi S3 1.9 GT30....




    ....that is all

  21. #340
    MUSH's Avatar
    MUSH Developments Ltd.

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Newcastle
    Posts
    712
    Well after giving Chris a hand yesterday with his S3 i thought i clean mine up. Just give it a basicwash but it looks the dogs dangleys. Just a few pics to show...






    Couldnt help myself so i took it in the estate again, theres only room for 3 gears but it drove perfectly. Not a great deal happens before 3krpm and it only builds then but at 3.5krpm it finds its legs and lets loose. Only boosting to 0.5bar at the minute which is perfect as its only on actuator pressure. Feels good though. Roll on a few weeks and itl be mot'd

    Audi S3 1.9 GT30....




    ....that is all

  22. #341
    patTTpoa's Avatar
    4th Gear

    Status
    Offline
    Join Date
    Oct 2011
    Location
    Devon
    Posts
    793
    I like the wheels, what are they?

    Pat






  23. #342
    MUSH's Avatar
    MUSH Developments Ltd.

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Newcastle
    Posts
    712
    They are votex wheels and were an optional extra for mk1 TTs

    They came with the car with brand new michelin pilot sports all round so theyre going to stay on. I quite like them aswell.
    Audi S3 1.9 GT30....




    ....that is all

  24. #343
    patTTpoa's Avatar
    4th Gear

    Status
    Offline
    Join Date
    Oct 2011
    Location
    Devon
    Posts
    793
    They are nice!
    Wouldn't mind a set myself

    Pat






  25. #344
    MUSH's Avatar
    MUSH Developments Ltd.

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Newcastle
    Posts
    712
    They might be dare i say "rare"....?

    I certainly havnt seen them before i had them
    Audi S3 1.9 GT30....




    ....that is all

  26. #345
    patTTpoa's Avatar
    4th Gear

    Status
    Offline
    Join Date
    Oct 2011
    Location
    Devon
    Posts
    793
    I'm looking now, & I can't find them!
    So you could be right in saying they are rare!

    Pat






  27. #346
    1st Gear

    Status
    Offline
    Join Date
    Oct 2011
    Location
    Somewhere?
    Posts
    147
    Was looking good when i was up at the weekend mate. The car looks immaculate. Love the engine bay, Very tidy Bet you cant wait to get it on the road. I have your N75 you lent me here, al drop it off at the weekend. Feel free to pup up mine on friday for it if your local. al be fitting my new intercooler :D

  28. #347
    Neutral

    Status
    Offline
    Join Date
    May 2010
    Posts
    78
    Such an enthralling build process Mush. Kept me awake during work today!

    You a mechanic by trade or you very enthusiastic? How did you learn all this stuff? Fascinating!

    Seán

  29. #348
    MUSH's Avatar
    MUSH Developments Ltd.

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Newcastle
    Posts
    712
    Quote Originally Posted by Eddy_s3 View Post
    Was looking good when i was up at the weekend mate. The car looks immaculate. Love the engine bay, Very tidy Bet you cant wait to get it on the road. I have your N75 you lent me here, al drop it off at the weekend. Feel free to pup up mine on friday for it if your local. al be fitting my new intercooler :D
    No worries mate ill catch up with you soon. Let me know when youre fitting your cooler and ill give a hand!


    Quote Originally Posted by Seansy View Post
    Such an enthralling build process Mush. Kept me awake during work today!

    You a mechanic by trade or you very enthusiastic? How did you learn all this stuff? Fascinating!

    Seán
    Cheers Seán, it keeps me busy! Lol

    Im not a mechanic by trade but im quite handy and ive been taking things apart since i can remember. I used to help my dad restore his citroen 2CV and Dianes in the same garage and then ever since its been my garage, for my projects...

    Just how i roll...
    Last edited by MUSH; 20th November 2011 at 17:39.
    Audi S3 1.9 GT30....




    ....that is all

  30. #349
    Neutral

    Status
    Offline
    Join Date
    May 2010
    Posts
    78
    Gifted b@%*~#d!!

    Will be great to see this some day in the flesh. Next years show scene I will keep an eye out for it.

    Seán

  31. #350
    MUSH's Avatar
    MUSH Developments Ltd.

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Newcastle
    Posts
    712
    Quote Originally Posted by Seansy View Post
    Gifted b@%*~#d!!
    How rude....lol

    Cheers mate ill look forward to it

    Nick
    Audi S3 1.9 GT30....




    ....that is all

  32. #351
    1st Gear

    Status
    Offline
    Join Date
    Oct 2011
    Location
    Somewhere?
    Posts
    147
    Quote Originally Posted by MUSH View Post
    No worries mate ill catch up with you soon. Let me know when youre fitting your cooler and ill give a hand!

    Cool mate, it will probs be next weekend now. That's if Mr silicone hurry's up and sends me out new pipes

  33. #352
    MUSH's Avatar
    MUSH Developments Ltd.

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Newcastle
    Posts
    712
    Decided to get some ducting down to the oil cooler whilst i had some spare time tonight. This is obviously on the recommendation from others, mainly Bill to ensure theres a good flow of air through the cooler. Last thing i want is for the oil to overheat, thin too much and kill the rings or shells.

    Apologies for the poor pics, as is obvious is that i did this job at night, under the warm bright hue of a few site spec halogens...

    Started off by sorting the lighting and tooling required, then getting the bumper ready for removal (AGAIN)...



    And this is how the cooler sits to begin with...



    I had to drop the oil cooler and at first i thought id remove the front of the arch liner in small pieces in the position of where the cooler sat...



    But then i decided to hack a bit more out, whilst leaving a few strips in purely for strength...



    Looks a bit rough here, but i smartened it up a bit before cutting some mesh, and rivetting it over the aperture. I used small rivets and placed 4mm washers on the back so the rivet clamps the mesh and the arch liner between the washer and the rivet head...



    Then it was ducting time. I did purchase some 4inch cold air feed ducting but it seemed a bit small to be honest so i acquired some 6 inch ducting instead. I mocked it up with cable ties to see how long it needed to be, and when i was happy i cut it to length and tied it in final position so the ducting directly feeds the cooler...



    And then it was all about getting the bumper back on. It was tight around the foglight but the ducting is strengthened by thin metal wire so it was easy enough to bend into shape to accomodate this...



    So when i was happy with how it sat and that the ducting was as open as it could be with a direct feed to the cooler, i stealthed it up a little...



    So now even with the grille back on, you can hardly tell. Ill probs give the ducting another slight dusting with matte black to get rid of the slight shiny surface on the inside...



    So now im pretty damn confident that all airflow entering the lower fog grille will be directed straight to the cooler. After this ill be testing when driving to ensure the oil stays at a decent temp.

    Ive got a day off on the 14th Dec for my daughters christmas panto so im booking the car in that morning for the MOT!! woop woop. Should come back ok so i cant wait!

    Might take some more pics on saturday when the car comes out the garage as ive been roped into helping me pal do his SMF conversion with new clutch on his mk4 1.8t. Joy of joys....
    Audi S3 1.9 GT30....




    ....that is all

  34. #353
    s17atw's Avatar
    Neutral

    Status
    Offline
    Join Date
    Apr 2010
    Posts
    43
    looking good mate.............

  35. #354
    MUSH's Avatar
    MUSH Developments Ltd.

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Newcastle
    Posts
    712
    Quote Originally Posted by s17atw View Post
    looking good mate.............
    Cheers bud, ill bell you tomorrow!!
    Audi S3 1.9 GT30....




    ....that is all

  36. #355
    MUSH's Avatar
    MUSH Developments Ltd.

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Newcastle
    Posts
    712
    IWent for the MOT today and it passed!!! woop woop.

    Driving it on the roads and getting it tested did highlight a few problems but theres nothing major to be fair.

    The brake light switch is a bit temperamental. It worked fine when i tested the lights but typically it was being a bit dodgy at the test centre. I got it working again but it showed up as a fault code so may be an issue. What it might be as it is working now is just the fact that its been standing unused for 18 months so it may just be a bit sticky. Ill keep an eye on it anyway.

    The drivers seat backrest adjusting button doesnt work. This isnt the worst situation as i adjusted the seat to my preference when i first got the car, so again, maybe an issue from it standing for a while. Ill keep trying it and will most probably have a dig around when i get some time.

    Biggest issue though is that a code for low signal from number 1 knock sensor keeps popping up. They were definately torqued up correctly so ill have a look into that probably on the weekend and look to replace before going any further. Both knock sensors were second hand anyways, i had to change them when upgrading the engine loom as the later sensors are different.

    But apart from that the car was great. It flew through the MOT which was a relief, but to be honest i couldnt see there being any major problems as its obvious that the cars been looked after. It came with all new genuine brakes/ball joints and had brand fire new michelin pilot tyres all round so i didnt really have any doubt about any of the mechanics. When stripping and assembling for the suspension upgrades everything looked fine aswell.

    So how does it drive? Quite well to be fair. Low down is quite gutless but thats obviously to be expected. The car isnt mapped for the correct timing/airflow/capacity etc so im quite happy with it. Theres no boost being made and the difference in capacity isnt dialled in yet so its bound to be a bit down. It does go very well though with no clunks/rattles and the engine is still quite smooth. I remember when i bolted up the k04 to my AUQ lump in my mk2, as that felt quite similar, in the sense that the setup wasnt correct for the ECU but it still went well. Its not as smooth as it should be but the adaptions are only starting to take shape so im not worried. The car still drives nicely low down and then when 3-3.5k comes along the boost creeps and the power starts to feed through. The turbo boost control is still only running on wastegate spring pressure so boost rises nicely and settles at about 0.6bar which considering there is the 0.7bar spring fitted, is pretty good. Best bit is that theres been no issues with the engine or turbo setup. Thats where all the money and effort is and thats going fine with no nasty noises or leaks.

    One thing thats a big difference is clutch control. Being a Helix single plate flywheel and cerametallic clutch its certainly bitey. You can retain control and do it quite smoothly, but it just involves a bit of thought and foresight. Not that this bothers me as, id rather a setup man enough to take the stick it will certainly receive in the future! My girlfriend wasnt to impressed but thats most probably more down to the fact that she cant get insured on it.... Shes only been driving for just over a year now though so i politely reminded her that most newish drivers wouldnt get the opportunity to drive an S3 then either (never mind a highly modded example...)

    So i capped today off with getting the car taxed so its now fully road legal. Got robbed for December but i dont mind as i couldnt wait to get some miles on it. I covered 20 miles today which isnt a great deal but ill get the 4 wheel alignment adjusted before carrying on as the front is both toe out a little bit and the rears, even though they look good by my "eye adjustment" will still need attention after the coilover and S3dave tie bars installation.

    So overall im pretty damn happy, and cant wait to crack on with the next chapter which will be...

    -Sort the knock sensor issue
    -Wheel alignment
    -Drop the oil and replace (Engine/box/Haldex)
    -Get some more miles on it....
    Audi S3 1.9 GT30....




    ....that is all

  37. #356
    <tuffty/>'s Avatar
    Badger 5 Edition

    Status
    Offline
    Join Date
    Sep 2008
    Location
    Gloucestershire
    Posts
    15,594
    Feels good doesn't it

    'Well Jel' mate.. haven't driven mine for over a month and its killing me... roll on Saturday!!

    <tuffty?.
    Silver 2001 AMK S3. Silver alcantara interior... now with added powarrrrrrrr, torques. VAGCOM + KII-USB. >> My build thread...

  38. #357
    MUSH's Avatar
    MUSH Developments Ltd.

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Newcastle
    Posts
    712
    Quote Originally Posted by <tuffty/> View Post
    Feels good doesn't it

    'Well Jel' mate.. haven't driven mine for over a month and its killing me... roll on Saturday!!

    <tuffty?.
    Does indeed mate, its a new experience for me having only covered a few miles in this car. But thats all part of the fun!
    Audi S3 1.9 GT30....




    ....that is all

  39. #358
    superkarl's Avatar
    MAN OF STEEL

    Status
    Online
    Join Date
    Mar 2010
    Location
    Liverpool/Southport. N west
    Posts
    7,533
    so when is 'the' day, the day you get it mapped and drive home in a rocket ship with the biggest grin the world has ever seen??

  40. #359
    s17atw's Avatar
    Neutral

    Status
    Offline
    Join Date
    Apr 2010
    Posts
    43
    Champion, well done If you do end up needing a Knock sensor mate I think I have a few kicking around up here your welcome to...

  41. #360
    MUSH's Avatar
    MUSH Developments Ltd.

    Status
    Offline
    Join Date
    Jun 2010
    Location
    Newcastle
    Posts
    712
    Quote Originally Posted by superkarl View Post
    so when is 'the' day, the day you get it mapped and drive home in a rocket ship with the biggest grin the world has ever seen??
    Well well, the "day" of reckoning certainly isnt booked yet. But aslong as the running in goes smoothly then theres only two more jobs needed before mapping and they are the inlet manifold project, and the fuel pump. Id ideally like to keep the S3 injectors in and then swap to the 630cc's before mapping.

    Fingers crossed it all goes well i think itll be march when i get it mapped as i start a new uni module early next year so will be busy with that aswell.
    Audi S3 1.9 GT30....




    ....that is all

 

 
Page 9 of 11 FirstFirst ... 234567891011 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Single Sign On provided by vBSSO

Garage Plus, Vendor Tools vBulletin Plugins by Drive Thru Online, Inc.

Content Relevant URLs by vBSEO